Pages:
Author

Topic: [ANN] [Phantomx] coin -> online currency [PNX] | Pow/PoS X11 Masternode - page 33. (Read 52484 times)

member
Activity: 83
Merit: 10
Today, we will transfer 6,000,000 coins from the premine into one wallet,
which we will post in the topic and it will be burned after the third airdrop to active masternode.
Total coin supply after the burn




Now you can see the road map. The road map includes what has been done, is still being done and will be done in 2018.

https://twitter.com/PhantomX_Coin/status/938421219216494592




Oh, yes.  Tomorrow the first airdrop
jr. member
Activity: 85
Merit: 2
Nobody trades on SE ? I try to sell some of mine for days. Bought weeks ago at first with 100, now went down even to 110 satoshi yesterday and even so, can't sell them back.  Huh

Yeha stocks seems to have no volume for PNX - CM has actually like 0.3 BTC daily. But we need a bigger exchange or something.
member
Activity: 160
Merit: 18
full member
Activity: 441
Merit: 109
Nobody trades on SE ? I try to sell some of mine for days. Bought weeks ago at first with 100, now went down even to 110 satoshi yesterday and even so, can't sell them back.  Huh
newbie
Activity: 54
Merit: 0
my PNX earning from lpool stopped 2 hours ago.
what's going on?
check out my wallet. https://lpool.name/?address=PPnFgZ9XWLTK7c7yc8GW7Mg1SyfFQibET9
sr. member
Activity: 896
Merit: 323
Dear Dev,

This project has lot of potential and it already has its root planted deep which is better than most of the newly emerging coins. But, you seriously need to think about community engagement and marketing.

Your team needs to be active on social media promoting this coin and there should be telegram or discord channel to engage with the community.

This project could have a much brighter future.

I'm agree with you. Other coins like DeepOnion have a bigger community and much more engagement.
We need better marketing and some bounty's for public relations.
full member
Activity: 125
Merit: 100
what happened to the price, seems like coinmarktcap has a bug or something or someone did actually buy it for 900 sats

https://coinmarketcap.com/currencies/phantomx/

Coinsmarket has done trades much higher than 900 sats in this view:

https://coinsmarkets.com/trade-BTC-PNX.htm
full member
Activity: 253
Merit: 101
what happened to the price, seems like coinmarktcap has a bug or something or someone did actually buy it for 900 sats

https://coinmarketcap.com/currencies/phantomx/
full member
Activity: 784
Merit: 100
Guys air drop !!

Guy, I think there will be no airdrop, because if it had been at the beginning of the project, at least his idea is good Smiley
full member
Activity: 125
Merit: 100
to setup a masternode on the bit "enter external address" is that my receiving address for my wallet??

External address is your public-facing IP address for your masternode. This only applies if your MN (say your VPS) is in a cloud and has a DHCP address that isn't the same as its public address.

Fusion
newbie
Activity: 43
Merit: 0
to setup a masternode on the bit "enter external address" is that my receiving address for my wallet??
member
Activity: 160
Merit: 18
Dear Dev,

This project has lot of potential and it already has its root planted deep which is better than most of the newly emerging coins. But, you seriously need to think about community engagement and marketing.

Your team needs to be active on social media promoting this coin and there should be telegram or discord channel to engage with the community.

This project could have a much brighter future.
full member
Activity: 125
Merit: 100

Unfortunately 1: PNX does not have a "lock unspent" function to prevent MN collateral from staking
Unfortunately 2: PNX does not allow to specify different address for MN rewards.
For coins with staking functions both of the above are essential. I hope developers will take a look at this.

As my experience with PNX: I run cold MN on VPS and it is doing staking, however it does not hold MN collateral. Every day from PC with the main wallet I transfer MN rewards from MN address to Staking address.
 

If you set up "reservebalance=xxxxx" or "reservebalance true 99999" in your wallet, the wallet will not stake those amounts as far as I can tell. Still can't start my masternodes though.

Fusion
full member
Activity: 281
Merit: 100
I wonder when airdrop begin 4-15 ?
full member
Activity: 206
Merit: 101
Nothing is True...

Something weird just happened to my MNs.  Up until a few hours ago, they were working.

The hash, for example --

shows up correctly in the block explorer:

http://78.109.28.154:3001/tx/4ed1826d604145e6a68531a49060d5cdb0a1c061e9bb5447b0b866d4b6cca890

However, in my phantomx wallet... shows up as TWO transactions of



So, unsurprisingly my wallet shows no masternode outputs.

Again, working masternodes, nothing changes, boom, wallet thinks its two transactions, even though the block explorer agrees. I'm going to blow away the local block chain and see if that helps.

Also, tried upgrading to the latest phantomx wallet -- no help there.

Any ideas?

remove the staking part in your conf file. set staking=0
there is no locking for the coins for MN with staking


That sounds reasonable. How long after turning off staking before masternode outputs come back? Is it 72 hours -- like the PoS thing is?

Should I move the non MN coins to a separate wallet to stake them?

thanks.


Unfortunately 1: PNX does not have a "lock unspent" function to prevent MN collateral from staking
Unfortunately 2: PNX does not allow to specify different address for MN rewards.
For coins with staking functions both of the above are essential. I hope developers will take a look at this.

As my experience with PNX: I run cold MN on VPS and it is doing staking, however it does not hold MN collateral. Every day from PC with the main wallet I transfer MN rewards from MN address to Staking address.
 

How does your cold MN do staking? Are you saying you run a wallet that stakes on your VPS? While at the same time running an MN on the same VPS?


Yes. First, follow normal process of making cold MN on VPS. Start MN on VPS remotely from your PC wallet with the collateral. Now check the address of VPS wallet or import to VPS wallet privkey of your staking address. Add "staking=1" to the VPS conf file. That's it.
Now daily use your PC to send MN reward to staking address - it will stake.
For safety you can encrypt VPS wallet and unlock it for "staking only". Study help on how to do this.
full member
Activity: 218
Merit: 100
https://deeponion.org
full member
Activity: 125
Merit: 100

Something weird just happened to my MNs.  Up until a few hours ago, they were working.

The hash, for example --

shows up correctly in the block explorer:

http://78.109.28.154:3001/tx/4ed1826d604145e6a68531a49060d5cdb0a1c061e9bb5447b0b866d4b6cca890

However, in my phantomx wallet... shows up as TWO transactions of



So, unsurprisingly my wallet shows no masternode outputs.

Again, working masternodes, nothing changes, boom, wallet thinks its two transactions, even though the block explorer agrees. I'm going to blow away the local block chain and see if that helps.

Also, tried upgrading to the latest phantomx wallet -- no help there.

Any ideas?

remove the staking part in your conf file. set staking=0
there is no locking for the coins for MN with staking


That sounds reasonable. How long after turning off staking before masternode outputs come back? Is it 72 hours -- like the PoS thing is?

Should I move the non MN coins to a separate wallet to stake them?

thanks.


Unfortunately 1: PNX does not have a "lock unspent" function to prevent MN collateral from staking
Unfortunately 2: PNX does not allow to specify different address for MN rewards.
For coins with staking functions both of the above are essential. I hope developers will take a look at this.

As my experience with PNX: I run cold MN on VPS and it is doing staking, however it does not hold MN collateral. Every day from PC with the main wallet I transfer MN rewards from MN address to Staking address.
 

How does your cold MN do staking? Are you saying you run a wallet that stakes on your VPS? While at the same time running an MN on the same VPS?

full member
Activity: 206
Merit: 101
Nothing is True...

Something weird just happened to my MNs.  Up until a few hours ago, they were working.

The hash, for example --

shows up correctly in the block explorer:

http://78.109.28.154:3001/tx/4ed1826d604145e6a68531a49060d5cdb0a1c061e9bb5447b0b866d4b6cca890

However, in my phantomx wallet... shows up as TWO transactions of



So, unsurprisingly my wallet shows no masternode outputs.

Again, working masternodes, nothing changes, boom, wallet thinks its two transactions, even though the block explorer agrees. I'm going to blow away the local block chain and see if that helps.

Also, tried upgrading to the latest phantomx wallet -- no help there.

Any ideas?

remove the staking part in your conf file. set staking=0
there is no locking for the coins for MN with staking


That sounds reasonable. How long after turning off staking before masternode outputs come back? Is it 72 hours -- like the PoS thing is?

Should I move the non MN coins to a separate wallet to stake them?

thanks.


Unfortunately 1: PNX does not have a "lock unspent" function to prevent MN collateral from staking
Unfortunately 2: PNX does not allow to specify different address for MN rewards.
For coins with staking functions both of the above are essential. I hope developers will take a look at this.

As my experience with PNX: I run cold MN on VPS and it is doing staking, however it does not hold MN collateral. Every day from PC with the main wallet I transfer MN rewards from MN address to Staking address.
 
full member
Activity: 125
Merit: 100

Something weird just happened to my MNs.  Up until a few hours ago, they were working.

The hash, for example --

shows up correctly in the block explorer:

http://78.109.28.154:3001/tx/4ed1826d604145e6a68531a49060d5cdb0a1c061e9bb5447b0b866d4b6cca890

However, in my phantomx wallet... shows up as TWO transactions of



So, unsurprisingly my wallet shows no masternode outputs.

Again, working masternodes, nothing changes, boom, wallet thinks its two transactions, even though the block explorer agrees. I'm going to blow away the local block chain and see if that helps.

Also, tried upgrading to the latest phantomx wallet -- no help there.

Any ideas?

remove the staking part in your conf file. set staking=0
there is no locking for the coins for MN with staking


That sounds reasonable. How long after turning off staking before masternode outputs come back? Is it 72 hours -- like the PoS thing is?

Should I move the non MN coins to a separate wallet to stake them?

P.S. I've set staking=0 in my conf file, restarted phantomx after a few hours and it still says I'm staking... Not sure how to unstake this.

thanks.

full member
Activity: 218
Merit: 100
https://deeponion.org
Quote
BOUNTY/AIRDROP
1.  20-27 October       https://bitcointalksearch.org/topic/m.23227141
2.  09-17 November   https://bitcointalksearch.org/topic/m.24242627
3.  04-15 December                                                                                                                                                                                                                                                                                                   

Any details about airdrop here ??
Pages:
Jump to: