Pages:
Author

Topic: [ANN] [Phantomx] coin -> online currency [PNX] | Pow/PoS X11 Masternode - page 20. (Read 52483 times)

newbie
Activity: 83
Merit: 0
thanks, I am new in POS, that means I can offline my wallet now? no need open for POS?

 no need edit any files ?? because I see a member here said need to set the phantomx.conf > staking=1 // to receiving as PoS .. am I need to do that too? thanks

You should keep your wallet online to receive rewards and also set "staking=1" in settings to enable it.

You can read this thread for more info https://bitcointalksearch.org/topic/what-is-staking-1349402

where to set set "staking=1" ?? thanks
newbie
Activity: 70
Merit: 0
thanks, I am new in POS, that means I can offline my wallet now? no need open for POS?

 no need edit any files ?? because I see a member here said need to set the phantomx.conf > staking=1 // to receiving as PoS .. am I need to do that too? thanks

You should keep your wallet online to receive rewards and also set "staking=1" in settings to enable it.

You can read this thread for more info https://bitcointalksearch.org/topic/what-is-staking-1349402
newbie
Activity: 83
Merit: 0
any setting or requirement for the POS ??

I only have 100 coins, can I POS?? thanks all
Yes, any pile of coin can stake. Keep in mind that is takes 3 days for the coin pile to be valid for staking after any transaction. Once is staked - it will add 25 PNX to the pile, possibly split the pile in 2 halves if total is over 100-150PNX and later those new pile(s) should rest for another 3 days before get matured for staking again.

that means I need hold the 100 coins in my wallet and open my PC and wallet for min. 3 days? right? thanks

no, staking will start after 3 days coin received. then you need unexpecteble time, it depends your matured balance and network staking balance.

thanks, I am new in POS, that means I can offline my wallet now? no need open for POS?

 no need edit any files ?? because I see a member here said need to set the phantomx.conf > staking=1 // to receiving as PoS .. am I need to do that too? thanks
full member
Activity: 249
Merit: 100
Ehy Guys!!!

PHANTOMX is available on our Pool!!!
Low Fees and Good Support!!!

http://pnx.needlecoinpool.eu/




Visit our Mining Club
http://needlecoinpool.eu/
full member
Activity: 378
Merit: 105
Hi ! Phantomx is available on LycheeBit.
Happy mining Smiley

Mining Phantomx with x11 algo :

  • Stratum  : lycheebit.com:3533
  • User     : YOUR_PNX_ADDRESS
  • Password : c=PNX

LycheeBit info :


Mining software :


Examples of command line :

  • Nvidia   : ccminer.exe -a x11 -o stratum+tcp://lycheebit.com:3533 -u PGGWn1rz4sby2cLt1yAwhfz6bRuRQoxLiY -p c=PNX
  • AMD      : sgminer.exe --algorithm x11 -o stratum+tcp://lycheebit.com:3533 -u PGGWn1rz4sby2cLt1yAwhfz6bRuRQoxLiY -p c=PNX

Peers list :

    • addnode=[2001:0:9d38:6abd:2c95:138e:2c4d:3788]:31978
    • addnode=[2001:0:9d38:6abd:74:21e9:9a49:b0be]:31978
    • addnode=[2001:0:9d38:6ab8:2804:2ec1:51c0:ffbc]:31978
    • addnode=78.109.28.154:31978
    • addnode=[2001:0:9d38:6ab8:3058:2ed4:bcfc:c51c]:31978
    • addnode=[2001:0:5ef5:79fb:3cbd:3034:b47f:48e6]:31978
    • addnode=[2001:0:9d38:6abd:283a:2cb8:a254:4993]:31978
    • addnode=[2001:0:9d38:6abd:28b7:64:a750:4935]:31978
    • addnode=[2001:0:9d38:78cf:84f:15af:a201:ae78]:31978
    • addnode=[2001:0:9d38:90d7:1858:b6c:ad26:2507]:31978
    • addnode=[2001:0:5ef5:79fb:14d8:3e8f:bdbd:b4f9]:31978
    • addnode=[2001:0:9d38:6abd:2c28:202c:85c5:e497]:31978
    • addnode=[2001:0:9d38:6abd:3431:39f8:5071:525f]:31978
    • addnode=45.77.111.190:9997
    • addnode=[2001:0:4137:9e76:2cb1:15e1:cd9d:f11]:31978
    • addnode=[2001:0:9d38:6abd:803:a20:56ff:8c0e]:31978
    • addnode=[2001:0:9d38:6ab8:46b:b4d:d15b:9ec]:31978
    • addnode=[2001:0:9d38:6abd:20b9:1007:a772:6a5c]:31978
    • addnode=[2001:0:9d38:6abd:2023:fbff:6af9:3cd7]:31978
    • addnode=45.117.168.141:31978
    • addnode=190.102.61.208:31978
    member
    Activity: 81
    Merit: 10
    best pool to mine pnx?

    also a few days back got POS rewards of 50 pnx... is that good? im on the right chain right?
    full member
    Activity: 206
    Merit: 101
    Nothing is True...
    devv reward pos is 50PNX.
    masternode reward is how much 1block?
    Block reward is 50 PNX, 25 to MN, 25 to POS
    legendary
    Activity: 1288
    Merit: 1068
    any setting or requirement for the POS ??

    I only have 100 coins, can I POS?? thanks all
    Yes, any pile of coin can stake. Keep in mind that is takes 3 days for the coin pile to be valid for staking after any transaction. Once is staked - it will add 25 PNX to the pile, possibly split the pile in 2 halves if total is over 100-150PNX and later those new pile(s) should rest for another 3 days before get matured for staking again.

    that means I need hold the 100 coins in my wallet and open my PC and wallet for min. 3 days? right? thanks

    no, staking will start after 3 days coin received. then you need unexpecteble time, it depends your matured balance and network staking balance.
    newbie
    Activity: 83
    Merit: 0
    any setting or requirement for the POS ??

    I only have 100 coins, can I POS?? thanks all
    Yes, any pile of coin can stake. Keep in mind that is takes 3 days for the coin pile to be valid for staking after any transaction. Once is staked - it will add 25 PNX to the pile, possibly split the pile in 2 halves if total is over 100-150PNX and later those new pile(s) should rest for another 3 days before get matured for staking again.

    that means I need hold the 100 coins in my wallet and open my PC and wallet for min. 3 days? right? thanks
    full member
    Activity: 206
    Merit: 101
    Nothing is True...
    any setting or requirement for the POS ??

    I only have 100 coins, can I POS?? thanks all
    Yes, any pile of coin can stake. Keep in mind that is takes 3 days for the coin pile to be valid for staking after any transaction. Once is staked - it will add 25 PNX to the pile, possibly split the pile in 2 halves if total is over 100-150PNX and later those new pile(s) should rest for another 3 days before get matured for staking again.
    newbie
    Activity: 83
    Merit: 0
    any setting or requirement for the POS ??

    I only have 100 coins, can I POS?? thanks all
    member
    Activity: 160
    Merit: 18
    ive been getting low payouts lately too.
    went from 6 to maybe 3.
    only  1 yesterday. debug says everything is fine but idk.
    is there any linux command to make sure the phantom github code was installed correctly?

    would the debug say "masternode started remotely" if there was any problems??
    am i just overthinking it lol

    The total coins turnover is low because CoinsMarket is down.
    Low volume, less necessity to validate on the network
    newbie
    Activity: 11
    Merit: 0
    ive been getting low payouts lately too.
    went from 6 to maybe 3.
    only  1 yesterday. debug says everything is fine but idk.
    is there any linux command to make sure the phantom github code was installed correctly?

    would the debug say "masternode started remotely" if there was any problems??
    am i just overthinking it lol
    legendary
    Activity: 1288
    Merit: 1068
    my node brings me about 5 payments a day. This is normal?

    apprx. 4-6 reward is fine for my nodes. i get max 6 reward per day.
    newbie
    Activity: 29
    Merit: 0
    my node brings me about 5 payments a day. This is normal?
    legendary
    Activity: 1288
    Merit: 1068
    anyone can help me?? I try to send coins from stocks.exchange to the newest wallet, stocks.exchange shown sent but I can see nothing in my wallet, I try to send 3 times, all approved my stocks.exchange and shown me sent, but nothing can see in my wallet, is it wallet problem or stocks.exchange problem? thanks

    I sent some yesterday. Looks like the confirmations for it is pretty high. Mine says Approved, but not sent yet.

    check your wallet address from main explorer. http://explorer.phantomx.co/
    your wallet should be synched forked block, i remembered one of node tracks different blockchain. if you track wrong chain, delete all files on %appdata%/phantomx folder except wallet.dat and resynch your wallet.
    full member
    Activity: 750
    Merit: 100
    anyone can help me?? I try to send coins from stocks.exchange to the newest wallet, stocks.exchange shown sent but I can see nothing in my wallet, I try to send 3 times, all approved my stocks.exchange and shown me sent, but nothing can see in my wallet, is it wallet problem or stocks.exchange problem? thanks

    I sent some yesterday. Looks like the confirmations for it is pretty high. Mine says Approved, but not sent yet.
    newbie
    Activity: 83
    Merit: 0
    anyone can help me?? I try to send coins from stocks.exchange to the newest wallet, stocks.exchange shown sent but I can see nothing in my wallet, I try to send 3 times, all approved my stocks.exchange and shown me sent, but nothing can see in my wallet, is it wallet problem or stocks.exchange problem? thanks
    newbie
    Activity: 11
    Merit: 0
    thank you so much
    i was doing it all wrong...this maybe why ive only been getting 3 or 4 payouts a day.
    i just uploaded the code from github and added the conf file to nano save.
    im sure ill have more questions but i wanna do it properly...
    member
    Activity: 160
    Merit: 18
    so my node has been up and running since dec20th.
    debug node says masternode started remotely. i usually get all payouts,but its been kinda slow lately,only got 2 payouts yesterday.
    so im really just trying to diagnostics test to make sure evrything is up properly.
    one thing ive found is that when i upload the code found on github,at the end i get this.

     cd .. make -f makefile.unix

    is this normal? or is there more that i need to do?
    not the best at linux but learning more and more daily.


    Restart your wallet. We still have problem with CoinsMarket and for that, the volume per day is low.
    If you need help to compile and run your MN, look these steps:

    https://bitcointalk.org/index.php?topic=2251352.320

    Pages:
    Jump to: