Pages:
Author

Topic: [ANN] [Phantomx] coin -> online currency [PNX] | Pow/PoS X11 Masternode - page 27. (Read 52480 times)

newbie
Activity: 8
Merit: 0
I need help this wallet it's compatible with raspberry pi 3?
I compile but I have more errors...
I think can't compile in rb pi 3?
copper member
Activity: 47
Merit: 0
Hi there!

I develop quality of life bots for crypto discord servers. Give me a shout if you are interested

If you don't already have a Discord server, I can assist in creating and administering the Discord server.

Good luck with this project!
jr. member
Activity: 131
Merit: 2
Hi guys.
Im making masternode but got stuck at step 7, click Start and an error showed: could not allocate vin for collateralAddress.
I followed every step as quick step on website.

Quick instructions to start

1) Start the wallet, go to “PhaNtomXNodes” menu item, and you will be presented with all running masternodes.
2) Click on “My PhaNtomXNodes” tab, then click on “Create” button to start creating your masternode.
3) A window will popup. Name your masternode in “Alias” field. In “Address” field type your external address:port
4) Click on button “Copy Address” and send 20000 PNX to that address. Wait 1 conformation then proceed with setup. Collateral address is your own address.
5) Go back to “PhaNtomXNodes” menu, select your PhaNtomX masternode and click button “Get Config”.
6) You must create a file named phantomx.conf. Paste the masternode config you copied before. Go to PhaNtomX folder and place it.
7) Select your PhaNtomX masternode and click button “Start”. Then restart the wallet.

It didnot work for me.  Any idea where I made a mistake?
external address and port I took here: http://www.nirsoft.net/show_my_ip_address.php


unlock the wallet , unselect the staking only option and start the masternode.
thank for your reply.
I did it, the masternode started but nothing on status and active 00:00.
any idea?
Masternode status is not displayed properly in Masternode Tab. You can check status by entering "masternode debug" command from console window.

thank you
I checked on console window and received this message: not capable masternode: Darksend Masternode List doesn't include our masternode, Shutting down masternode pinging service! CTxIn(COutPoint(0000000000, 4294967295), coinbase )
look like my masternode is not working.

Few points:
1. Make sure you still have have 20,000 PNX in your MN address in ONE pile. In "Options" - "Display": enable Display Coin Control Display. Click Send - Inputs and expand your MN address to see 20,000: is it in a ONE pile?
2. Unlock wallet and from debug window type command: "masternode outputs". If you see some outputs - your collateral is good; if nothing output - you collateral is not valid.
3. Make sure your external IP is the same as in your phantomx.conf file; note if you have dynamic IP - it may change over a time.
4. Make sure you have specified valid IP and port, example: 100.99.98.97:31978 (31978 is the recommended port for PNX)
5. Every time you modify conf file - you need to restart wallet
6. Make sure to unlock your wallet before click Start masternode
7. After start, check in console: "masternode debug"
Good luck!

masternode debug and the answear is no problem were found.

thanks a lot Alex Wink

How many coins you get with MN/day?
My wallet is staking only and receive about 600 Phantomx/day that is a lot (have mined 20.000 PNX)
after looking in explorer it says 25 coins each time with staking, but wallet gets 50, little strange istn't it :-)
newbie
Activity: 54
Merit: 0
Hi guys.
Im making masternode but got stuck at step 7, click Start and an error showed: could not allocate vin for collateralAddress.
I followed every step as quick step on website.

Quick instructions to start

1) Start the wallet, go to “PhaNtomXNodes” menu item, and you will be presented with all running masternodes.
2) Click on “My PhaNtomXNodes” tab, then click on “Create” button to start creating your masternode.
3) A window will popup. Name your masternode in “Alias” field. In “Address” field type your external address:port
4) Click on button “Copy Address” and send 20000 PNX to that address. Wait 1 conformation then proceed with setup. Collateral address is your own address.
5) Go back to “PhaNtomXNodes” menu, select your PhaNtomX masternode and click button “Get Config”.
6) You must create a file named phantomx.conf. Paste the masternode config you copied before. Go to PhaNtomX folder and place it.
7) Select your PhaNtomX masternode and click button “Start”. Then restart the wallet.

It didnot work for me.  Any idea where I made a mistake?
external address and port I took here: http://www.nirsoft.net/show_my_ip_address.php


unlock the wallet , unselect the staking only option and start the masternode.
thank for your reply.
I did it, the masternode started but nothing on status and active 00:00.
any idea?
Masternode status is not displayed properly in Masternode Tab. You can check status by entering "masternode debug" command from console window.

thank you
I checked on console window and received this message: not capable masternode: Darksend Masternode List doesn't include our masternode, Shutting down masternode pinging service! CTxIn(COutPoint(0000000000, 4294967295), coinbase )
look like my masternode is not working.

Few points:
1. Make sure you still have have 20,000 PNX in your MN address in ONE pile. In "Options" - "Display": enable Display Coin Control Display. Click Send - Inputs and expand your MN address to see 20,000: is it in a ONE pile?
2. Unlock wallet and from debug window type command: "masternode outputs". If you see some outputs - your collateral is good; if nothing output - you collateral is not valid.
3. Make sure your external IP is the same as in your phantomx.conf file; note if you have dynamic IP - it may change over a time.
4. Make sure you have specified valid IP and port, example: 100.99.98.97:31978 (31978 is the recommended port for PNX)
5. Every time you modify conf file - you need to restart wallet
6. Make sure to unlock your wallet before click Start masternode
7. After start, check in console: "masternode debug"
Good luck!

masternode debug and the answear is no problem were found.

thanks a lot Alex Wink
full member
Activity: 206
Merit: 101
Nothing is True...
Hi guys.
Im making masternode but got stuck at step 7, click Start and an error showed: could not allocate vin for collateralAddress.
I followed every step as quick step on website.

Quick instructions to start

1) Start the wallet, go to “PhaNtomXNodes” menu item, and you will be presented with all running masternodes.
2) Click on “My PhaNtomXNodes” tab, then click on “Create” button to start creating your masternode.
3) A window will popup. Name your masternode in “Alias” field. In “Address” field type your external address:port
4) Click on button “Copy Address” and send 20000 PNX to that address. Wait 1 conformation then proceed with setup. Collateral address is your own address.
5) Go back to “PhaNtomXNodes” menu, select your PhaNtomX masternode and click button “Get Config”.
6) You must create a file named phantomx.conf. Paste the masternode config you copied before. Go to PhaNtomX folder and place it.
7) Select your PhaNtomX masternode and click button “Start”. Then restart the wallet.

It didnot work for me.  Any idea where I made a mistake?
external address and port I took here: http://www.nirsoft.net/show_my_ip_address.php


unlock the wallet , unselect the staking only option and start the masternode.
thank for your reply.
I did it, the masternode started but nothing on status and active 00:00.
any idea?
Masternode status is not displayed properly in Masternode Tab. You can check status by entering "masternode debug" command from console window.

thank you
I checked on console window and received this message: not capable masternode: Darksend Masternode List doesn't include our masternode, Shutting down masternode pinging service! CTxIn(COutPoint(0000000000, 4294967295), coinbase )
look like my masternode is not working.

Few points:
1. Make sure you still have have 20,000 PNX in your MN address in ONE pile. In "Options" - "Display": enable Display Coin Control Display. Click Send - Inputs and expand your MN address to see 20,000: is it in a ONE pile?
2. Unlock wallet and from debug window type command: "masternode outputs". If you see some outputs - your collateral is good; if nothing output - you collateral is not valid.
3. Make sure your external IP is the same as in your phantomx.conf file; note if you have dynamic IP - it may change over a time.
4. Make sure you have specified valid IP and port, example: 100.99.98.97:31978 (31978 is the recommended port for PNX)
5. Every time you modify conf file - you need to restart wallet
6. Make sure to unlock your wallet before click Start masternode
7. After start, check in console: "masternode debug"
Good luck!
jr. member
Activity: 85
Merit: 2
Where is the dev ? Discord is empty !

They are all in Telegram.
newbie
Activity: 54
Merit: 0
Hi guys.
Im making masternode but got stuck at step 7, click Start and an error showed: could not allocate vin for collateralAddress.
I followed every step as quick step on website.

Quick instructions to start

1) Start the wallet, go to “PhaNtomXNodes” menu item, and you will be presented with all running masternodes.
2) Click on “My PhaNtomXNodes” tab, then click on “Create” button to start creating your masternode.
3) A window will popup. Name your masternode in “Alias” field. In “Address” field type your external address:port
4) Click on button “Copy Address” and send 20000 PNX to that address. Wait 1 conformation then proceed with setup. Collateral address is your own address.
5) Go back to “PhaNtomXNodes” menu, select your PhaNtomX masternode and click button “Get Config”.
6) You must create a file named phantomx.conf. Paste the masternode config you copied before. Go to PhaNtomX folder and place it.
7) Select your PhaNtomX masternode and click button “Start”. Then restart the wallet.

It didnot work for me.  Any idea where I made a mistake?
external address and port I took here: http://www.nirsoft.net/show_my_ip_address.php


unlock the wallet , unselect the staking only option and start the masternode.
thank for your reply.
I did it, the masternode started but nothing on status and active 00:00.
any idea?
Masternode status is not displayed properly in Masternode Tab. You can check status by entering "masternode debug" command from console window.

thank you
I checked on console window and received this message: not capable masternode: Darksend Masternode List doesn't include our masternode, Shutting down masternode pinging service! CTxIn(COutPoint(0000000000, 4294967295), coinbase )
look like my masternode is not working.
full member
Activity: 206
Merit: 101
Nothing is True...
I received MN reward payment and seems that it was sent to collateral output, so it stopped MN. Strange thing. Is it possible to lock specific output in wallet?
MN rewards are going to the address with the collateral - no problem. Make sure your collateral are still in 1 pile of coins. Typical mistake is to enable Staking and you collateral may stake and split in 2 piles. This may be the reason why MN stopped

Yes, the pile was split. However, I had `staking=0` in the settings file on MN VPS. Maybe it was a bug in Windows local wallet.
Thanks anyway!
You should put "staking=0" to the Win wallet - this is Win wallet who split your collateral!
I got the same trouble some time ago - unlocked Win wallet just to make a couple transactions and !boom! - MN collateral split in just a minute!
newbie
Activity: 70
Merit: 0
I received MN reward payment and seems that it was sent to collateral output, so it stopped MN. Strange thing. Is it possible to lock specific output in wallet?
MN rewards are going to the address with the collateral - no problem. Make sure your collateral are still in 1 pile of coins. Typical mistake is to enable Staking and you collateral may stake and split in 2 piles. This may be the reason why MN stopped

Yes, the pile was split. However, I had `staking=0` in the settings file on MN VPS. Maybe it was a bug in Windows local wallet.
Thanks anyway!
newbie
Activity: 11
Merit: 0
Where is the dev ? Discord is empty !
full member
Activity: 206
Merit: 101
Nothing is True...
I received MN reward payment and seems that it was sent to collateral output, so it stopped MN. Strange thing. Is it possible to lock specific output in wallet?
MN rewards are going to the address with the collateral - no problem. Make sure your collateral are still in 1 pile of coins. Typical mistake is to enable Staking and you collateral may stake and split in 2 piles. This may be the reason why MN stopped
full member
Activity: 206
Merit: 101
Nothing is True...
Hi guys.
Im making masternode but got stuck at step 7, click Start and an error showed: could not allocate vin for collateralAddress.
I followed every step as quick step on website.

Quick instructions to start

1) Start the wallet, go to “PhaNtomXNodes” menu item, and you will be presented with all running masternodes.
2) Click on “My PhaNtomXNodes” tab, then click on “Create” button to start creating your masternode.
3) A window will popup. Name your masternode in “Alias” field. In “Address” field type your external address:port
4) Click on button “Copy Address” and send 20000 PNX to that address. Wait 1 conformation then proceed with setup. Collateral address is your own address.
5) Go back to “PhaNtomXNodes” menu, select your PhaNtomX masternode and click button “Get Config”.
6) You must create a file named phantomx.conf. Paste the masternode config you copied before. Go to PhaNtomX folder and place it.
7) Select your PhaNtomX masternode and click button “Start”. Then restart the wallet.

It didnot work for me.  Any idea where I made a mistake?
external address and port I took here: http://www.nirsoft.net/show_my_ip_address.php


unlock the wallet , unselect the staking only option and start the masternode.
thank for your reply.
I did it, the masternode started but nothing on status and active 00:00.
any idea?
Masternode status is not displayed properly in Masternode Tab. You can check status by entering "masternode debug" command from console window.
full member
Activity: 206
Merit: 101
Nothing is True...
hi guys

I understand people wanting to mine  I cant at the moment,  Roll Eyes

anyone here think its worth buying some on the exchange ?

just looking for anyones  opinion because of the limited info out there
(excpecting good things in 2018 ?)

anyone please and thank you ! Smiley

Buy when it's cheap Smiley
newbie
Activity: 70
Merit: 0
I received MN reward payment and seems that it was sent to collateral output, so it stopped MN. Strange thing. Is it possible to lock specific output in wallet?
newbie
Activity: 54
Merit: 0
Hi guys.
Im making masternode but got stuck at step 7, click Start and an error showed: could not allocate vin for collateralAddress.
I followed every step as quick step on website.

Quick instructions to start

1) Start the wallet, go to “PhaNtomXNodes” menu item, and you will be presented with all running masternodes.
2) Click on “My PhaNtomXNodes” tab, then click on “Create” button to start creating your masternode.
3) A window will popup. Name your masternode in “Alias” field. In “Address” field type your external address:port
4) Click on button “Copy Address” and send 20000 PNX to that address. Wait 1 conformation then proceed with setup. Collateral address is your own address.
5) Go back to “PhaNtomXNodes” menu, select your PhaNtomX masternode and click button “Get Config”.
6) You must create a file named phantomx.conf. Paste the masternode config you copied before. Go to PhaNtomX folder and place it.
7) Select your PhaNtomX masternode and click button “Start”. Then restart the wallet.

It didnot work for me.  Any idea where I made a mistake?
external address and port I took here: http://www.nirsoft.net/show_my_ip_address.php


unlock the wallet , unselect the staking only option and start the masternode.
thank for your reply.
I did it, the masternode started but nothing on status and active 00:00.
any idea?
newbie
Activity: 32
Merit: 0
hi guys

I understand people wanting to mine  I cant at the moment,  Roll Eyes

anyone here think its worth buying some on the exchange ?

just looking for anyones  opinion because of the limited info out there
(excpecting good things in 2018 ?)

anyone please and thank you ! Smiley
newbie
Activity: 11
Merit: 0
i got my mn up,i think properly, i started receiving payouts pretty quickly. im just having trouble with a few things and was hoping someone could lead me in the right direction.
when my vps shuts down,and comp goes to sleep, my mn time starts over.(it hasnt been up a full 72 so im not sure if thats making it start over or not)

also, is there a command for linux to confirm that your mn is running properly?(i helped with a btdx mn and the command for it was --bitcloudd-- it would come back and say, bitcloud mn started successfully)

and my last question,is about staking rewards. i see alot of warnings before encrypting wallet. i believe i just meed to encrypt wallet to begin staking rewards but i wanted to confirm that thats all i need to do. had a friend encrypt his wallet and when he pulled it back up all coins were gone lol. dont wanna end up in the same boat.
  thanks for the help in advance

wallets stakes fine without encrypting. Receive about 150 coins/day without masternode. So how much coins do you receive when set up MN?
Already mined 20.000 PNX  Roll Eyes

how to get stake without masternode?
I'm still too public for this kind of problem
Staking is simple: just unlock your wallet for staking. If you have enough coins - staking will start automatically - check staking icon in the bottom right of the wallet window.
All coin piles older than 3 days will stake. Staking reward is 25 PNX added to the pile. Coin pile will rest for 3 days after getting staking reward. If your pile is bigger than 200 PNX is will automatically split in 2 equal piles. To be efficient, control your coin piles in 120-170 coins per pile.

thanks guys
been up and running node for 3 days. i think itll start staking soon.
do we need to change config. to staking=1?
full member
Activity: 206
Merit: 101
Nothing is True...
the wallet is not responding for many times, I cannot sync.
don't know what wrong.
hope dev will fix it soon.
Just be patient, leave it running for 15-30 mins, don't kill it after every 5 mins
full member
Activity: 253
Merit: 101
Hi guys.
Im making masternode but got stuck at step 7, click Start and an error showed: could not allocate vin for collateralAddress.
I followed every step as quick step on website.

Quick instructions to start

1) Start the wallet, go to “PhaNtomXNodes” menu item, and you will be presented with all running masternodes.
2) Click on “My PhaNtomXNodes” tab, then click on “Create” button to start creating your masternode.
3) A window will popup. Name your masternode in “Alias” field. In “Address” field type your external address:port
4) Click on button “Copy Address” and send 20000 PNX to that address. Wait 1 conformation then proceed with setup. Collateral address is your own address.
5) Go back to “PhaNtomXNodes” menu, select your PhaNtomX masternode and click button “Get Config”.
6) You must create a file named phantomx.conf. Paste the masternode config you copied before. Go to PhaNtomX folder and place it.
7) Select your PhaNtomX masternode and click button “Start”. Then restart the wallet.

It didnot work for me.  Any idea where I made a mistake?
external address and port I took here: http://www.nirsoft.net/show_my_ip_address.php


unlock the wallet , unselect the staking only option and start the masternode.
newbie
Activity: 54
Merit: 0
Hi guys.
Im making masternode but got stuck at step 7, click Start and an error showed: could not allocate vin for collateralAddress.
I followed every step as quick step on website.

Quick instructions to start

1) Start the wallet, go to “PhaNtomXNodes” menu item, and you will be presented with all running masternodes.
2) Click on “My PhaNtomXNodes” tab, then click on “Create” button to start creating your masternode.
3) A window will popup. Name your masternode in “Alias” field. In “Address” field type your external address:port
4) Click on button “Copy Address” and send 20000 PNX to that address. Wait 1 conformation then proceed with setup. Collateral address is your own address.
5) Go back to “PhaNtomXNodes” menu, select your PhaNtomX masternode and click button “Get Config”.
6) You must create a file named phantomx.conf. Paste the masternode config you copied before. Go to PhaNtomX folder and place it.
7) Select your PhaNtomX masternode and click button “Start”. Then restart the wallet.

It didnot work for me.  Any idea where I made a mistake?
external address and port I took here: http://www.nirsoft.net/show_my_ip_address.php
Pages:
Jump to: