After weeks of hard work along with other devs and blockchain experts we finally can release SK21 , the skull evolution coin, we aimn't to have another coin, we aim to do the best with our skull coin and we've decided for masternodes. So we offer the same premined amount of skull circulating in swap 1:1 ratio to our users and new comers.
Coin Specs:
ALGO:XEVAN
Dark Gravity wave retarget
250k Collateral
Pow-Pos
Pow
Block time 300 sec
Reward 80 coins x blockk + 20% masternode
Final POW block 100000
Premine for swap 30000000
Ports rpc: 72013 p2p: 25070
Pos
- 10% Pos reward roughly every 40k blocks
+ %90 to pos and MN
Other features:
Instant-tx
Darksend
Obfuscation:coinjoin
Masternode set up 250k coins
How to set up a masternode tutorial
WELCOME TO Brazilman37BTC's MASTERNODE SETUP GUIDE!
Hi,
welcome. I have found Masternode ownership to be a very rewarding experience, teaching me about computers and different operating systems, as well as making me extra money that would just be sitting in my wallet anyway!
BEFORE YOU BEGIN, YOU WILL NEED:
- 250,000 Skull (SK21)
- The latest Skull (SK21) wallet, which can always be found here: https://goo.gl/HH3oZE
- wallet must be installed and synced and coin must be available for use. (not pending)
- An ability to follow instructions to the letter.
- If you dont have a clue as to how to modify or create a .conf file? Well, my friend your in the wrong place. This tutorial is for informational purposes only.
- If you follow instructions you will have a succesfully created masternode.
- Good luck and have a nice day!!!
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LET'S GET STARTED!
First, you will need to make sure your wallet is backed up and unlocked to support the Masternode setup.
Please bear in mind the following safety tips:
- Always do a backup of your WALLET.DAT if you have Skull (SK21) on your computer.
- Think twice before deleting or overwriting anything, as there is no way back...Post here for help.
- Never copy WALLET.DAT when your wallet is running! Please use the BACKUP WALLET command from within your wallet instead.
Ok now your ready to get down to business......
Next step is to go to the tools tab in upper left corner, then once that window pops down look for debug console. That will open a second window, it is your debug window where you can enter commands for your wallet.
- In the debug window on the command line you will want to type this command "masternode genkey" without the quotes of course. Done so far? Very good, now the next step is to enter another command in the same line, dont worry you will have use for the info that the last command produced.
- Ok next step: in the command line type the following "getaccountaddress MyMasternode" again without quotes. that produces another result in the window. Next step: you want to close out the debug window for now.
- Now, you have the main wallet window, click the send tab to go to the area to send coins. Next: send exactly 250,000 Skull (SK21) coins the address you generated in the debug window (that part is really not tough, just double click to highlight then copy and paste that to the send address in the send tab.
- Next step: reopen the debug window again. In the command line enter the following command "masternode outputs" and then you will want to leave that open for now.
- Next step: you should know how to find the masternode.conf file thats been included with this coins setup files. As implied ealier in this tutorial, if you dont have a clue as to how you can find that file? Maybe you shouldnt be doing this. If in doubt stop right here and open another browser window do some reasearch on how to do that.
- Next step: your going to want to right click that file and edit it. that will open the notepad and allow you to start editing the file.
- Next step: ok you will see the first couple lines are only for instructional use. the last line is what you want to use. You need to replace that ip address with your own (you should know how to do this already) if not there is info in forums showing how.
- Next step: ok so basically all you replace is the alias for example i named my masternode mn1 , then replace ip and leave the :25070, then you replace the next set of chars (883uXHwWXgkb7zvSF1SzdKDgtahXbSpGSgiMqqZr57MMDS61X1u) with the masternodeprivkey you generated in the debug window. and please indlude the spaces as seen in example or will not work.
- Next step: next you replace the next set of chars (cb94f8538298dfc6503c3241933da301be8ebeb8969e6afb331d47b7901a24b9) with the collateral_output_txid
- Next step: you have the final value which in example is 0 and you will replace as same.
- Next step: now you close the debug window.
- Next step: backup the wallet.dat file
- Next step: shut down the wallet and restart it.
- Next step: it may give you the message of block error, then it may also ask if you would like to reload the block info or smoething like that. click yes and it will be fast.
- Next step: once youve done that open the masternode window and you should see your newly created masternode. If you see it and see it says missing? Don't worry just click at lower left bottom start masternode. Then after a minute you can look up and see the statuus of the masternode is now enabled.
Congratulations!!!!!!
You have successfully created the SK21 masternode.
Written by Brazilman37BTC
if not using wallet for masternode use node for normal wallet.
Imediate Roadmap
-Premining and Mainnet test
-Masternode mainet test
-Mining Pools
-Swap with old skull coins (not mandatory) Exchange is compiling now
-Specific information and guide to set masternode dark send mix and other coin features
-WebSite and Media
-Masternodes for dummies
-Strong crypto exchanges
-Games development
New Twitter page here:
https://twitter.com/Sk21Coin
1st AID & Early Swap at our Slack
https://join.slack.com/t/pirateblocks/shared_invite/MjIzMTAxNjExMTczLTE1MDIwODgyNzItMTFjMWU0ZTc1Ng
DOWNLOAD
to apply for airdrop :
(only 50 p)
-download wallet and get address
-tweet: '' new $sk21 skull evolution is live, masternodes-mix-dark send-airdrop https://bitcointalk.org/index.php?topic=2176430.new#new''
attaching a logo picture to the tweet
-retweet : https://twitter.com/Sk21Coin/status/908391073013227526
-Post a support comment at https://bitcoingarden.org/forum/index.php?topic=19259.msg195684#msg195684 about our coin
(a comment, not three words or repite other posts)
this 4 task will receive a reward of 10$ worth sk-21 that will be paid as the airdrop 50 people registered post their proofs only in reply to this thread and quoting this message
to swap your coins:
option a: send skull to PAZA6DMFyfGakrs3fKhXQS7UgMPjYhkP3h with attached following info:
-amount sent & txid
-sk21 address to receive your sk21
option b: wait nova to compile and change your coins at nova
THERE ARE NO BONUSES AND SWAP RATIO IS ALWAYS 1-1
SWAPPED SKULL WILL BE BURNT AFTER A SECURITY PERIOD OF 15 DAYS AFTER THE SWAP NOT BE REFUNDABLE
ONLY CAN RESTORE SWAPPED SKULL IN CASE OF SK21 FAILURE
YOU CAN MINE NOW FROM YOUR WALLET
Coin Specs:
ALGO:XEVAN
Dark Gravity wave retarget
250k Collateral
Pow-Pos
Pow
Block time 300 sec
Reward 80 coins x blockk + 20% masternode
Final POW block 100000
Premine for swap 30000000
Ports rpc: 72013 p2p: 25070
Pos
- 10% Pos reward roughly every 40k blocks
+ %90 to pos and MN
Other features:
Instant-tx
Darksend
Obfuscation:coinjoin
Masternode set up 250k coins
How to set up a masternode tutorial
WELCOME TO Brazilman37BTC's MASTERNODE SETUP GUIDE!
Hi,
welcome. I have found Masternode ownership to be a very rewarding experience, teaching me about computers and different operating systems, as well as making me extra money that would just be sitting in my wallet anyway!
BEFORE YOU BEGIN, YOU WILL NEED:
- 250,000 Skull (SK21)
- The latest Skull (SK21) wallet, which can always be found here: https://goo.gl/HH3oZE
- wallet must be installed and synced and coin must be available for use. (not pending)
- An ability to follow instructions to the letter.
- If you dont have a clue as to how to modify or create a .conf file? Well, my friend your in the wrong place. This tutorial is for informational purposes only.
- If you follow instructions you will have a succesfully created masternode.
- Good luck and have a nice day!!!
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LET'S GET STARTED!
First, you will need to make sure your wallet is backed up and unlocked to support the Masternode setup.
Please bear in mind the following safety tips:
- Always do a backup of your WALLET.DAT if you have Skull (SK21) on your computer.
- Think twice before deleting or overwriting anything, as there is no way back...Post here for help.
- Never copy WALLET.DAT when your wallet is running! Please use the BACKUP WALLET command from within your wallet instead.
Ok now your ready to get down to business......
Next step is to go to the tools tab in upper left corner, then once that window pops down look for debug console. That will open a second window, it is your debug window where you can enter commands for your wallet.
- In the debug window on the command line you will want to type this command "masternode genkey" without the quotes of course. Done so far? Very good, now the next step is to enter another command in the same line, dont worry you will have use for the info that the last command produced.
- Ok next step: in the command line type the following "getaccountaddress MyMasternode" again without quotes. that produces another result in the window. Next step: you want to close out the debug window for now.
- Now, you have the main wallet window, click the send tab to go to the area to send coins. Next: send exactly 250,000 Skull (SK21) coins the address you generated in the debug window (that part is really not tough, just double click to highlight then copy and paste that to the send address in the send tab.
- Next step: reopen the debug window again. In the command line enter the following command "masternode outputs" and then you will want to leave that open for now.
- Next step: you should know how to find the masternode.conf file thats been included with this coins setup files. As implied ealier in this tutorial, if you dont have a clue as to how you can find that file? Maybe you shouldnt be doing this. If in doubt stop right here and open another browser window do some reasearch on how to do that.
- Next step: your going to want to right click that file and edit it. that will open the notepad and allow you to start editing the file.
- Next step: ok you will see the first couple lines are only for instructional use. the last line is what you want to use. You need to replace that ip address with your own (you should know how to do this already) if not there is info in forums showing how.
- Next step: ok so basically all you replace is the alias for example i named my masternode mn1 , then replace ip and leave the :25070, then you replace the next set of chars (883uXHwWXgkb7zvSF1SzdKDgtahXbSpGSgiMqqZr57MMDS61X1u) with the masternodeprivkey you generated in the debug window. and please indlude the spaces as seen in example or will not work.
- Next step: next you replace the next set of chars (cb94f8538298dfc6503c3241933da301be8ebeb8969e6afb331d47b7901a24b9) with the collateral_output_txid
- Next step: you have the final value which in example is 0 and you will replace as same.
- Next step: now you close the debug window.
- Next step: backup the wallet.dat file
- Next step: shut down the wallet and restart it.
- Next step: it may give you the message of block error, then it may also ask if you would like to reload the block info or smoething like that. click yes and it will be fast.
- Next step: once youve done that open the masternode window and you should see your newly created masternode. If you see it and see it says missing? Don't worry just click at lower left bottom start masternode. Then after a minute you can look up and see the statuus of the masternode is now enabled.
Congratulations!!!!!!
You have successfully created the SK21 masternode.
Written by Brazilman37BTC
if not using wallet for masternode use node for normal wallet.
Imediate Roadmap
-Premining and Mainnet test
-Masternode mainet test
-Mining Pools
-Swap with old skull coins (not mandatory) Exchange is compiling now
-Specific information and guide to set masternode dark send mix and other coin features
-WebSite and Media
-Masternodes for dummies
-Strong crypto exchanges
-Games development
New Twitter page here:
https://twitter.com/Sk21Coin
1st AID & Early Swap at our Slack
https://join.slack.com/t/pirateblocks/shared_invite/MjIzMTAxNjExMTczLTE1MDIwODgyNzItMTFjMWU0ZTc1Ng
DOWNLOAD
NEWS:
-MINING POOL WANTED!
-50 PAX AIRDROP STARTING NOW
-PSP SWAP OPEN NOW 1:1
-NOVA EXCHANGE WILL SWAP 1:1 WHEN THEY COMPILE
-OPEN TRANSLATION BOUNTY RESERVE TO QUALIFIED CANDIDATES
-MINING POOL WANTED!
-50 PAX AIRDROP STARTING NOW
-PSP SWAP OPEN NOW 1:1
-NOVA EXCHANGE WILL SWAP 1:1 WHEN THEY COMPILE
-OPEN TRANSLATION BOUNTY RESERVE TO QUALIFIED CANDIDATES
to apply for airdrop :
(only 50 p)
-download wallet and get address
-tweet: '' new $sk21 skull evolution is live, masternodes-mix-dark send-airdrop https://bitcointalk.org/index.php?topic=2176430.new#new''
attaching a logo picture to the tweet
-retweet : https://twitter.com/Sk21Coin/status/908391073013227526
-Post a support comment at https://bitcoingarden.org/forum/index.php?topic=19259.msg195684#msg195684 about our coin
(a comment, not three words or repite other posts)
this 4 task will receive a reward of 10$ worth sk-21 that will be paid as the airdrop 50 people registered post their proofs only in reply to this thread and quoting this message
to swap your coins:
option a: send skull to PAZA6DMFyfGakrs3fKhXQS7UgMPjYhkP3h with attached following info:
-amount sent & txid
-sk21 address to receive your sk21
option b: wait nova to compile and change your coins at nova
THERE ARE NO BONUSES AND SWAP RATIO IS ALWAYS 1-1
SWAPPED SKULL WILL BE BURNT AFTER A SECURITY PERIOD OF 15 DAYS AFTER THE SWAP NOT BE REFUNDABLE
ONLY CAN RESTORE SWAPPED SKULL IN CASE OF SK21 FAILURE
YOU CAN MINE NOW FROM YOUR WALLET
Update!!!!
Sample images of new SK21 casino gaming site. e are aware of spelling errors and coin image errors as we wanted to put out some samples to help keep everyone with an idea of whats to come. This site will go live very soon. Stay tuned!!!
More news as it becomes available!!!
Sample images of new SK21 casino gaming site. e are aware of spelling errors and coin image errors as we wanted to put out some samples to help keep everyone with an idea of whats to come. This site will go live very soon. Stay tuned!!!
More news as it becomes available!!!