Anyone know why my SGminer would be closing by itself? Seems like it happen around 15 min then Cg watcher restarts it. Why does it restart? I did change the settings but All I did was remove the Thread -Concurrecny for the last card 290 so let Sgminer pick a default one for it
It has not restarted in 15 minutes, I am monitioring it VIA Team viewer its almost like when I close the Teamview window all the magic happens and it closes by itself.. Hmmm Ghosts in the machine.
Anyway here is the Log For the times it has happened -
Miner.StartMining.DeleteTemporaryBatchFile 'C:\sgminer-4.1.0\temp_MULTIPOOL.bat' deleted successfully.
[16/02/2014 5:15:54 PM] sgminer process closed outside of CGWatcher!
[16/02/2014 5:15:54 PM] [d] Monitor.EnsureMinerRunning found miner stopped; I will wait at least 15 seconds to ensure miner is running...
[16/02/2014 5:15:54 PM] The miner is closed outside of CGWatcher and you've requested for me to ensure it stays running. Attempting to start...
[16/02/2014 5:15:54 PM] [d] Miner.IsProcessAlive(3632) returns False. [First try, test process is nothing. ex: Process with an Id of 3632 is not running.] (CPID0/CMPID=0/CBPID=4912)
[16/02/2014 5:15:54 PM] [d] Miner.StartMining called. [Profile=SGMINER-MIddlecoin;MinerFile=C:\sgminer-4.1.0\MULTIPOOL.bat;MinerFileUsed=C:\sgminer-4.1.0\temp_MULTIPOOL.bat;MinerExecutable=C:\sgminer-4.1.0\sgminer.exe;Config=C:\CGWatcher-1.3.3\temp.conf ();Arguments=/c;Anticipated Port=4028;Used Port=4028;IsBatCmd=True;BatCmdPath=C:\sgminer-4.1.0\temp_MULTIPOOL.bat (C:\sgminer-4.1.0\MULTIPOOL.bat);LastKnownInstanceCount=0/0]
[16/02/2014 5:15:55 PM] [d] BAT successfully launched sgminer executable process using ProcessID 4800.
[16/02/2014 5:15:55 PM] [d] Miner.IsProcessAlive(4800) returns True. [First try, process is alive.] (CPID4800/CMPID=4800/CBPID=4964)
[16/02/2014 5:15:55 PM] [d] Waiting for sgminer to initialize API. Process 4800 alive=True, minerid=4800, bat id=4964.
[16/02/2014 5:15:56 PM] No pools set in config file or arguments! If I need to restart the miner it will be stuck at prompt until you manually enter this information. Putting this into the config file or arguments is highly recommended to ensure continuous mining.
[16/02/2014 5:15:56 PM] [d] Watch for miner, expected process is 4800 (alive).
[16/02/2014 5:15:56 PM] [d] sgminer process is running using ProcessID 4800, expecting port 4028.
[16/02/2014 5:16:02 PM] [d] sgminer running and API initialized on port 4028, process matched to profile SGMINER-MIddlecoin.
[16/02/2014 5:16:02 PM] [d] Finish wait for miner to start, process is 4800 (alive).
[16/02/2014 5:16:02 PM] sgminer started successfully.
[16/02/2014 5:16:02 PM] [d] Miner.StartMining.DeleteTemporaryBatchFile 'C:\sgminer-4.1.0\temp_MULTIPOOL.bat' deleted successfully.
[16/02/2014 5:22:10 PM] [d] Coins data for 60 coin(s) updated from CoinChoose.
[16/02/2014 5:37:10 PM] [d] Web.DownloadData exception: The remote server returned an error: (502) Bad Gateway. The data from
http://www.coinchoose.com/api.php was not downloaded successfully.
[16/02/2014 5:43:31 PM] -- Begin CGWatcher v1.3.5.0 Process -------------------------------------------------------
[16/02/2014 5:43:32 PM] [d] WER DontShowUI value exists (1) and was set to 1 (disabled).
[16/02/2014 5:43:32 PM] Active profile is "SGMINER-MIddlecoin"
[16/02/2014 5:43:33 PM] No CGMiner instance found.
[16/02/2014 5:43:33 PM] Preparing to launch CGMiner in 10 second(s)...
[16/02/2014 5:43:34 PM] Monitoring is turned on at 30 second intervals.
[16/02/2014 5:43:43 PM] You requested I run CGMiner upon starting. Attempting to start using profile "SGMINER-MIddlecoin"...
[16/02/2014 5:43:43 PM] [d] Preparing to autostart miner using (Miner=C:\sgminer-4.1.0\MULTIPOOL.bat; Config=; Arguments=)
[16/02/2014 5:43:43 PM] [d] Miner.StartMining called. [Profile=SGMINER-MIddlecoin;MinerFile=C:\sgminer-4.1.0\MULTIPOOL.bat;MinerFileUsed=C:\sgminer-4.1.0\temp_MULTIPOOL.bat;MinerExecutable=C:\sgminer-4.1.0\sgminer.exe;Config=C:\CGWatcher-1.3.3\temp.conf ();Arguments=/c;Anticipated Port=4028;Used Port=4028;IsBatCmd=True;BatCmdPath=C:\sgminer-4.1.0\temp_MULTIPOOL.bat (C:\sgminer-4.1.0\MULTIPOOL.bat);LastKnownInstanceCount=0/0]
[16/02/2014 5:43:43 PM] [d] BAT successfully launched sgminer executable process using ProcessID 3884.
[16/02/2014 5:43:43 PM] [d] Miner.IsProcessAlive(3884) returns True. [First try, process is alive.] (CPID3884/CMPID=3884/CBPID=3860)
[16/02/2014 5:43:43 PM] [d] Waiting for sgminer to initialize API. Process 3884 alive=True, minerid=3884, bat id=3860.
[16/02/2014 5:43:44 PM] No pools set in config file or arguments! If I need to restart the miner it will be stuck at prompt until you manually enter this information. Putting this into the config file or arguments is highly recommended to ensure continuous mining.
[16/02/2014 5:43:44 PM] [d] Watch for miner, expected process is 3884 (alive).
[16/02/2014 5:43:44 PM] [d] sgminer process is running using ProcessID 3884, expecting port 4028.
[16/02/2014 5:43:50 PM] [d] sgminer running and API initialized on port 4028, process matched to profile SGMINER-MIddlecoin.
[16/02/2014 5:43:50 PM] [d] Finish wait for miner to start, process is 3884 (alive).
[16/02/2014 5:43:50 PM] sgminer started successfully.
[16/02/2014 5:43:50 PM] [d] Miner.StartMining.DeleteTemporaryBatchFile 'C:\sgminer-4.1.0\temp_MULTIPOOL.bat' deleted successfully.
[16/02/2014 5:43:50 PM] sgminer was successfully launched upon startup as you requested.
[16/02/2014 5:44:35 PM] [d] Coins data for 34 coin(s) updated from CoinChoose.