Topic: [ANN] Philosopherstone - PHS | No Premine | Mandatory update 1.2Beta3 - page 28. (Read 81178 times)
August 09, 2013, 08:35:40 AM
mine keeps getting stuck at 6084
August 09, 2013, 08:32:49 AM
yeah, thats to much trouble. i want my money back Moray
Hmmm .... It is actually none of my business and I couldn't care less about your LTC's ...BUT ... If he sent you the coins using the correct chain, it is your responsibility to maintain an up-to-date client and not his. He did nothing wrong.
On the other hand, if he is/was on the wrong chain ... then he should send the LTC's back to you.
Just my 0.000005 (worthless) PHS's
there were no problems when he sent them to me two days ago(i was on the new client by the way, i downloaded v1.2.0.0.0 to make the transaction as i had never used PHS prior to the trade. then today when the fork or whatever happened bam, all my 930 phs gone. regardless he has refused to reimburse me my LTC and ignores my private messages which leads me to believe he did this knowingly
What block your client think its at?
-tb-
7564
So there are three chains??
Mine synced and block at 6290. Some reporting syncing with block in the 8000. WTF!
Going to sync one more time with only the config file.
-tb-
August 09, 2013, 08:26:46 AM
All sync'd but it was at 6290, so I Restarted with -rescan and... Est. total blocks is now 8219.
Now I have ~1923 blocks remaining, and it's moving slowly.
Wait... Now it's sync'd.
Or something, I don't know anymore.
Now I have ~1923 blocks remaining, and it's moving slowly.
Wait... Now it's sync'd.
Or something, I don't know anymore.
August 09, 2013, 08:24:19 AM
Hmmm... I'm all synced with most things confirmed, but: "Current number of blocks: 6290"
Im currently stuck here as well, with one4many's node list... 1.2
will wait and c
May be the OP/DEV could bring out another software update which ignores those guys in the network, then at least it would be a proper split everyone would notice ... Just speculating here, not sure if this is possible at all.
August 09, 2013, 08:21:44 AM
yeah, thats to much trouble. i want my money back Moray
Hmmm .... It is actually none of my business and I couldn't care less about your LTC's ...BUT ... If he sent you the coins using the correct chain, it is your responsibility to maintain an up-to-date client and not his. He did nothing wrong.
On the other hand, if he is/was on the wrong chain ... then he should send the LTC's back to you.
Just my 0.000005 (worthless) PHS's
there were no problems when he sent them to me two days ago(i was on the new client by the way, i downloaded v1.2.0.0.0 to make the transaction as i had never used PHS prior to the trade. then today when the fork or whatever happened bam, all my 930 phs gone. regardless he has refused to reimburse me my LTC and ignores my private messages which leads me to believe he did this knowingly
What block your client think its at?
-tb-
7564
August 09, 2013, 08:19:49 AM
Hmmm... I'm all synced with most things confirmed, but: "Current number of blocks: 6290"
Im currently stuck here as well, with one4many's node list... 1.2
will wait and c
August 09, 2013, 08:16:57 AM
Seems like the original nodes in dev post are bad? Im testing ones you posted above, ie
addnode=24.6.21.198
addnode=46.150.89.173
addnode=64.120.17.149
addnode=70.29.193.48
addnode=125.79.142.201
if all is well will post some win files shortly
addnode=24.6.21.198
addnode=46.150.89.173
addnode=64.120.17.149
addnode=70.29.193.48
addnode=125.79.142.201
if all is well will post some win files shortly
August 09, 2013, 08:16:23 AM
Hmmm... I'm all synced with most things confirmed, but: "Current number of blocks: 6290"
August 09, 2013, 08:12:55 AM
I have a windows version, one4many,.. as I posted above, are we on the same chain?
And if so, which files do these guys need
Great ... it looks like we (you and me) are on the same chain ... current block in my client is: 8216 [EDIT: 8217 now]And if so, which files do these guys need
So they need all .dat files from your Philosopherstone data directory ... WITHOUT wallet.dat and peers.dat
All the best!
one4many
August 09, 2013, 08:12:42 AM
yeah, thats to much trouble. i want my money back Moray
Hmmm .... It is actually none of my business and I couldn't care less about your LTC's ...BUT ... If he sent you the coins using the correct chain, it is your responsibility to maintain an up-to-date client and not his. He did nothing wrong.
On the other hand, if he is/was on the wrong chain ... then he should send the LTC's back to you.
Just my 0.000005 (worthless) PHS's
there were no problems when he sent them to me two days ago(i was on the new client by the way, i downloaded v1.2.0.0.0 to make the transaction as i had never used PHS prior to the trade. then today when the fork or whatever happened bam, all my 930 phs gone. regardless he has refused to reimburse me my LTC and ignores my private messages which leads me to believe he did this knowingly
What block your client think its at?
-tb-
August 09, 2013, 08:09:32 AM
FINALLY!
I just dumped everything except the conf with the ONLY the new nodes. It sync'ed after a while. Stopped it, copied back my wallet, and now it's resynced, checking the transactions one by one, slowly. Except a whole bunch of 'Generated but not accepted', so far. I'll rescan when it's done.
I didn't need the new blockchain.
Hopefully this will work for others. It seems like it hangs a few times, so you have to be a little patient.
I just dumped everything except the conf with the ONLY the new nodes. It sync'ed after a while. Stopped it, copied back my wallet, and now it's resynced, checking the transactions one by one, slowly. Except a whole bunch of 'Generated but not accepted', so far. I'll rescan when it's done.
I didn't need the new blockchain.
Hopefully this will work for others. It seems like it hangs a few times, so you have to be a little patient.
August 09, 2013, 08:06:47 AM
I have a windows version, one4many,.. as I posted above, are we on the same chain?
And if so, which files do these guys need
And if so, which files do these guys need
August 09, 2013, 08:03:47 AM
yeah, thats to much trouble. i want my money back Moray
Hmmm .... It is actually none of my business and I couldn't care less about your LTC's ...BUT ... If he sent you the coins using the correct chain, it is your responsibility to maintain an up-to-date client and not his. He did nothing wrong.
On the other hand, if he is/was on the wrong chain ... then he should send the LTC's back to you.
Just my 0.000005 (worthless) PHS's
there were no problems when he sent them to me two days ago(i was on the new client by the way, i downloaded v1.2.0.0.0 to make the transaction as i had never used PHS prior to the trade. then today when the fork or whatever happened bam, all my 930 phs gone. regardless he has refused to reimburse me my LTC and ignores my private messages which leads me to believe he did this knowingly
August 09, 2013, 08:00:45 AM
yeah, thats to much trouble. i want my money back Moray
Hmmm .... It is actually none of my business and I couldn't care less about your LTC's ...BUT ... If he sent you the coins using the correct chain, it is your responsibility to maintain an up-to-date client and not his. He did nothing wrong.
On the other hand, if he is/was on the wrong chain ... then he should send the LTC's back to you.
Just my 0.000005 (worthless) PHS's
August 09, 2013, 08:00:34 AM
so which is the correct fork to be on 
August 09, 2013, 07:56:49 AM
i did what you said and i get a runaway exception error when i run philosopherstone with the new blockchian
Hmmm ... can you post your exception! Thx!Alternatively you can
- delete your philosopherstone data directory (AFTER backing up wallet.dat)
- start the 1.2.0.0 client ... it will immediately stop again with the usual message ...
- create a new philosopherstone.conf file (don't for get the nodes!)
- delete the dat files (except the empty wallet.dat file) and the files in the database directory (NOT the directory itself)
- copy in the files from the zip file
- start philosopherstoned again ... let it catch up with the chain
- stop philosopherstoned
- delete the empty wallet.dat
- copy in your wallet.dat
- start philosopherstoned
YOU SHOULD BE FINE!
one4many
yeah, thats to much trouble. i want my money back Moray
August 09, 2013, 07:55:44 AM
I got the runaway exception too. The db.log said something about it happening copying between environments. Was the blockchain made in Linux, and fails in Windows?
Yes it was made on Linux ... sorry I forgot to mention this.
August 09, 2013, 07:54:02 AM
i did what you said and i get a runaway exception error when i run philosopherstone with the new blockchian
Hmmm ... can you post your exception! Thx!Alternatively you can
- delete your philosopherstone data directory (AFTER backing up wallet.dat)
- start the 1.2.0.0 client ... it will immediately stop again with the usual message ...
- create a new philosopherstone.conf file (don't for get the nodes!)
- delete the dat files (except the empty wallet.dat file) and the files in the database directory (NOT the directory itself)
- copy in the files from the zip file
- start philosopherstoned again ... let it catch up with the chain
- stop philosopherstoned
- delete the empty wallet.dat
- copy in your wallet.dat
- start philosopherstoned
YOU SHOULD BE FINE!
one4many
August 09, 2013, 07:50:48 AM
I got the runaway exception too. The db.log said something about it happening copying between environments. Was the blockchain made in Linux, and fails in Windows?
August 09, 2013, 07:49:28 AM
hmm might be more than 2 or 3 forks... tried to delete everything and re download the chain with 1.2 and has the green check mark back int he 6200s something lol
on the one at 8205 now... 1.2
blocks" : 8205,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 1.09319744,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 39151530,
"pooledtx" : 0,
"testnet" : false
on the one at 8205 now... 1.2
blocks" : 8205,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 1.09319744,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 39151530,
"pooledtx" : 0,
"testnet" : false
Jump to: