[ANN] Sfards:SF100, the first 28nm Dual-Mode Miner is accepting pre-order now - page 60.

vs3

hero member

Activity: 622

Merit: 500

Quote from: Bicknellski on May 05, 2015, 12:58:40 AM

so they could as (everyone else so far) have done before price it to what the market will bare not what it best to make ROI for a home miner a small farm.

yup - that's how pricing usually works. It's always the maximum that the market can bear (which sometimes happens to be the maximum considering the competition).

Bicknellski

hero member

Activity: 924

Merit: 1000

Serious stuff for serious developers.

Nice to see hardware for people that develop.

In terms of price I don't think for a development board that is prohibitive for a serious developer.

How the pricing of this offer somehow determines miner price is hard to determine as it really depends on where you have your final unit built and the volume of your run. It is worrying that this is the only such offering currently available for the foreseeable future so they could as avalon, asicminer, hashfast, bitmine, black arrow, bitmain or bitfury or spondoolies have done before price it to what the market will bear (thanks vs3) not what is best to make ROI for a home miner a small farm.

Quote from: Sfards on May 04, 2015, 04:57:05 AM

SFARDS’ SF3301 sample chip is available on May 4th

SFARDS is now selling a few SF3301 development boards and sample chips to developers who wish to customize and build their own hardware.

Sales Information:

Sample chip: 200 USD per pack, include two chips (exclude shipping)
Development board set: 400 USD (exclude shipping)
Shipping info: Within 48 hours after full payment (Payment by Bitcoin or USD)

For more questions such as place order or large scale orders, please email [email protected] or add our skype:sfardsservice.

Features:

Sample chip:
More details about SF3301 chips, please kindly find the datasheet.
https://github.com/sfards

Development board set (includes one dev board, two power supply boards, radiator and fan):
Main Board
SF3301 : 1 chip
Heatsink : heatsink & 12mmx12mm fan
FBB Voltage : +/- 0~1.0V
Communication Interface : RS232 / TTL

Power Supply Board:
Output Voltage Range : 0.5~1.6V
Voltage Step:6.25mV
Max Current : 120A

toptekk

member

Activity: 112

Merit: 10

That worry's me to. why sell the a sample chip for so much the miner maybe 1000 or better without shipping . well see .

Quote from: pekatete on May 04, 2015, 09:43:01 AM

I am thinking the price of the sample chips reflects, to an extent, the final retail price of chips to future buyers. That, though, would rule out making any market-worthy miner. So sfards, is this sample chip pricing only effective until you release your own rigs, or (assuming there are no further improvements in chip tech) is this the real price we'd also have expect after you release your own rigs?

Meech

hero member

Activity: 924

Merit: 1000

Nice find! That's more informative then these last pages of Huh

?. Speculative, yes, but has me a lil excited to see the prices in 1 month.

TheRealSteve

hero member

Activity: 686

Merit: 500

FUN > ROI

There's a bit more info + pictures in Bitcoin Magazine's feature: New Mining Chip Developed by SFARDS Becomes Most Efficient Chip Produced
( Presuming it's an implementation of the reference schematic, which looks likely, components are effectively listed there. )

starsoccer9

legendary

Activity: 1630

Merit: 1000

hmm added you guys on skype, but havent heard a word yet.

J4bberwock

hero member

Activity: 840

Merit: 1000

The power boards are probably based on something like tps40140 or ltc3829.
They could have been ordered separately. worst case, they can be used to work on other chips later.
But I expected the power supply to be built in the dev board, and price for the dev board is almost twice what I expected, so sample chips will be fine and more fun.

Anyway, my 2 chips design only needs routing to be finished.
I've been away today and will be driving back home tomorrow (9hours trip at least), so I probably won't update until Wednesday.

Sample chips price is a little bit high too, I expected something closer to 50$ each, but if price for "small batches" is right, it doesn't really matters.
Before I buy 2 or 4 of them, I'll need some more technical informations than what can be found in the partial data sheet.
I'll check tomorrow or Wednesday for what's missing.
Can I assume the chips will be sent express (dhl/FedEx) within 1 or 2 days after payment will be made?

Meech

hero member

Activity: 924

Merit: 1000

Quote from: philipma1957 on May 04, 2015, 10:59:37 AM

Okay here we go I will not and can not develop a miner from that kit. I am fine with that.

Now for developers, here is the only: question do they want to spend 400 to make a design without knowing chip prices?

That is up to them. Does it encourage a lot of developers no it does not, but how many groups can take the kit and make a miner from it 20?

I have been on this site for years. As I see it right now maybe 20 to 30 could take the kit and make something of it.

Should they pay 400 that is up to those that know they can build something from it. They also need belive that they will get more chip when they need them at a fair price.

I am still waiting for a plug n play on this and it still looks to be too little too late.

Seems a reasonable expense for those qualified to do so especially if they receive them a month before Sfards first product ships.

TheRealSteve

hero member

Activity: 686

Merit: 500

FUN > ROI

Quote from: dogie on May 04, 2015, 09:29:58 AM

Hard to tell but looks to be about that of Blackarrow's chip, so we know that they could get at least 100W out of it. But yeah smaller than I expected.

Not that hard to tell - the chip silicon and substrate sizes are in the datasheet after all. SF3301 substrate is 19x19mm. Minion is 25x25mm - a fair bit larger, while KnC's public offerings were a massive 55x55mm.
It should be the same size as Spondoolies-Tech's RockerBox, which you're familiar with.
( A bunch of this data is in the wiki )

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Okay here we go I will not and can not develop a miner from that kit. I am fine with that.

Now for developers, here is the only: question do they want to spend 400 to make a design without knowing chip prices?

That is up to them. Does it encourage a lot of developers no it does not, but how many groups can take the kit and make a miner from it 20?

I have been on this site for years. As I see it right now maybe 20 to 30 could take the kit and make something of it.

Should they pay 400 that is up to those that know they can build something from it. They also need belive that they will get more chip when they need them at a fair price.

I am still waiting for a plug n play on this and it still looks to be too little too late.

pekatete

hero member

Activity: 518

Merit: 500

I am thinking the price of the sample chips reflects, to an extent, the final retail price of chips to future buyers. That, though, would rule out making any market-worthy miner. So sfards, is this sample chip pricing only effective until you release your own rigs, or (assuming there are no further improvements in chip tech) is this the real price we'd also have expect after you release your own rigs?

Quote from: dogie on May 04, 2015, 09:29:58 AM

The point of the pricing is that only those who will actually do something useful with them will buy them. Yes its high, but yes supply is extremely limited.

Waffle! What does it cost them if they sold the sample chips at a fair price and they are not put to good use? In any case, what is good use ...? And by the way, sfards is not bitmain where you get the privellege of taking pretty pictures of their rigs accompanied by waffle.

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: adaseb on May 04, 2015, 05:59:08 AM

WOW! That chip is pretty small, I assumed it would be the same size as KNCMiners or SP ASIC chips.

Hard to tell but looks to be about that of Blackarrow's chip, so we know that they could get at least 100W out of it. But yeah smaller than I expected.

Quote from: Dexter770221 on May 04, 2015, 06:40:33 AM

Quote from: dogie on May 04, 2015, 05:12:15 AM

Hurrah. Appropriate pricing on the development boards as well, good job.

Those are almost always quiet expensive. But price of sample chips is ridicolous. It will scare developers. In this industry (chips production) sample chips are very often given for free. They just want to charge 10 times of their price. If chip has so high price miner can't be cheap, simple logic. SFARDS is shooting to their own foot,or they just don't care and want to mine for themselfs. Then, why all this hassle with dev board and sample chips? I'm so confused...

The point of the pricing is that only those who will actually do something useful with them will buy them. Yes its high, but yes supply is extremely limited.

ashleysly

full member

Activity: 225

Merit: 100

Now all we need is "How to build Minter with SF3301 Chip, for dummies"

notlist3d

legendary

Activity: 1456

Merit: 1000

Very nice looking dev kit! Very impressive. Cant wait to see some people put it though it's paces.

Dexter770221

legendary

Activity: 1029

Merit: 1000

Quote from: dogie on May 04, 2015, 05:12:15 AM

Hurrah. Appropriate pricing on the development boards as well, good job.

Those are almost always quiet expensive. But price of sample chips is ridicolous. It will scare developers. In this industry (chips production) sample chips are very often given for free. They just want to charge 10 times of their price. If chip has so high price miner can't be cheap, simple logic. SFARDS is shooting to their own foot,or they just don't care and want to mine for themselfs. Then, why all this hassle with dev board and sample chips? I'm so confused...

adaseb

legendary

Activity: 3808

Merit: 1723

WOW! That chip is pretty small, I assumed it would be the same size as KNCMiners or SP ASIC chips.

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Hurrah. Appropriate pricing on the development boards as well, good job.

Sfards

newbie

Activity: 51

Merit: 0

SFARDS’ SF3301 sample chip is available on May 4th

SFARDS is now selling a few SF3301 development boards and sample chips to developers who wish to customize and build their own hardware.

http://i59.tinypic.com/xkyt4z.jpg

http://i57.tinypic.com/1693m7o.jpg

Sales Information:

Sample chip: 200 USD per pack, include two chips (exclude shipping)
Development board set: 400 USD (exclude shipping)
Shipping info: Within 48 hours after full payment (Payment by Bitcoin or USD)

For more questions such as place order or large scale orders, please email [email protected] or add our skype:sfardsservice.

Features:

Sample chip:
More details about SF3301 chips, please kindly find the datasheet.
https://github.com/sfards

Development board set (includes one dev board, two power supply boards, radiator and fan):
Main Board
SF3301 : 1 chip
Heatsink : heatsink & 12mmx12mm fan
FBB Voltage : +/- 0~1.0V
Communication Interface : RS232 / TTL

Power Supply Board:
Output Voltage Range : 0.5~1.6V
Voltage Step:6.25mV
Max Current : 120A

HyperMega

full member

Activity: 129

Merit: 100

Quote from: brontosaurus on May 03, 2015, 03:31:18 AM

I have to admit that I missed that, my estimate of the size of the chip is 12.5 -13.2 mm on a side, equating to a packaged device
cost (in volumes of 2 million pa) of $11.4. With the actual dies size of 10.5 mm on a side, that price comes down to $9.1, saving
$37 per 16 chip system. That does make a difference.

$9.1 production costs per packaged chip?

Assuming 90% yield they should have about 560 yielding dies per 28FDSOI wafer. The flip-chip substrate and assembly is most likely not below $1 per chip. Under this assumptions your price estimation would translate in a wafer price of less than $4500.
One gets maybe such prices if you talk with foundries about revenues in the range of 1 billion US$ but not for a "tiny" Bitcoin deal.

I would speculate that their chip production costs (including packaging) are more in the range of $15 and they can't sell below $20, because as you said they also have to get their NRE back. If they have yield issues the price could be even much higher. But we will see.

Overall I agree with your conclusion, this chip will be simply to expensive to be a game changer.

J4bberwock

hero member

Activity: 840

Merit: 1000

Quote from: BitcoinPappi on May 02, 2015, 11:00:30 AM

Quote from: J4bberwock on May 01, 2015, 05:00:57 PM

Quote from: Dexter770221 on May 01, 2015, 04:05:19 PM

Quote from: ?? on ??

.....
Really neat, but we still don't know if this is at the wall yet?

It's a chip datasheet. "At wall" depends on many factors. DC/DC converter and PSU efficiency. So, if thats not specified all data covers only chip.

up to 25% extra power draw is to be expected at the wall with a gold rated PSU, depending on the design:
10-12% for the PSU, and 10-15% for the power converter that will drop your +12v to 0.6-0.9v

When using string design, you'll save almost all the loss from the power converter.
That's what you can expect from the "24 chips design" they announced at the same time as the 1 chip design.
I still believe that 18-20 chips would be a better choice if they go the string design route.

If some of you are interested in kicad footprint and library for the SF3301/GC3328 chip, I finished mine a few minutes ago.
I'll double check everything tomorrow and share with those interested.

Could you create a Github repo or DropBox folder to share your work ? Do you plan on making your designs available to the community ?

Here is a dropbox link with the Kicad footprint and library.

https://www.dropbox.com/sh/cjjkrq1fv2u7m0l/AADU4n7cCJsl5N1E6Qtai5M5a?dl=0

First trial at dropbox, so I'm not 100% sure it'll work

My schematics for a 2 chips board will probably be public.
I still need to create a few components to finish it.

Summary:
BTC side:
6 phases buck controller for 200+ amps available
Voltage selectable with dip switches from 0.50 to 0.81v (can be unlocked to 1.21v)
LTC side:
Same power circuit, but with 2-3 phases used
Communication interface:
USB communication with CP2105/2108

I also kept the ability to daisy-chain boards like in the reference design and a more simple adjustable body bias circuit from +/-0.5v to +/-1.1v

Topic: [ANN] Sfards:SF100, the first 28nm Dual-Mode Miner is accepting pre-order now - page 60. (Read 129811 times)