Pages:
Author

Topic: [ANN] NODECOIN [ND] - Masternodes - page 11. (Read 6474 times)

member
Activity: 210
Merit: 10
December 31, 2017, 11:27:52 PM
i think is not the best algo for this project.  Angry
full member
Activity: 252
Merit: 100
December 31, 2017, 11:26:26 PM
Something isn't adding up.

Nethash is 30 GH/s now (was 10-15 until a couple blocks ago).  I am 5 GH/s of that.  I'm 1/6th of Nethash (16%).  I started mining @ block 110.  There ahve been 45 blocks since I started.  I've solved two blocks.  That's 4.4%.  

That's an extreme divergence over a big enough sample size to say that something fucky is going on.

Edit/Clarity:  somebody is/was cycling with 100+ GH/s.

Im not nearly that much hash, but something isn't adding up for me either.
hero member
Activity: 2114
Merit: 619
December 31, 2017, 11:25:23 PM
ohhh so who pay first will have first MN from premine??

I don`t see logic there



if the money collected will be to list in exchanges, because it has no logic, if you buy something first that another person, you will get it before that person.

ilogico will get it after who buys much later that the first that the person has bought first

you have 750K premine with block 1-3, thats huge... if you believe in coin, don`t dump and give masternode so he can have more then 50% from POS!

I assure you that no landfill will be made, the pre-mine will be for what is determined
legendary
Activity: 1901
Merit: 1024
December 31, 2017, 11:24:03 PM
ohhh so who pay first will have first MN from premine??

I don`t see logic there



if the money collected will be to list in exchanges, because it has no logic, if you buy something first that another person, you will get it before that person.

ilogico will get it after who buys much later that the first that the person has bought first

you have 750K premine with block 1-3, thats huge... if you believe in coin, don`t dump and give masternode so he can have more then 50% from POS!
hero member
Activity: 2114
Merit: 619
December 31, 2017, 11:21:21 PM
#99
ohhh so who pay first will have first MN from premine??

I don`t see logic there



if the money collected will be to list in exchanges, because it has no logic, if you buy something first that another person, you will get it before that person.

ilogico will get it after who buys much later that the first that the person has bought first
full member
Activity: 364
Merit: 100
December 31, 2017, 11:21:14 PM
#98
Something isn't adding up.

Nethash is 30 GH/s now (was 10-15 until a couple blocks ago).  I am 5 GH/s of that.  I'm 1/6th of Nethash (16%).  I started mining @ block 110.  There ahve been 45 blocks since I started.  I've solved two blocks.  That's 4.4%. 

That's an extreme divergence over a big enough sample size to say that something fucky is going on.
the nethash is calc'd by the diff, which is supposed to be retargeted every 5 blocks according to the the op, but it's not.  you're probably just unlucky.  I'm 7gh and I found 6
newbie
Activity: 5
Merit: 0
December 31, 2017, 11:20:38 PM
#97
How to do it? I never did it Huh
you must configure your wallet as it says in the ANN in the pool section
I created the file nodecoin.conf with
    rpcuser= user
    rpcpassword=password1
    rpcallowip=127.0.0.1
    rpcport=29116
    daemon=1
    server=1
    listen=1
    gen=1

Launched wallet with -server.
Ccminer gives out like that
[2018-01-01 06:15:09] skein block 161, diff 0.00, net 112.99GH/s
[2018-01-01 06:15:39] GPU#4:EVGA GTX 1080 Ti, 1040.09MH/s
[2018-01-01 06:15:39] GPU#4:EVGA GTX 1080 Ti, 4.2MH/W, 0.53MH/Mhz
[2018-01-01 06:15:39] GPU#4:EVGA GTX 1080 Ti, 65C(F:81%) 1954/4498MHz(250W)
[2018-01-01 06:15:40] GPU#0:Gigabyte GTX 1080 Ti, 985.90MH/s
[2018-01-01 06:15:40] GPU#0:Gigabyte GTX 1080 Ti, 4.3MH/W, 0.53MH/Mhz
[2018-01-01 06:15:40] GPU#0:Gigabyte GTX 1080 Ti, 66C(F:81%) 1867/4498MHz(231W)
[2018-01-01 06:15:41] GPU#3:EVGA GTX 1080 Ti, 1033.73MH/s
[2018-01-01 06:15:41] GPU#3:EVGA GTX 1080 Ti, 4.2MH/W, 0.53MH/Mhz
[2018-01-01 06:15:41] GPU#3:EVGA GTX 1080 Ti, 61C(F:70%) 1934/4498MHz(247W)
[2018-01-01 06:15:41] GPU#2:ASUS GTX 1070 Ti, 689.32MH/s
[2018-01-01 06:15:41] GPU#2:ASUS GTX 1070 Ti, 3.9MH/W, 0.35MH/Mhz
[2018-01-01 06:15:41] GPU#2:ASUS GTX 1070 Ti, 53C(F:54%) 1987/3299MHz(175W)
[2018-01-01 06:15:41] GPU#1:ASUS GTX 1070 Ti, 704.75MH/s
[2018-01-01 06:15:41] GPU#1:ASUS GTX 1070 Ti, 4.1MH/W, 0.36MH/Mhz
[2018-01-01 06:15:41] GPU#1:ASUS GTX 1070 Ti, 53C(F:54%) 1976/3299MHz(172W)

diff 0.00 ?

It seems to me that something is wrong
legendary
Activity: 1901
Merit: 1024
December 31, 2017, 11:19:06 PM
#96
ohhh so who pay first will have first MN from premine??

I don`t see logic there

hero member
Activity: 2114
Merit: 619
December 31, 2017, 11:16:55 PM
#95
will the nodes devs be staking their 750k premine or using it for masternodes?

the wallet in which the premine is located has the configuration staking = 0
not staking, in the ANN clearly says the purpose of the premine:

for the promotion, for the configuration of the first master nodes, etc.
yes the ann might say that but nothing about it is clear.  the paint pictures are a distraction.  who are the first masternoders?  will they be activating their first masternodes today or tomorrow?

an online form will be created, where a BTC wallet will be left, people who wish to configure masternodes, they will have to register and send the transaction ID for the purchase of the 5000 ND and leave their wallet for the shipment, the list of purchases in the same section of masternodes.

the form for the registration and sending of btc will be available in a few hours, the people who first buy will be those who receive their first ND and configure their masternodes
member
Activity: 116
Merit: 10
December 31, 2017, 11:15:35 PM
#94
Something isn't adding up.

Nethash is 30 GH/s now (was 10-15 until a couple blocks ago).  I am 5 GH/s of that.  I'm 1/6th of Nethash (16%).  I started mining @ block 110.  There ahve been 45 blocks since I started.  I've solved two blocks.  That's 4.4%.  

That's an extreme divergence over a big enough sample size to say that something fucky is going on.

Edit/Clarity:  somebody is/was cycling with 100+ GH/s.
full member
Activity: 364
Merit: 100
December 31, 2017, 11:12:17 PM
#93
will the nodes devs be staking their 750k premine or using it for masternodes?

the wallet in which the premine is located has the configuration staking = 0
not staking, in the ANN clearly says the purpose of the premine:

for the promotion, for the configuration of the first master nodes, etc.
yes the ann might say that but nothing about it is clear.  the paint pictures are a distraction.  who are the first masternoders?  will they be activating their first masternodes today or tomorrow?
hero member
Activity: 2114
Merit: 619
December 31, 2017, 11:09:43 PM
#92
now we want to dig,
still no pool?

you can soloming
I think the pools will be available in 12 hours after the source code is released
How to do it? I never did it Huh

you must configure your wallet as it says in the ANN in the pool section

newbie
Activity: 5
Merit: 0
December 31, 2017, 11:08:11 PM
#91
now we want to dig,
still no pool?

you can soloming
I think the pools will be available in 12 hours after the source code is released
How to do it? I never did it Huh
member
Activity: 84
Merit: 10
December 31, 2017, 11:07:24 PM
#90
will the nodes devs be staking their 750k premine or using it for masternodes?


I WAS READY TO MINE THIS COIN BUT NOW NO NO NO....YOU GO FOR IT IF U WANT..

BUT IF U WANT REALLY HUGE PROFIT GO DIVVY COIN... GREAT NEWS COMING...  Wink Wink Wink
hero member
Activity: 2114
Merit: 619
December 31, 2017, 11:06:59 PM
#89
will the nodes devs be staking their 750k premine or using it for masternodes?

the wallet in which the premine is located has the configuration staking = 0
not staking, in the ANN clearly says the purpose of the premine:

for the promotion, for the configuration of the first master nodes, etc.
full member
Activity: 364
Merit: 100
December 31, 2017, 11:04:26 PM
#88
will the nodes devs be staking their 750k premine or using it for masternodes?
full member
Activity: 390
Merit: 100
December 31, 2017, 10:58:14 PM
#87
No legitimate pool will post unless source is available, you don't run random internet dudes bins.
hero member
Activity: 2114
Merit: 619
December 31, 2017, 10:58:02 PM
#86
now we want to dig,
still no pool?

you can soloming
I think the pools will be available in 12 hours after the source code is released
sr. member
Activity: 1106
Merit: 310
December 31, 2017, 10:57:47 PM
#85
When it comes to power and setup asic is a bit easy unlike gpu which is you need to reconfig everytime it crash or something happen
handy and easy for asic, but in gpu its a bit cheaper but takes more space,
its just depends on the user if which is one he/she like to use, but if you got lots of money ill do asic
not only it take small space its more powerful in just 1 piece of it take a lot of profit
newbie
Activity: 5
Merit: 0
December 31, 2017, 10:57:27 PM
#84
pool?
Never mine solo. How to do it?
Pages:
Jump to: