Topic: [ANN] NEW USB MINER - 11-15 Gh/s NANO FURY 6 USB MINER, **$99.99** (Read 5215 times)
You're welcome Mike! Happy mining!
July 28, 2014, 09:09:51 PM
Decided to be a pig and just ordered the other! 
Thanks again!
Thanks again!
Got it. Sent you an email to verify. They will ship tomorrow Priority Mail.
Thanks!
Mike
July 28, 2014, 08:08:48 PM
Decided to be a pig and just ordered the other!
Thanks again!
Thanks again!
July 28, 2014, 07:16:39 PM
Thanks, thanks, thanks!
I just placed my order for one of the two, much appreciate you extending the opportunity!
I just placed my order for one of the two, much appreciate you extending the opportunity!
July 28, 2014, 06:25:24 PM
Hi Trevor -
We are almost out of stock, but I opened up two more July Specials for purchase. These will be the last ones and then we'll be sold out.
We are almost out of stock, but I opened up two more July Specials for purchase. These will be the last ones and then we'll be sold out.
July 28, 2014, 05:57:47 PM
Just added the July special. Three NF6 miners for $255. See the website for details.
moonlightminer.com
Aww, disappointed! Just got started BTC mining a week ago w/ my GPU, have ordered a few used Antminer U2s, and just now ran across the NF6 and here it is still July and the 3 for $255 is over -- bummer moonlightminer.com
JULY SPECIAL - 3x NF6 for $255
! 
July 13, 2014, 09:10:37 AM
Is there a way to run a start.bat
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I would like to just click on the start.bat file
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I would like to just click on the start.bat file
philipma - with a .bat file is exactly how I run my bfgminer and that should work just fine - if not you should post a note on the bfgminer thread as there are more people watching it which could help with troubleshooting it.
I've now switched to using a bfgminer.conf file and I start bfgminer directly - no need of a bat file. If you haven't created a config file you can tell bfgminer to save its current running configuration to a .conf file - press [ S ] to go to the settings screen and [ W ] to write the .conf file.
sounds goods
I did the s I did the w here is a screen shot my skill at writing is all cut and paste. I do not know how to write the file.
I would need a screen shot of one written so I could copy it and add in my solo btc info.
http://imagizer.imageshack.us/v2/1280x1024q90/840/v0x.png
Dude - you were right there - all you had to do was hit ENTER! :-)
Or enter a new file name and then hit ENTER.
I must have written in ten thousand words on set ups of bfgminer in the last 10 months.
Well I finally learned thanks.
A question about the 6 chip unit what is the lowest power watt per gh you got .
set at 45 or 40 freq and tweaking the volts with a different resistor.
these units could be sold as a long term lottery ticket mined at bitsolo.net
silent and cool at 40 freq if you could do lower watts per gh .
get one of these with a bfgminer 4.4.0 program on a usb stick for the programmed challenged.
did you assemble these your self?
I would love to have one capped at 10 or 9 gh but lower power use due to a different resistor.
And have the standard one for comparison.
July 13, 2014, 08:03:46 AM
Is there a way to run a start.bat
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I would like to just click on the start.bat file
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I would like to just click on the start.bat file
philipma - with a .bat file is exactly how I run my bfgminer and that should work just fine - if not you should post a note on the bfgminer thread as there are more people watching it which could help with troubleshooting it.
I've now switched to using a bfgminer.conf file and I start bfgminer directly - no need of a bat file. If you haven't created a config file you can tell bfgminer to save its current running configuration to a .conf file - press [ S ] to go to the settings screen and [ W ] to write the .conf file.
sounds goods
I did the s I did the w here is a screen shot my skill at writing is all cut and paste. I do not know how to write the file.
I would need a screen shot of one written so I could copy it and add in my solo btc info.
http://imagizer.imageshack.us/v2/1280x1024q90/840/v0x.png
Dude - you were right there - all you had to do was hit ENTER! :-)
Or enter a new file name and then hit ENTER.
July 13, 2014, 07:03:19 AM
Is there a way to run a start.bat
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I would like to just click on the start.bat file
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I would like to just click on the start.bat file
philipma - with a .bat file is exactly how I run my bfgminer and that should work just fine - if not you should post a note on the bfgminer thread as there are more people watching it which could help with troubleshooting it.
I've now switched to using a bfgminer.conf file and I start bfgminer directly - no need of a bat file. If you haven't created a config file you can tell bfgminer to save its current running configuration to a .conf file - press [ S ] to go to the settings screen and [ W ] to write the .conf file.
sounds goods
I did the s I did the w here is a screen shot my skill at writing is all cut and paste. I do not know how to write the file.
I would need a screen shot of one written so I could copy it and add in my solo btc info.
July 12, 2014, 10:02:40 PM
Is there a way to run a start.bat
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I would like to just click on the start.bat file
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I would like to just click on the start.bat file
philipma - with a .bat file is exactly how I run my bfgminer and that should work just fine - if not you should post a note on the bfgminer thread as there are more people watching it which could help with troubleshooting it.
I've now switched to using a bfgminer.conf file and I start bfgminer directly - no need of a bat file. If you haven't created a config file you can tell bfgminer to save its current running configuration to a .conf file - press [ S ] to go to the settings screen and [ W ] to write the .conf file.
July 12, 2014, 08:39:43 PM
I am still running your bi fury or fury II sticks. I just wish these had come out sooner rather then this late in the game.
I was look to run these at bitsolo.net
I run your fury II sticks at 49 freq pretty cool. I use bfgminer 4.4.0
Is there a way to run a start.bat
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I am typing in my entire btc address each time I restart it. a pain in the ass.
I would like to just click on the start.bat file
I was look to run these at bitsolo.net
I run your fury II sticks at 49 freq pretty cool. I use bfgminer 4.4.0
Is there a way to run a start.bat
bfgminer -o stratum+tcp://stratum.bitsolo.net:3334 -u my btc address -p my password
crashes so If I want to solo mine on bitsolo.net
I am typing in my entire btc address each time I restart it. a pain in the ass.
I would like to just click on the start.bat file
July 07, 2014, 02:14:29 PM
Have you taken any heat measurements with multiple in the same hub? The heat spreaders look like they may help, but the old ones got insanely hot and with a 10X speed increase I wonder how hot these are in a group.
I can take some measurements for you tomorrow. I have a 10 port hub with 5 NF6's running slightly overclocked. There is a USB fan on them and the surface temperature of the miners is 41C. Without the fan they would be about 72C-82C.
Because of their deepth you would not be able to fit more than 5 on a standard 10 port hub. If your hub ports are tightly packed you may not even fit 5.
I have 49 port hub on which I have run a maximum of 18 NF6's. The limitation there was more my PC than the hub itself.
July 06, 2014, 01:10:47 PM
Please give link to schematic NF6.
Schematic will not be released while current batch remains on sale. July 06, 2014, 01:09:28 PM
Have you taken any heat measurements with multiple in the same hub? The heat spreaders look like they may help, but the old ones got insanely hot and with a 10X speed increase I wonder how hot these are in a group.
I can take some measurements for you tomorrow. July 06, 2014, 12:38:04 PM
Have you taken any heat measurements with multiple in the same hub? The heat spreaders look like they may help, but the old ones got insanely hot and with a 10X speed increase I wonder how hot these are in a group.
July 06, 2014, 11:59:23 AM
Please give link to schematic NF6.
You'd have to ask here: https://bitcointalksearch.org/topic/nanofury-project-open-source-design-321287As I recall - but I can't find the post - it will only be open sourced once distributors who commissioned / licensed the design have been made whole. But if you have one in hand, reverse engineering a schematic from that shouldn't be too difficult. )
July 06, 2014, 11:38:10 AM
Please give link to schematic NF6.
June 30, 2014, 01:44:18 AM
thanks I was trying to figure if I could get better then 1 watt a gh on an underclock. so it looks like they don't save a lot of power on the lower clocks.
That's an interesting challenge ... I guess I can experiment a bit more in the next few days and find out
June 29, 2014, 08:26:52 PM
1) how much power does one use if I clock it at freq 40?
2) how much will it hash at freq 40?
2) how much will it hash at freq 40?
Those that at 54-56 bits do 12-16GH now at speed 40 do 6.9-8.2GH.
I'll have to separately set up the rig to measure the current consumption but I'd guesstimate it to be in the 0.7-0.9A.
3) will it use bfg 3.99 like the 2 chip ones you sold me?
You can most likely use the same version, but I would recommend upgrading to 4.0.0 as there were a few bugfixes and tweaks in between.
thanks I was trying to figure if I could get better then 1 watt a gh on an underclock. so it looks like they don't save a lot of power on the lower clocks.
I asked because I run a few 2x fury sticks at bitsolo.net
June 29, 2014, 08:19:06 PM
1) how much power does one use if I clock it at freq 40?
2) how much will it hash at freq 40?
2) how much will it hash at freq 40?
Those that at 54-56 bits do 12-16GH now at speed 40 do 6.9-8.2GH.
I'll have to separately set up the rig to measure the current consumption but I'd guesstimate it to be in the 0.7-0.9A.
3) will it use bfg 3.99 like the 2 chip ones you sold me?
You can most likely use the same version, but I would recommend upgrading to 4.0.0 as there were a few bugfixes and tweaks in between.
Jump to: