Topic: [ANN] Ravencoin Miner: an optimized open source miner for Ravencoin - page 2. (Read 2041 times)
April 10, 2018, 10:55:23 AM
v2.5 is extremely laggy vs v2.4 on my GTX970. Seems to be same hashrate. Any way of getting it toned down again? Before it was possible to use computer for light browsing while mining.
April 10, 2018, 01:31:08 AM
Great miner, I see a noticeable raise in hashrate. Any suggestions for OC (1070, and 107Tis)?.
Tnx and keep up the good work.
Tnx and keep up the good work.
Awesome glad you like it!!!
Push core as much as you can stable. And leave memory at stock, or even pull it back to save a tiny bit of power/heat. Also I don't recommend 100% power, try 65-85%
April 10, 2018, 01:28:28 AM
Great miner, I see a noticeable raise in hashrate. Any suggestions for OC (1070, and 1070Tis)?.
Tnx and keep up the good work.
Tnx and keep up the good work.
April 10, 2018, 01:27:32 AM
trying it now, seems at least the same speed as enemy , gotta try it on a 1080ti rig yet
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
Hey I am glad you are seeing good initial results!!
It is in the default bat file, "-N 600"
This will use 600 shares to calculate your hash rate shown on the Accepted lines.
You can change 600 to anything you would like.
Higher = more stable hash rate display
Lower = Changes more rapidly.
seems to be at least as fast as the enemy miner but has more features like the daily
profit. Also seems a bit more stable .
I only get 15mhs on my 1080tis , should i try a higwr intensity? mem
is +300 core is +100
You should be able to do any donation you want, however there is a lower limit (12 seconds) to where it will ignore the time period anyways. Lower than .17% (point one seven percent, for clarity haha) It will ignore the donation period anyways because that turns out to be less than 12 seconds.
What intensity are you currently running? and what stratum difficulty?
I'm using default intensity of 20 like it your example, the diffuculty is set by the pool , I have no control of that its set by suprnova
Definitely play around with the intensity. I am seeing interesting results at 19.
Also experiment with different pools. I like ravenminer because it allows you to set stratum difficulty with
-p d=x
suprnova might allow that although I could totally be wrong.
April 10, 2018, 01:24:30 AM
trying it now, seems at least the same speed as enemy , gotta try it on a 1080ti rig yet
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
Hey I am glad you are seeing good initial results!!
It is in the default bat file, "-N 600"
This will use 600 shares to calculate your hash rate shown on the Accepted lines.
You can change 600 to anything you would like.
Higher = more stable hash rate display
Lower = Changes more rapidly.
seems to be at least as fast as the enemy miner but has more features like the daily
profit. Also seems a bit more stable .
I only get 15mhs on my 1080tis , should i try a higwr intensity? mem
is +300 core is +100
You should be able to do any donation you want, however there is a lower limit (12 seconds) to where it will ignore the time period anyways. Lower than .17% (point one seven percent, for clarity haha) It will ignore the donation period anyways because that turns out to be less than 12 seconds.
What intensity are you currently running? and what stratum difficulty?
I'm using default intensity of 20 like it your example, the diffuculty is set by the pool , I have no control of that its set by suprnova
April 10, 2018, 01:20:17 AM
trying it now, seems at least the same speed as enemy , gotta try it on a 1080ti rig yet
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
Hey I am glad you are seeing good initial results!!
It is in the default bat file, "-N 600"
This will use 600 shares to calculate your hash rate shown on the Accepted lines.
You can change 600 to anything you would like.
Higher = more stable hash rate display
Lower = Changes more rapidly.
seems to be at least as fast as the enemy miner but has more features like the daily
profit. Also seems a bit more stable .
I only get 15mhs on my 1080tis , should i try a higwr intensity? mem
is +300 core is +100
You should be able to do any donation you want, however there is a lower limit (12 seconds) to where it will ignore the time period anyways. Lower than .17% (point one seven percent, for clarity haha) It will ignore the donation period anyways because that turns out to be less than 12 seconds.
What intensity are you currently running? and what stratum difficulty?
I'm giving my 13 gpu and 4 gpu rigs a try. Im averaging about 800 rvn a day so i'll do 24 hours and let you know what the results would be....
Keep up the good works!
Awesome man definitely post your results if you can!!
No, if you read my post carefully it says point one seven percent.
Thats 17 parts in 10000
.17%
Not 1.7%
oh i see thanks for clarifying
April 10, 2018, 01:10:58 AM
trying it now, seems at least the same speed as enemy , gotta try it on a 1080ti rig yet
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
Hey I am glad you are seeing good initial results!!
It is in the default bat file, "-N 600"
This will use 600 shares to calculate your hash rate shown on the Accepted lines.
You can change 600 to anything you would like.
Higher = more stable hash rate display
Lower = Changes more rapidly.
seems to be at least as fast as the enemy miner but has more features like the daily
profit. Also seems a bit more stable .
I only get 15mhs on my 1080tis , should i try a higwr intensity? mem
is +300 core is +100
You should be able to do any donation you want, however there is a lower limit (12 seconds) to where it will ignore the time period anyways. Lower than .17% (point one seven percent, for clarity haha) It will ignore the donation period anyways because that turns out to be less than 12 seconds.
What intensity are you currently running? and what stratum difficulty?
I'm giving my 13 gpu and 4 gpu rigs a try. Im averaging about 800 rvn a day so i'll do 24 hours and let you know what the results would be....
Keep up the good works!
Awesome man definitely post your results if you can!!
No, if you read my post carefully it says point one seven percent.
Thats 17 parts in 10000
.17%
Not 1.7%
April 10, 2018, 12:23:06 AM
trying it now, seems at least the same speed as enemy , gotta try it on a 1080ti rig yet
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
Hey I am glad you are seeing good initial results!!
It is in the default bat file, "-N 600"
This will use 600 shares to calculate your hash rate shown on the Accepted lines.
You can change 600 to anything you would like.
Higher = more stable hash rate display
Lower = Changes more rapidly.
seems to be at least as fast as the enemy miner but has more features like the daily
profit. Also seems a bit more stable .
I only get 15mhs on my 1080tis , should i try a higwr intensity? mem
is +300 core is +100
You should be able to do any donation you want, however there is a lower limit (12 seconds) to where it will ignore the time period anyways. Lower than .17% (point one seven percent, for clarity haha) It will ignore the donation period anyways because that turns out to be less than 12 seconds.
What intensity are you currently running? and what stratum difficulty?
I'm giving my 13 gpu and 4 gpu rigs a try. Im averaging about 800 rvn a day so i'll do 24 hours and let you know what the results would be....
Keep up the good works!
Awesome man definitely post your results if you can!!
April 09, 2018, 11:37:46 PM
trying it now, seems at least the same speed as enemy , gotta try it on a 1080ti rig yet
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
Hey I am glad you are seeing good initial results!!
It is in the default bat file, "-N 600"
This will use 600 shares to calculate your hash rate shown on the Accepted lines.
You can change 600 to anything you would like.
Higher = more stable hash rate display
Lower = Changes more rapidly.
seems to be at least as fast as the enemy miner but has more features like the daily
profit. Also seems a bit more stable .
I only get 15mhs on my 1080tis , should i try a higwr intensity? mem
is +300 core is +100
You should be able to do any donation you want, however there is a lower limit (12 seconds) to where it will ignore the time period anyways. Lower than .17% (point one seven percent, for clarity haha) It will ignore the donation period anyways because that turns out to be less than 12 seconds.
What intensity are you currently running? and what stratum difficulty?
I'm giving my 13 gpu and 4 gpu rigs a try. Im averaging about 800 rvn a day so i'll do 24 hours and let you know what the results would be....
Keep up the good works!
Awesome man definitely post your results if you can!!
April 09, 2018, 10:24:36 PM
trying it now, seems at least the same speed as enemy , gotta try it on a 1080ti rig yet
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
Hey I am glad you are seeing good initial results!!
It is in the default bat file, "-N 600"
This will use 600 shares to calculate your hash rate shown on the Accepted lines.
You can change 600 to anything you would like.
Higher = more stable hash rate display
Lower = Changes more rapidly.
seems to be at least as fast as the enemy miner but has more features like the daily
profit. Also seems a bit more stable .
I only get 15mhs on my 1080tis , should i try a higwr intensity? mem
is +300 core is +100
I'm giving my 13 gpu and 4 gpu rigs a try. Im averaging about 800 rvn a day so i'll do 24 hours and let you know what the results would be....
Keep up the good works!
April 09, 2018, 09:25:29 PM
trying it now, seems at least the same speed as enemy , gotta try it on a 1080ti rig yet
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
Hey I am glad you are seeing good initial results!!
It is in the default bat file, "-N 600"
This will use 600 shares to calculate your hash rate shown on the Accepted lines.
You can change 600 to anything you would like.
Higher = more stable hash rate display
Lower = Changes more rapidly.
seems to be at least as fast as the enemy miner but has more features like the daily
profit. Also seems a bit more stable .
I only get 15mhs on my 1080tis , should i try a higwr intensity? mem
is +300 core is +100
April 09, 2018, 09:12:57 PM
What kind of OC is best for this miner on the 1080ti?
On the nevermore miner they advise mem OC is useless and the miner only benefits from the core.
Is it the same for your miner?
On the nevermore miner they advise mem OC is useless and the miner only benefits from the core.
Is it the same for your miner?
Yea memory in general is pretty useless for x16r. As much core as you can get is the best. And you can reduce power % a little.
April 09, 2018, 11:24:51 AM
What kind of OC is best for this miner on the 1080ti?
On the nevermore miner they advise mem OC is useless and the miner only benefits from the core.
Is it the same for your miner?
On the nevermore miner they advise mem OC is useless and the miner only benefits from the core.
Is it the same for your miner?
April 09, 2018, 10:04:20 AM
trying it now, seems at least the same speed as enemy , gotta try it on a 1080ti rig yet
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
Hey I am glad you are seeing good initial results!!
It is in the default bat file, "-N 600"
This will use 600 shares to calculate your hash rate shown on the Accepted lines.
You can change 600 to anything you would like.
Higher = more stable hash rate display
Lower = Changes more rapidly.
April 09, 2018, 05:30:51 AM
trying it now, seems at least the same speed as enemy , gotta try it on a 1080ti rig yet
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
i wish these miners showed average hashrate bc with all the diff algos its hard to figure out whats
faster
April 09, 2018, 05:19:10 AM
Good work, I'll try this today.
April 09, 2018, 03:30:14 AM
verygood
April 09, 2018, 02:10:27 AM
Ravencoin Miner: an optimized open source miner created specifically for Ravencoin.
v2.5
Optimizations all hash functions including:
bmw, jh, blake, groestl, keccak, skein, luffa, cubehash, echo, shavite, simd, fugue, hamsi, shabal, whirlpool, sha
v2.4
Cubehash and Keccak Optimizations
Can color RVN/day line with secondary release Ravencoin Miner v2.4 (COLOR)
Note: See color.txt
v2.3
Fix miner not submitting shares when Hamsi was first Hash function!
6% increase in overall hash rate!
v2.2
Kraww!
Added estimate for RVN earned per day (displays every 5th share)
https://github.com/Ravencoin-Miner/Ravencoin/releases
v2.5
Optimizations all hash functions including:
bmw, jh, blake, groestl, keccak, skein, luffa, cubehash, echo, shavite, simd, fugue, hamsi, shabal, whirlpool, sha
v2.4
Cubehash and Keccak Optimizations
Can color RVN/day line with secondary release Ravencoin Miner v2.4 (COLOR)
Note: See color.txt
v2.3
Fix miner not submitting shares when Hamsi was first Hash function!
6% increase in overall hash rate!
v2.2
Kraww!
Added estimate for RVN earned per day (displays every 5th share)
https://github.com/Ravencoin-Miner/Ravencoin/releases
April 08, 2018, 12:43:54 AM
how do you measure 6% overall rate?
please share comparison and figures.
please share comparison and figures.
Previous to the Hamsi fix, whenever Hamsi was the first hash function in the hash function order, the miner would simply not submit shares. With the fix implemented this is no longer the case. The miner works as normal.
Considering the first hash function can be any of the 16 hash functions, there is a 1/16 or 6.25% chance that Hamsi will be the first hash function in the order. Had that been the case, the miner would not have submitted shares until the next block that didn't start with Hamsi.
This is now fixed in both the v2.3 and v2.4 release which results in an average 6.25% hash rate increase over v2.2.
April 08, 2018, 12:36:23 AM
Displays is not need to show its only slowing hash.
Jump to: