Topic: [ANN] [POW] [XHV] Haven Protocol - untraceable payments x stable value storage - page 40. (Read 71459 times)

The AMD card I'm currently using on XHV is a Sapphire Nitro+ 580 8GB.  Bought it used off of ebay, dont know if the guy before me has modded the BIOS, I havent looked at that yet.  Im using "cast_xmr-vega-win64_096" as the miner.  The miner recommends to use the Driver 18.3.4 and to set the Radeon settings to "compute" and then also use the "--forcecompute" argument in the command.   At that point I starting getting more than 800 H/s, it ranges as high at 1100 but Id say averages about 880 most of the time.  Only tweeking on the card I did was that I have MSI Afterburner OC'ing the memory to 2200 (core/ power/ everything else default).  As a side note, getting my system to use the 18.3.4 drivers has been damn tricky because the integrated R7 GPU in this A10 CPU wants 18.2.2 and that older driver kept over-writing the newly installed 18.3.4.  Finally had to just leave the integrated R7 GPU as a "basic microsoft display adapter" so it would stop Fing over the RX580 driver-wise.  I would have disabled the integrated R7 but I like leaving my HDMI cable on the integrated port and off of the card as in some of my rigs Ive noticed leaving an HDMI cable on a mining card periodically drags down your hash output.  Also once I forced that upgrade on the Radeon drivers then I could not open the Radeon settings on that point to switch to compute mode, kept getting an error that versions werent right.  So had to open the registry to force that compute mode.

Im starting to experiment with 2 1080TIs 11GBs.  Seem to get about 2KH/s total for both cards using "xmr-stak  2.4.5" as the miner.  It recommends running several "set GPU" commands right before running the miner and I have let it run for a few hours both running those commands first and then rebooting and doing it again without the commands.  So far for me the resultant hashes is about the same either way.

Hope that helps  

Maybe you did not switch on "compute" mode on the AMD settings.
Anyway here we go:
I have a few Gygabite Gaming RX580 8gb (hynix mem) with modded BIOS and i get from about 850 to 950hs
Settings:
Windows 10
Andreanalin drivers latest version, with "compute" mode on AMD settings
Cast miner
I set the overclocking with OverdriveTool
Gpu:1300,1050
Memory:2200,900
Power -20

I hope this help!


I know that  those who are lucky and have Samsung memory, can get past 1050hs easily....

Can you share your settings for RX 580 ? are 4 or 8gb model ? Here I have 8gb model to test only get 640 h/s

Cheers for the support!

Luckily these guys failed to get any real amount of XHV before they were priced out of the market.

The whole crypto market is down 50 billion in market cap today 

You won't see a balance until you are fully synced. If you are fully synced and still can't see your balance try clearing the cache by heading to settings page and clicking wallet creation height. Make sure its on 0 and then hit save.

lock'em up.  XHV has merit on its own and innovative use of smart contract for real world use case in banking

thank you

When the web wallet be up again? any ETA?

https://steemit.com/cryptocurrency/@cryptomedication/bravadogroup-and-several-other-major-crypto-influencers-caught-planning-massive-pump-and-dump-schemes

thanks. you have a link?

FYI

BravadoGroup and Several Other MAJOR Crypto Influencers Caught Planning Massive Pump And Dump Schemes --------> XHV

in case your wondering about the 21% drop the last 3 hours...

Yep.      And when I downloaded the 2.0.1 wallet and select restore and use the seed phrase from the online wallet....  at that point the windows gui wallet  does then contain the address that my online wallet had BUT balance shows zero despite syncing all day,  and my online balance should not have been zero (cryptoknight shows payments to that address)   

Upcoming token trading 🚀🔥 ERC20 Token Listing application 🚀🔥 http://Ecex.Exchange 🚀🔥

Video: How to apply for token listing on Ecex Exhnange

https://www.youtube.com/watch?v=nNv70UJk1GI

I know what I have to do....
The wallet did not work properly a week before you turned it off. Ten days have passed.
Where is my money?

Web wallet is down?

What GPU/Miner... Threads config/intensity etc...
My coefficient near 0.6 from classic cryptonight

Anyone got goods settings for this i went form 300h/s to 75 on 1 gpu