Topic: [ANN] New Primecoin Pool + GPU Miner - page 10. (Read 19667 times)
not up yet?
What about CPU usage?
2or4or6*280X on Athlone x270 dual core
2or4or6*280X on Athlone x270 dual core
Still reindexing... will take another 15min.
Cool cool can't wait
Still reindexing... will take another 15min.
pool is not working
Connectingo to frontend: 54.187.143.168:6666
and it stays there.... ill keep mining with PrimeGPU in the meanwhile
Connectingo to frontend: 54.187.143.168:6666
and it stays there.... ill keep mining with PrimeGPU in the meanwhile
Miner can't connect for 10 minutes now...
captain? fix?
captain? fix?
I had to reindex the blockchain, because it got corrupt during DDOS fire.
It's still reindexing and will take a while, like 1h, sry.
EDIT: I made the mistake of opening the primecoin port 9911, so the attackers were able to flood the "bitcoin" server with invalid data...
It's still reindexing and will take a while, like 1h, sry.
EDIT: I made the mistake of opening the primecoin port 9911, so the attackers were able to flood the "bitcoin" server with invalid data...
Keep up the good work!
I think xpm is certainly worst coin, I ever seen:
* in terms of fee
* fairplay
rename xpm to mafiacoin it will certainly fits more its purpose
* in terms of fee
* fairplay
rename xpm to mafiacoin it will certainly fits more its purpose
haha +1
I think xpm is certainly the worst coin, I ever seen:
* in terms of fee
* fairplay
* totally defeat the purpose behind cryptocurrency
rename xpm to mafiacoin it will certainly fits more its purpose
* in terms of fee
* fairplay
* totally defeat the purpose behind cryptocurrency
rename xpm to mafiacoin it will certainly fits more its purpose
I had to reindex the blockchain, because it got corrupt during DDOS fire.
It's still reindexing and will take a while, like 1h, sry.
EDIT: I made the mistake of opening the primecoin port 9911, so the attackers were able to flood the "bitcoin" server with invalid data...
It's still reindexing and will take a while, like 1h, sry.
EDIT: I made the mistake of opening the primecoin port 9911, so the attackers were able to flood the "bitcoin" server with invalid data...
i still dont connect ...
tracert 54.187.143.168
19 202 ms 201 ms 201 ms 205.251.232.153
20 199 ms 235 ms 223 ms 205.251.232.165
21 * * * Превышен интервал ожидания для запроса.
22 * * * Превышен интервал ожидания для запроса.
23 ^C
usa block rus traffic
tracert 54.187.143.168
19 202 ms 201 ms 201 ms 205.251.232.153
20 199 ms 235 ms 223 ms 205.251.232.165
21 * * * Превышен интервал ожидания для запроса.
22 * * * Превышен интервал ожидания для запроса.
23 ^C
usa block rus traffic
DDOS happening!!
First they tried the website, but failed.
Now they go after the primecoin server. In any case, if the server crashes your miners will pause and wait to reconnect.
First they tried the website, but failed.
Now they go after the primecoin server. In any case, if the server crashes your miners will pause and wait to reconnect.
Getting the following before the program closes:
C:\Users\Ivan\Desktop\madPrimeMiner-v1.0-rc0-T10-w32>xpmclient
madPrimeMiner-v1.0-T10
ClientName = 'IVANLABRIE' ClientID = 951955625 InstanceID = 2300866414
Address = 'AT4iEgpfXBDqth1k8tQU5Bb57z9mchwgY9'
Found 2 devices
Using device 0 as GPU 0
Using device 1 as GPU 1
N=11 SIZE=4096 STRIPES=420 WIDTH=20 PCOUNT=40960 TARGET=10
GPU 0: has 32 CUs
GPU 0: hash primorial = 30030 (14 bits)
GPU 0: sieve primorial = 435656388001 (58 bits)
GPU 0: sieve size = 5505 (7 bits)
GPU 0: max bits used 341/352
N=11 SIZE=4096 STRIPES=420 WIDTH=20 PCOUNT=40960 TARGET=10
GPU 1: has 32 CUs
GPU 1: hash primorial = 30030 (14 bits)
GPU 1: sieve primorial = 435656388001 (58 bits)
GPU 1: sieve size = 550556388001 (7 bits)
GPU 1: max bits used 341/352
Connecting to frontend: 54.187.143.168:6666 ...
Connecting to bitcoin: 54.187.143.168:60000 ...
Connecting to signals: 54.187.143.168:60001 ...
Work received: height=529682 diff=10.890427 latency=1071ms
error: ProbablePrimeChainTestFast 0/3
error: ProbablePrimeChainTestFast 0/3
er
C:\Users\Ivan\Desktop\madPrimeMiner-v1.0-rc0-T10-w32>
i7 3820
2x4gb samsung 1600mhz cl11 ram
2 x msi gaming r9 280x cards
win 8 64
cat 14.4
C:\Users\Ivan\Desktop\madPrimeMiner-v1.0-rc0-T10-w32>xpmclient
madPrimeMiner-v1.0-T10
ClientName = 'IVANLABRIE' ClientID = 951955625 InstanceID = 2300866414
Address = 'AT4iEgpfXBDqth1k8tQU5Bb57z9mchwgY9'
Found 2 devices
Using device 0 as GPU 0
Using device 1 as GPU 1
N=11 SIZE=4096 STRIPES=420 WIDTH=20 PCOUNT=40960 TARGET=10
GPU 0: has 32 CUs
GPU 0: hash primorial = 30030 (14 bits)
GPU 0: sieve primorial = 435656388001 (58 bits)
GPU 0: sieve size = 5505 (7 bits)
GPU 0: max bits used 341/352
N=11 SIZE=4096 STRIPES=420 WIDTH=20 PCOUNT=40960 TARGET=10
GPU 1: has 32 CUs
GPU 1: hash primorial = 30030 (14 bits)
GPU 1: sieve primorial = 435656388001 (58 bits)
GPU 1: sieve size = 550556388001 (7 bits)
GPU 1: max bits used 341/352
Connecting to frontend: 54.187.143.168:6666 ...
Connecting to bitcoin: 54.187.143.168:60000 ...
Connecting to signals: 54.187.143.168:60001 ...
Work received: height=529682 diff=10.890427 latency=1071ms
error: ProbablePrimeChainTestFast 0/3
error: ProbablePrimeChainTestFast 0/3
er
C:\Users\Ivan\Desktop\madPrimeMiner-v1.0-rc0-T10-w32>
i7 3820
2x4gb samsung 1600mhz cl11 ram
2 x msi gaming r9 280x cards
win 8 64
cat 14.4
Seems like the Intel Core cpu's have a GMP issue.
I'm having no issues like that with AMD or Core2 Quad cpu's.
Hi,
Thank you, finally one for Linux!! I was lazy to try out other's XPM miners as all of my rigs are Linux.
Just downloaded Linux version and testing with a 5xR270. Seems working but all the set core and powertune failed.
Does it even support R270? I will test with 7950/7970 later.
The followings are the corresponding error messages.
It looks like ADL doesn't work.Thank you, finally one for Linux!! I was lazy to try out other's XPM miners as all of my rigs are Linux.
Just downloaded Linux version and testing with a 5xR270. Seems working but all the set core and powertune failed.
Does it even support R270? I will test with 7950/7970 later.
The followings are the corresponding error messages.
I will test this on my linux machine and fix it if possible, until then you can ignore the errors and set your clocks with some other tool.
270/270X should work as they are GCN, but i don't know how the performance will be.
You should def. try lower sieve primorials with these, like 12 or 11 (see config.txt).
Hi madMax,
FYI, 270 works, not sure the clock rate it is using now but it gives ~2.2CPD each.
Question: how should I estimate the payout? The 2.2CPD is for 10ch I believe, so how should I expect # of 8 and 9ch per day?
Also is there any formula to give those payout for 8/9/10ch shares? I expected it is something related to the probabilities of getting each (after 10% for pool).
I'll test run it for 1 or 2 days, before I switch more rigs to your pool.
Thanks
when I oc, my GPU usage goes to 62% is that normal? I tried all drivers.
I have 2x sapphire 7950 Boost
Does setting cpu to 2 increase CPD?
1.) My 7950s with Boost have the same problem. When powertune kicks in the GPU usage can display weird numbers and the mining will slow down. On some drivers (like 14.4 for me) disabling powertune does not work. I have 2x sapphire 7950 Boost
Does setting cpu to 2 increase CPD?
2.) higher cpuload might increase CPD a little, but will use more power for sure as the GPUs can do the same work for much less energy.
Thank you very much, you use MSI afterburner to disable powertune in 14.3?
I am getting 3.1 CPD per 7950 @ 925/1250 you think it is ok or should it be more?
I'd say 95% of the 7950s will do 950-1000mhz core and 1500mhz memory clock. Give it a shot :p (you might be able to run them at 0.962v too)
Getting the following before the program closes:
C:\Users\Ivan\Desktop\madPrimeMiner-v1.0-rc0-T10-w32>xpmclient
madPrimeMiner-v1.0-T10
ClientName = 'IVANLABRIE' ClientID = 951955625 InstanceID = 2300866414
Address = 'AT4iEgpfXBDqth1k8tQU5Bb57z9mchwgY9'
Found 2 devices
Using device 0 as GPU 0
Using device 1 as GPU 1
N=11 SIZE=4096 STRIPES=420 WIDTH=20 PCOUNT=40960 TARGET=10
GPU 0: has 32 CUs
GPU 0: hash primorial = 30030 (14 bits)
GPU 0: sieve primorial = 435656388001 (58 bits)
GPU 0: sieve size = 5505 (7 bits)
GPU 0: max bits used 341/352
N=11 SIZE=4096 STRIPES=420 WIDTH=20 PCOUNT=40960 TARGET=10
GPU 1: has 32 CUs
GPU 1: hash primorial = 30030 (14 bits)
GPU 1: sieve primorial = 435656388001 (58 bits)
GPU 1: sieve size = 550556388001 (7 bits)
GPU 1: max bits used 341/352
Connecting to frontend: 54.187.143.168:6666 ...
Connecting to bitcoin: 54.187.143.168:60000 ...
Connecting to signals: 54.187.143.168:60001 ...
Work received: height=529682 diff=10.890427 latency=1071ms
error: ProbablePrimeChainTestFast 0/3
error: ProbablePrimeChainTestFast 0/3
er
C:\Users\Ivan\Desktop\madPrimeMiner-v1.0-rc0-T10-w32>
i7 3820
2x4gb samsung 1600mhz cl11 ram
2 x msi gaming r9 280x cards
win 8 64
cat 14.4
C:\Users\Ivan\Desktop\madPrimeMiner-v1.0-rc0-T10-w32>xpmclient
madPrimeMiner-v1.0-T10
ClientName = 'IVANLABRIE' ClientID = 951955625 InstanceID = 2300866414
Address = 'AT4iEgpfXBDqth1k8tQU5Bb57z9mchwgY9'
Found 2 devices
Using device 0 as GPU 0
Using device 1 as GPU 1
N=11 SIZE=4096 STRIPES=420 WIDTH=20 PCOUNT=40960 TARGET=10
GPU 0: has 32 CUs
GPU 0: hash primorial = 30030 (14 bits)
GPU 0: sieve primorial = 435656388001 (58 bits)
GPU 0: sieve size = 5505 (7 bits)
GPU 0: max bits used 341/352
N=11 SIZE=4096 STRIPES=420 WIDTH=20 PCOUNT=40960 TARGET=10
GPU 1: has 32 CUs
GPU 1: hash primorial = 30030 (14 bits)
GPU 1: sieve primorial = 435656388001 (58 bits)
GPU 1: sieve size = 550556388001 (7 bits)
GPU 1: max bits used 341/352
Connecting to frontend: 54.187.143.168:6666 ...
Connecting to bitcoin: 54.187.143.168:60000 ...
Connecting to signals: 54.187.143.168:60001 ...
Work received: height=529682 diff=10.890427 latency=1071ms
error: ProbablePrimeChainTestFast 0/3
error: ProbablePrimeChainTestFast 0/3
er
C:\Users\Ivan\Desktop\madPrimeMiner-v1.0-rc0-T10-w32>
i7 3820
2x4gb samsung 1600mhz cl11 ram
2 x msi gaming r9 280x cards
win 8 64
cat 14.4
when I oc, my GPU usage goes to 62% is that normal? I tried all drivers.
I have 2x sapphire 7950 Boost
Does setting cpu to 2 increase CPD?
1.) My 7950s with Boost have the same problem. When powertune kicks in the GPU usage can display weird numbers and the mining will slow down. On some drivers (like 14.4 for me) disabling powertune does not work. I have 2x sapphire 7950 Boost
Does setting cpu to 2 increase CPD?
2.) higher cpuload might increase CPD a little, but will use more power for sure as the GPUs can do the same work for much less energy.
Thank you very much, you use MSI afterburner to disable powertune in 14.3?
I am getting 3.1 CPD per 7950 @ 925/1250 you think it is ok or should it be more?
when I oc, my GPU usage goes to 62% is that normal? I tried all drivers.
I have 2x sapphire 7950 Boost
Does setting cpu to 2 increase CPD?
1.) My 7950s with Boost have the same problem. When powertune kicks in the GPU usage can display weird numbers and the mining will slow down. On some drivers (like 14.4 for me) disabling powertune does not work. I have 2x sapphire 7950 Boost
Does setting cpu to 2 increase CPD?
2.) higher cpuload might increase CPD a little, but will use more power for sure as the GPUs can do the same work for much less energy.
Jump to: