New version v0.2:
+4% performance
Topic: [ANN] New AMD X17 miner VERGE/SHIELD/MLM - page 2. (Read 1651 times)
All AMD guys wanting to try are welcome at The HIVE
Pool: https://hive.gulfcoastmining.com/
Payouts every 2 hours
Pool pays all transaction fees
Low Payouts: 0.01 | 0.001 on Sundays
Hosted on Google's best-in-class Cloud
Sample mining string:
FOR POOL MINING SUPPORT AND COMMUNITY, JOIN OUR DISCORD
Discord - https://discord.gg/HX3ftkU
QueenBee Hive Mining Pool
VERGE x17
Pool: https://hive.gulfcoastmining.com/
Payouts every 2 hours
Pool pays all transaction fees
Low Payouts: 0.01 | 0.001 on Sundays
Hosted on Google's best-in-class Cloud
Sample mining string:
Code:
sgminer -k x17 -o stratum+tcp://hive.gulfcoastmining.com:3737 -u WALLETADDRESS -p c=XVG --gpu-threads 2 --worksize 256 --intensity 21
FOR POOL MINING SUPPORT AND COMMUNITY, JOIN OUR DISCORD
Discord - https://discord.gg/HX3ftkU
looks promising, I will definitely test it
now downloading the miner, my rig is a mix of some rx570 and vega card and I wonder will the miner work ok on it ?
I guess only test will tell, later today I will post feedback once I choose the pool to mine verge, by the way any advice on it?
now downloading the miner, my rig is a mix of some rx570 and vega card and I wonder will the miner work ok on it ?
I guess only test will tell, later today I will post feedback once I choose the pool to mine verge, by the way any advice on it?
yiimp.eu is a good pool to mine Verge, but it got saturated the last time Verge raised (way too many people jumped in).
zpool.ca is a also a good pool and, in fact, more rewarding due to mine the most profitable X17 coin(s), and you can get paid in Verge if they're actively mining it (they are at the moment), which usually results in more XVG paid per MH/s.
The BAT example I included in the miner uses zpool.ca for this reason. Just make sure you leave c=XVG as password and use your XVG address as username to get paid in Verge.
not working with the parameters posted.
RX580 windows 10, adrenaline 18.3.4 drivers in compute mode. tried it on my test system with a single 580 in it.
i get a switching to devpool at startup, and then sgminer errors out.
I'll try again on the next version.
RX580 windows 10, adrenaline 18.3.4 drivers in compute mode. tried it on my test system with a single 580 in it.
i get a switching to devpool at startup, and then sgminer errors out.
I'll try again on the next version.
Try with --gpu-threads 1, some systems can't run 2 threads per GPU. Also, sometimes the miner doesn't start properly after first execution (due to first compilation), but it works as expected from there.
The miner switches to devpool at startup just to open the connection (and keeps it open), then switches back to user pool.
Tested on RX480 produces 5.5Mh/s on a standard BIOS without changing memory timings and overclocking. I run the miner itself without using the bat file. The pool shows a speed of 8.1Mh/s. later I will try with optimized timings.
Upd. If you use settings from a bat file hashrate rise to 6.3Mh/s
Upd. If you use settings from a bat file hashrate rise to 6.3Mh/s
not working with the parameters posted.
RX580 windows 10, adrenaline 18.3.4 drivers in compute mode. tried it on my test system with a single 580 in it.
i get a switching to devpool at startup, and then sgminer errors out.
I'll try again on the next version.
RX580 windows 10, adrenaline 18.3.4 drivers in compute mode. tried it on my test system with a single 580 in it.
i get a switching to devpool at startup, and then sgminer errors out.
I'll try again on the next version.
looks promising, I will definitely test it
now downloading the miner, my rig is a mix of some rx570 and vega card and I wonder will the miner work ok on it ?
I guess only test will tell, later today I will post feedback once I choose the pool to mine verge, by the way any advice on it?
now downloading the miner, my rig is a mix of some rx570 and vega card and I wonder will the miner work ok on it ?
I guess only test will tell, later today I will post feedback once I choose the pool to mine verge, by the way any advice on it?
Some one tested it on RX550 cards, and how it work on 2Gb version?
good job, i will check
Hello everyone,
This is the first version of the Aeris sgminer for the X17 algorithm.
Specs:
This miner is based on sgminer-gm-5.5.5, but the source code is not available for now (let the war against me begin).
For the time being, I want to keep the ASM kernels I'm making (they are not great yet, but they'll improve), but I will eventually release the source code.
The devfee is 15 seconds of every 750 seconds, starting 60 seconds after the miner starts.
Unfortunately for now, if multiple pools are specified, only the first one is used.
Set the following enviroment variables (windows code example)
Recommended settings for RX 570/580 cards:
Recommended settings for RX Vega cards:
Use less intensity for slower cards (i.e. 19-20 for cards that mines at 2~4MH/s).
Some systems can't run 2 threads per GPU. If the miner exists, try with --gpu-threads 1.
Reducing intensity may improve rejection due to stale shares.
Windows version only. You may need to install Microsoft Visual C++ Redistributable 2013/2015 (x86) if it is not in your system already.
Linux version will come too if enough interest is showed.
v0.1
initial version
v0.2
+4% performance
Download
https://mega.nz/#F!v6JSXBqK!2jQLwNjgaIV3IoN8OHgfzw
This is the first version of the Aeris sgminer for the X17 algorithm.
Specs:
- RX 570/580 Hashrate: 5.9~6.9Mh/s depending on model/memory/oc settings (stock ~5.9MH/s, Stock with memory Mods ~6.9MH/s).
- RX Vega Hasrate: 11~12MH/s.
- 2% devfee.
This miner is based on sgminer-gm-5.5.5, but the source code is not available for now (let the war against me begin).
For the time being, I want to keep the ASM kernels I'm making (they are not great yet, but they'll improve), but I will eventually release the source code.
The devfee is 15 seconds of every 750 seconds, starting 60 seconds after the miner starts.
Unfortunately for now, if multiple pools are specified, only the first one is used.
Set the following enviroment variables (windows code example)
Code:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Recommended settings for RX 570/580 cards:
Code:
sgminer -k x17 -o pool -u user -p password --gpu-threads 2 --worksize 256 --intensity 21
Recommended settings for RX Vega cards:
Code:
sgminer -k x17 -o pool -u user -p password --gpu-threads 2 --worksize 256 --intensity 22
Use less intensity for slower cards (i.e. 19-20 for cards that mines at 2~4MH/s).
Some systems can't run 2 threads per GPU. If the miner exists, try with --gpu-threads 1.
Reducing intensity may improve rejection due to stale shares.
Windows version only. You may need to install Microsoft Visual C++ Redistributable 2013/2015 (x86) if it is not in your system already.
Linux version will come too if enough interest is showed.
v0.1
initial version
v0.2
+4% performance
Download
https://mega.nz/#F!v6JSXBqK!2jQLwNjgaIV3IoN8OHgfzw
Jump to: