Still a couple of hours to go until payout time, but early exit polls show a landslide victory to middlecoin and h20 today 
Yeeep this looks realy good, im looking at 0.03/mh so far!!
Topic: [ANN] profit switching auto-exchanging pool - www.middlecoin.com - page 194. (Read 829922 times)
January 21, 2014, 08:44:02 PM
Yeeep this looks realy good, im looking at 0.03/mh so far!!
January 21, 2014, 08:37:10 PM
Still a couple of hours to go until payout time, but early exit polls show a landslide victory to middlecoin and h20 today
January 21, 2014, 07:55:00 PM
Dear fellow middlecoiners, in light of this happy, high-payout day, would you fancy helping out a fellow in need and give me hints on how to get my BAMT setup running? I'm completely lost... Here's my thread: https://bitcointalksearch.org/topic/please-help-me-install-network-drivers-in-bamt-426227
I will reward whoever gets me mining with good ol' hard BTC!
I will reward whoever gets me mining with good ol' hard BTC!
Your best bet might be plugging your BAMT rig via ethernet into a wireless router (http://www.newegg.com/Product/Product.aspx?Item=N82E16833122373). The router will connect to you home wifi and will serve as a bridge for your rig. Very little to none configuration is required. BAMT is a pain to configure with wi-fi, I spent couple days configuring my Edimax adapter even though I am not a Linux newbie.
http://www.amazon.com/gp/product/B002RM08RE/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
# echo 'blacklist rt2800usb' >> /etc/modprobe.d/blacklist.conf
# update-rc.d -f network-manager remove
# apt-get install wicd wicd-curses
# wicd-curses
Tell it to use wifi adapter WLAN0 and enter your encryption type & key and be sure to check the automatically connect check box and bobs yer uncle, you now have wifi on BAMT/SMOS.
January 21, 2014, 07:50:26 PM
Why is the difficulty switching around so fast on the US east server? Are the others doing that?
EU seems to be doing it too, Almost every 30 seconds
January 21, 2014, 07:34:26 PM
H2O u r da man! Thanks bro!!!
January 21, 2014, 07:19:18 PM
Why is the difficulty switching around so fast on the US east server? Are the others doing that?
January 21, 2014, 06:58:49 PM
Thing is, even the ethernet isn't recognised!!
I use the Gigabyte Z77X-UD3H and can't even get connection with that one...
I use the Gigabyte Z77X-UD3H and can't even get connection with that one...
Ah! Here is your solution then :
https://litecointalk.org/index.php?topic=2924.570
"I was able to get BAMT v1.2 working with my Gigabyte GA-Z77X-UD3H with a built-in Atheros network adaptor.
I downloaded the alx drivers from http://www.linuxfoundation.org/collaborate/workgroups/networking/alx
1) Link to driver https://www.kernel.org/pub/linux/kernel/projects/backports/2013/03/04/compat-drivers-2013-03-04-u.tar.bz2
2) Extracted and ran './scripts/driver-select alx'
3) make
4) make install
5) modprobe alx
From that point I was able to see eth0 interface via 'ip link show' command.
Hope that helps some with Atheros chipsets."
That would seem to look quite nice but... I've downloadad the file in windows and copied it to the bamt usb stick but I have no idea where to find it when I'm in bamt browsing all files in the file manager with the linux file system! I know I know I'm a total Linux noob... :-(
Try searching for the file :
sudo su -
find / -name "compat-drivers*"
January 21, 2014, 06:36:34 PM
I got a high reject rate prob too....
didnt solve the prob yet...
but at the moment seem quite good rather last 2 day
http://www.middlecoin.com/reports/1G6Uqo3uUjPAxY71sCEcrRKr68eCLexCV2.html
didnt solve the prob yet...
but at the moment seem quite good rather last 2 day
http://www.middlecoin.com/reports/1G6Uqo3uUjPAxY71sCEcrRKr68eCLexCV2.html
January 21, 2014, 06:35:33 PM
Thing is, even the ethernet isn't recognised!!
I use the Gigabyte Z77X-UD3H and can't even get connection with that one...
I use the Gigabyte Z77X-UD3H and can't even get connection with that one...
Ah! Here is your solution then :
https://litecointalk.org/index.php?topic=2924.570
"I was able to get BAMT v1.2 working with my Gigabyte GA-Z77X-UD3H with a built-in Atheros network adaptor.
I downloaded the alx drivers from http://www.linuxfoundation.org/collaborate/workgroups/networking/alx
1) Link to driver https://www.kernel.org/pub/linux/kernel/projects/backports/2013/03/04/compat-drivers-2013-03-04-u.tar.bz2
2) Extracted and ran './scripts/driver-select alx'
3) make
4) make install
5) modprobe alx
From that point I was able to see eth0 interface via 'ip link show' command.
Hope that helps some with Atheros chipsets."
January 21, 2014, 06:30:10 PM
Anyone else notice we are switching a lot faster? Seems every 30 seconds...
January 21, 2014, 06:22:35 PM
I think I need Atheros or Realtek drivers... Also some dude seems to think Slax doesn't work with multiple Gpus... I'm trying to get six to work!
that would be me, I'm using BAMT v1.2 without any problems.
January 21, 2014, 06:01:33 PM
Dear Middlecoiners,
I hope that you do understand that the DOGE craze will die soon, so please be prepared for the regular payouts and even less. Just don't start posting all the "why are my earnings going down" BS when it happens and enjoy it while it lasts.
In the meantime let LTC diff go down so we can then move there and shake it.
Have pHun
I hope that you do understand that the DOGE craze will die soon, so please be prepared for the regular payouts and even less. Just don't start posting all the "why are my earnings going down" BS when it happens and enjoy it while it lasts.
In the meantime let LTC diff go down so we can then move there and shake it.
Have pHun
January 21, 2014, 05:23:56 PM
To all those who experience high rejects ratio.
Just find out "expiry" in cgminer needs to be set up accosdingly to the delay between miner and the server.
In my case best setting turned out to be "7", not sure if this is just coincidence, but ping to eu. server is 70ms, which means optimal setting is 10% of the ping, sounds weird, I know.
Here are last 1,5h starts after I found out why so many rejects appear
http://imagize[Suspicious link removed]ageshack.us/v2/800x600q90/35/cbk4.jpg
graph stats
http://middlecoin2.s3-website-us-west-2.amazonaws.com/reports/125Fmn2kazyUVNEhabDZtacmB7yReniuWL.html
So I believe you can check ping, divide by 10 round it up and set it as starting point in searching of your best expiry value.
Before I had 15-20% of rejects - 50% of HD7850 value.
In case this helped your earnings and you find my time spent on the investigation was worth it feel free to share some of your extra earnings with me.
BTC -> 125Fmn2kazyUVNEhabDZtacmB7yReniuWL
EDIT
expiry at "8" works even better, so the relation to ping seems only to be coincidence.
Just find out "expiry" in cgminer needs to be set up accosdingly to the delay between miner and the server.
In my case best setting turned out to be "7", not sure if this is just coincidence, but ping to eu. server is 70ms, which means optimal setting is 10% of the ping, sounds weird, I know.
Here are last 1,5h starts after I found out why so many rejects appear
http://imagize[Suspicious link removed]ageshack.us/v2/800x600q90/35/cbk4.jpg
graph stats
http://middlecoin2.s3-website-us-west-2.amazonaws.com/reports/125Fmn2kazyUVNEhabDZtacmB7yReniuWL.html
So I believe you can check ping, divide by 10 round it up and set it as starting point in searching of your best expiry value.
Before I had 15-20% of rejects - 50% of HD7850 value
.In case this helped your earnings and you find my time spent on the investigation was worth it feel free to share some of your extra earnings with me.
BTC -> 125Fmn2kazyUVNEhabDZtacmB7yReniuWL
EDIT
expiry at "8" works even better, so the relation to ping seems only to be coincidence.
January 21, 2014, 04:51:18 PM
Thing is, even the ethernet isn't recognised!!
I use the Gigabyte Z77X-UD3H and can't even get connection with that one...
I use the Gigabyte Z77X-UD3H and can't even get connection with that one...
Yeah. I had the same issues trying to set it up on one of mine too (G1 Sniper 5). There is a problem with this and Gigabyte mobos.
January 21, 2014, 04:50:08 PM
Thing is, even the ethernet isn't recognised!!
I use the Gigabyte Z77X-UD3H and can't even get connection with that one...
I use the Gigabyte Z77X-UD3H and can't even get connection with that one...
Ah! Here is your solution then :
https://litecointalk.org/index.php?topic=2924.570
"I was able to get BAMT v1.2 working with my Gigabyte GA-Z77X-UD3H with a built-in Atheros network adaptor.
I downloaded the alx drivers from http://www.linuxfoundation.org/collaborate/workgroups/networking/alx
1) Link to driver https://www.kernel.org/pub/linux/kernel/projects/backports/2013/03/04/compat-drivers-2013-03-04-u.tar.bz2
2) Extracted and ran './scripts/driver-select alx'
3) make
4) make install
5) modprobe alx
From that point I was able to see eth0 interface via 'ip link show' command.
Hope that helps some with Atheros chipsets."
January 21, 2014, 04:44:44 PM
I think I need Atheros or Realtek drivers... Also some dude seems to think Slax doesn't work with multiple Gpus... I'm trying to get six to work!
I'm using 3 on 2 different rigs (both running 0.1). Just created a new USB stick for 0.2 and will try it tonight when I reboot to change out some riser cables. Don't know about the drivers, but I'm using some cheap a$$ ralink wifi and the drivers were already there.
January 21, 2014, 04:44:23 PM
Thing is, even the ethernet isn't recognised!!
I use the Gigabyte Z77X-UD3H and can't even get connection with that one...
I use the Gigabyte Z77X-UD3H and can't even get connection with that one...
January 21, 2014, 04:34:54 PM
Dear fellow middlecoiners, in light of this happy, high-payout day, would you fancy helping out a fellow in need and give me hints on how to get my BAMT setup running? I'm completely lost... Here's my thread: https://bitcointalksearch.org/topic/please-help-me-install-network-drivers-in-bamt-426227
I will reward whoever gets me mining with good ol' hard BTC!
I will reward whoever gets me mining with good ol' hard BTC!
Your best bet might be plugging your BAMT rig via ethernet into a wireless router (http://www.newegg.com/Product/Product.aspx?Item=N82E16833122373). The router will connect to you home wifi and will serve as a bridge for your rig. Very little to none configuration is required. BAMT is a pain to configure with wi-fi, I spent couple days configuring my Edimax adapter even though I am not a Linux newbie.
January 21, 2014, 04:32:47 PM
I think I need Atheros or Realtek drivers... Also some dude seems to think Slax doesn't work with multiple Gpus... I'm trying to get six to work!
January 21, 2014, 04:06:01 PM
Dear fellow middlecoiners, in light of this happy, high-payout day, would you fancy helping out a fellow in need and give me hints on how to get my BAMT setup running? I'm completely lost... Here's my thread: https://bitcointalksearch.org/topic/please-help-me-install-network-drivers-in-bamt-426227
I will reward whoever gets me mining with good ol' hard BTC!
I will reward whoever gets me mining with good ol' hard BTC!
I am running the Slax miner 0.1 in this thread...
https://bitcointalksearch.org/topic/cryptoslax-linux-mining-distro-389667
Working very well. Looks like they added new wireless drivers for version 0.2. Runs great in RAM from a USB stick.
Jump to: