[ANN] [RNS] Renos - A community Based Cryptocurrency - page 17.

AltScope

sr. member

Activity: 714

Merit: 252

Quote from: tobsnn on September 27, 2017, 09:46:40 PM

Quote from: AltScope on September 27, 2017, 05:19:36 PM

Quote from: tobsnn on September 27, 2017, 08:54:54 AM

Quote from: anorganix on September 27, 2017, 08:22:53 AM

Create a new one and send exactly 30K in one transaction to the new collateral.
You should be able to start with the new MN afterwards.

jub ok, I will do so, but this doesn't solve the issue of closing and reopening the wallet and start the MN again, anyway will try my best, thx

i get this error to after resetting my masternode here's what to do if your wallet closes:

open the wallet and open the debug console as normal type masternode start and your passkey
notice the response "remotely started masternode"
immediately type "masternode stop"
start your masternode again
response "succesfully started masternode"

I first posted about this issue months ago but no-one noticed/cared

wow ok, didnt knew that. right now my masternode is back up after a fresh resetup. to avoid this kind of "trouble" wouldn't it be possible to stop the masternode manually (using debug console or gui "stop") before closing the wallet and then be able to start it again after reopening the wallet. someone tried this?

tried previously the bug persists even if you do a clean shutdown but it is how i found the workaround Wink

pay attention to the response if its "remotely started masternode" you've just unlocked your masternode for staking in which case follow the above instructions so far its worked for me without fail after at least 3 reboots

tobsnn

hero member

Activity: 577

Merit: 500

Bitcore BTX

Quote from: verb on September 28, 2017, 02:18:12 AM

Is there a projection as to how the masternode revenue will increase over time, percentage wise? If the number of nodes double, the ROI would be around 5%, and even if the price per RNS would increase dramatically it wouldn't make that much sense to keep 2-3 btc locked up for 5% ROI in these profitable times. If RNS gets on more big exchanges and starts seeing some nice daily volume, would that increase MNs' revenue thru all the network fees?

depends on future rns development/innovations, generating a passive income and helping the network with a masternode. the time more people go full aware of masternode passive income price will adopt.

verb

sr. member

Activity: 432

Merit: 250

Is there a projection as to how the masternode revenue will increase over time, percentage wise? If the number of nodes double, the ROI would be around 5%, and even if the price per RNS would increase dramatically it wouldn't make that much sense to keep 2-3 btc locked up for 5% ROI in these profitable times. If RNS gets on more big exchanges and starts seeing some nice daily volume, would that increase MNs' revenue thru all the network fees?

informed xin

newbie

Activity: 11

Merit: 0

This is great timing to take risk on this project I hope this will go to the moon.

tobsnn

hero member

Activity: 577

Merit: 500

Bitcore BTX

Quote from: AltScope on September 27, 2017, 05:19:36 PM

Quote from: tobsnn on September 27, 2017, 08:54:54 AM

Quote from: anorganix on September 27, 2017, 08:22:53 AM

Create a new one and send exactly 30K in one transaction to the new collateral.
You should be able to start with the new MN afterwards.

jub ok, I will do so, but this doesn't solve the issue of closing and reopening the wallet and start the MN again, anyway will try my best, thx

i get this error to after resetting my masternode here's what to do if your wallet closes:

open the wallet and open the debug console as normal type masternode start and your passkey
notice the response "remotely started masternode"
immediately type "masternode stop"
start your masternode again
response "succesfully started masternode"

I first posted about this issue months ago but no-one noticed/cared

wow ok, didnt knew that. right now my masternode is back up after a fresh resetup. to avoid this kind of "trouble" wouldn't it be possible to stop the masternode manually (using debug console or gui "stop") before closing the wallet and then be able to start it again after reopening the wallet. someone tried this?

AltScope

sr. member

Activity: 714

Merit: 252

Quote from: tobsnn on September 27, 2017, 08:54:54 AM

Quote from: anorganix on September 27, 2017, 08:22:53 AM

Create a new one and send exactly 30K in one transaction to the new collateral.
You should be able to start with the new MN afterwards.

jub ok, I will do so, but this doesn't solve the issue of closing and reopening the wallet and start the MN again, anyway will try my best, thx

i get this error to after resetting my masternode here's what to do if your wallet closes:

open the wallet and open the debug console as normal type masternode start and your passkey
notice the response "remotely started masternode"
immediately type "masternode stop"
start your masternode again
response "succesfully started masternode"

I first posted about this issue months ago but no-one noticed/cared

jooj

sr. member

Activity: 650

Merit: 350

NOBT - WNOBT your saving bank◕◡◕

Quote from: tobsnn on September 27, 2017, 01:39:03 PM

jib, followed them step by step

https://renoscoin.files.wordpress.com/2017/07/renoslocalwalletmasternodesetup_ver1-1.pdf

but couldn't find "lock balance" in coin control

What about Tutorial #2 and/ Or setup a hot/cold wallet as described in this blog post. https://renoscoin.com/tutorial/master-node-setup/

tobsnn

hero member

Activity: 577

Merit: 500

Bitcore BTX

jib, followed them step by step

https://renoscoin.files.wordpress.com/2017/07/renoslocalwalletmasternodesetup_ver1-1.pdf

but couldn't find "lock balance" in coin control

jooj

sr. member

Activity: 650

Merit: 350

NOBT - WNOBT your saving bank◕◡◕

Quote from: tobsnn on September 27, 2017, 12:45:48 PM

is there a possibility to lock 30000 rns for MN over coincontrol?

Did you followed the Masternode tutorials in *.pdf format at https://renoscoin.com/masternodes? by the way there are two Masternode tutorials.

tobsnn

hero member

Activity: 577

Merit: 500

Bitcore BTX

is there a possibility to lock 30000 rns for MN over coincontrol?

tobsnn

hero member

Activity: 577

Merit: 500

Bitcore BTX

Quote from: anorganix on September 27, 2017, 08:22:53 AM

Create a new one and send exactly 30K in one transaction to the new collateral.
You should be able to start with the new MN afterwards.

jub ok, I will do so, but this doesn't solve the issue of closing and reopening the wallet and start the MN again, anyway will try my best, thx

anorganix

copper member

Activity: 970

Merit: 287

Per aspera ad astra

Create a new one and send exactly 30K in one transaction to the new collateral.
You should be able to start with the new MN afterwards.

tobsnn

hero member

Activity: 577

Merit: 500

Bitcore BTX

Quote

You somehow staked and got a reward.
2.1 + 0.9 = 3.

ok, but unfortunately I'm now not able to start the masternode anymore

anorganix

copper member

Activity: 970

Merit: 287

Per aspera ad astra

You somehow staked and got a reward.
2.1 + 0.9 = 3.

tobsnn

hero member

Activity: 577

Merit: 500

Bitcore BTX

Quote from: Fleshwounded on September 26, 2017, 11:31:19 PM

Try unlocking your wallet... then start the node up... It will work

Quote from: tobsnn on September 26, 2017, 06:40:58 PM

hey folks, today was the first day I closed and reopened my wallet since masternode setup, the IP is still the same but even after 50 confirmations I am getting "my IP: ERROR: could not allocate vin for collateralAddress"

not quite sure how to reenter the masternode network after closing and reopening the wallet Huh

do I have to wait 6 hours for min stake age to get back on the MN list to stake?

thx, but of course wallet is unlocked since I started the wallet, now after 10 hours still not able to start the MN

this is what my coincontrol looks like

when the masternode was running the first time I had exactly 30000 in it, now 0.90 more, maybe this is the reason. Because I still receiving the error below

not quite sure whats wrong, here's the dashboard with the mysterious 0.9 (going directly into MN address?)

any help is very appreciated

the-doctor

full member

Activity: 542

Merit: 101

This is one of the most genuine, masternodes project IMO, I bought masternode and I support the development.

verb

sr. member

Activity: 432

Merit: 250

Read on twitter that a trading bot is due to launch, similar to the now defunct QTL trader. This is once more good news and a sign of an active community and devs. Price is unbelievably low. MN rewards are pretty low at the moment, hope this will change for the better in the future, once the network takes off

tu0666047zish

jr. member

Activity: 56

Merit: 10

This is great timing to take risk on this project I hope this will go to the moon.

cuddlefish

sr. member

Activity: 364

Merit: 250

Any news regarding developing this coin?
Seems price can't up like several months ago
Hold some renos hope that the price will going up

Fleshwounded

newbie

Activity: 29

Merit: 0

Try unlocking your wallet... then start the node up... It will work

Quote from: tobsnn on September 26, 2017, 06:40:58 PM

hey folks, today was the first day I closed and reopened my wallet since masternode setup, the IP is still the same but even after 50 confirmations I am getting "my IP: ERROR: could not allocate vin for collateralAddress"

not quite sure how to reenter the masternode network after closing and reopening the wallet Huh

do I have to wait 6 hours for min stake age to get back on the MN list to stake?

Topic: [ANN] [RNS] Renos - A community Based Cryptocurrency - page 17. (Read 131703 times)