Topic: [ANN] (SLACK) Econocalypse : 👽 🛸 💰 DobbsCoin v2.0 (QUARK POW/POS+[MN]) 💰🛸👽 - page 3. (Read 2528 times)

THE 13013 BLOCK (sci-fi sounds)!!

Does its reward have its own address?  Prolly, since it's a PoW block reward.
You should dump the privkey for that one and store it offline in it's pristine unmolested form for all eternity, so it isn't spent until X-Day. I bet it'll open the portal at the end of time and no doubt magically enhance your sexual prowess. Blessed are thee

Interesting sidebar:  I added this to my conf

connect=75.131.236.146:13013
connect=149.28.13.26

and removed server=1 and listen=1 er anything that might make it look for other nodes besides those two, cos they were both on 13013, then spawned the windows wallet from command line, then also spawned the -cli.exe wallet.. and did the getinfo..   and it seemed to be synched at 13013.. so then I killed it, opened up the QT wallet and it was also at 13013 - but masternodes still not enabled yet. -YET.  

Mine as well..

My master node is back online

My wallet was in staking status but I closed it to add the above nodes and restarted it, now says staking not active again.

heh

./econocalypse-cli getmininginfo
{
  "blocks": 13013,
  "currentblocksize": 1000,
  "currentblocktx": 0,
  "difficulty": 6.027633696338321,
  "errors": "",
  "genproclimit": -1,
  "networkhashps": 42538741,
  "pooledtx": 0,
  "testnet": false,
  "chain": "main",
  "generate": false,
  "hashespersec": 0
}
./econocalypse-cli getstakingstatus
{
  "validtime": true,
  "haveconnections": true,
  "walletunlocked": true,
  "mintablecoins": true,
  "enoughcoins": true,
  "mnsync": true,
  "staking status": true
}

my node seems to ok ... to stake!

---

This on my desktop wallet ...
Stato: 1/unconfirmed
Data: 20/04/2019 16:25
Source: Generated
Credit: 50.00000000 SLACK
Net amount: +50.00000000 SLACK
Transaction ID: 0d4972f6633907a3a1c2d38bc7fcfc399b062f2a5bf356b8a69a192512f0a72f
Output index: 0

Generated coins must mature 31 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.


I've found the #13013 block ... but chain seems still hanged  ... I think there are many chain forks
near 1301x block ...

Basic Ticket Information
Ticket Status:    Open
Department:    Support
Create Date:    04/20/2019 8:41 AM
   
User Information
Name:    Btcbob
Email:    [email protected]


BtcBob posted 04/20/2019 8:41 AM
50+ peers on my seed nodes, 12 masternodes at end of PoW..
Last PoW block was supposed to be 13013
All but 2 peers STUCK at 13012..
One peer reports being stuck at 13013 and reports another peer with him.

Seed wallets node1 & node2 are on 13012, but show a handful of peers on 13013

addnode [2a00:6d40:72:9764::1001]:13013 add
addnode 109.241.110.231:60004 add
addnode 98.29.247.84:55283 add
addnode 96.243.59.237:42754 add

Still showing 13 masternodes - still stuck 0n last block
WELCOME BACK

I zeroed the block chain, erased addnode from .conf e tried to resync ... now the height is 13010 in VPS node . The same in the desktop but height is 13008. I think that blockchain has forked at 13010-1312 and trying to resync drop some blocks. And chains is returned  back to POW side and none is mining. What a big mess ... we need devs!

EDIT :I restarted two desktop wallets zer0ing the chain, and  saving the wallet  e restart mining ...

I have done this with my wallet

addnode=80.211.84.69:13013
addnode=80.211.100.240:13013
addnode=80.211.84.51.100
Theses are my VPS staking nodes. They have 13013 height and staking active, but only few coins ! So that blockchain can not restart.
So that try to charge a desktop wallet using a lot of  coins, delete peers.dat and add this node list in econocalypse.conf. To try to unlock the chain.
I think POW is finished but POS mining is hanged. Only few nodes have 13013 height and stacking active so that POS phase cannot start! The blockchain cannot restart in this condition!

I've actually advanced to block 13013 and was able to restart MN (wallet crashed at block 13012 and needed restarted, however I wasn't able to restart the MN after restarting due to error that wallet needed to sync.  After it advanced to block 13013 i was able to restart the MN).



{
  "version": 1000000,
  "protocolversion": 70914,
  "walletversion": 61000,
  "zerocoinbalance": 0.00000000,
  "blocks": 13013,
  "timeoffset": -1,
  "connections": 8,
  "proxy": "",
  "difficulty": 6.027633696338321,
  "testnet": false,
  "moneysupply": 22650523.68628995,
  "zSLACKsupply": {
    "1": 3026.00000000,
    "5": 9675.00000000,
    "10": 19310.00000000,
    "50": 1500.00000000,
    "100": 4500.00000000,
    "500": 3500.00000000,
    "1000": 8000.00000000,
    "5000": 70000.00000000,
    "total": 119511.00000000
  },
  "keypoololdest": 1554529965,
  "keypoolsize": 1001,
  "unlocked_until": 0,
  "paytxfee": 0.00000000,
  "relayfee": 0.00010000,
  "staking status": "Staking Active",
  "errors": ""
}

---

I only show one peer at block 13013 with me.  All other peers are still at 13012...


    "id": 20,
    "addr": "[2a00:6d40:72:9764::1001]:13013",
    "addrlocal": "[2607:fcc8:f2c4:e200:5caf:1693:e48b:7dcb]:57168",
    "services": "0000000000000005",
    "lastsend": 1555746860,
    "lastrecv": 1555746861,
    "bytessent": 11149,
    "bytesrecv": 9399,
    "conntime": 1555744819,
    "timeoffset": -1,
    "pingtime": 0.126585,
    "version": 70914,
    "subver": "/Econocalypse Core:1.0.0/",
    "inbound": false,
    "startingheight": 13013,
    "banscore": 1,
    "synced_headers": -1,
    "synced_blocks": -1,
    "inflight": [
    ],
    "whitelisted": false

I had put the original discord server up and 3 days ago it was gone from my account. I created the server but somehow someone must have reported it and discord took it down. And the mods here keep deletall my posts

Nope, everyone is stranded on 13012 currently..  The NEXT block *would* have been the END of PoW



Please leave things as they are. =p

So, am I the only one that seems to be stuck on block 13012? And if so, what do I need to do?

No problem.  I was just having a hell of time of it, and I thought, "I should write this down in case it actually works."  Some of the info I cribbed from the litecoin source compile instructions.  When configure ran with no errors I knew I was cooking with gas.  When make finished with no errors I knew that gas was propane.

This worked like a charm for me with Ubuntu Mate 16.04 & 18.04.  thank you!

QUARK Algorithm that starts out as a Proof of Work coin for 13013 blocks.. then switches to Proof of Stake, offering "interest" on the number of coins idle/staked in the wallet.. like a SLACK savings account.


It also allows you ..rewards you even, to setup a MASTERNODE.. where your one computer will stay online 24/7, acting as a full node with a complete block chain - always synched to the other masternodes.. which, since there's no longer any "WORK" being done, helps ensure/secure the block chain from 51% attack, 'er someshit.


Have you got a shell/VPS or a box with a static IP?
It fairly important when operating a masternode, but just leaving the wallet running, with a balance - will still earn staking interest, once the Proof of Work period is over..

Current Networkhps: 273.75 MH/s - Current Difficulty: 10.02629540738758 - Current Block: 12396

PRV. MSG me here, once your wallet is synched up and let's have some fun.
OPEN OFFER - RSVP.

LAST PoW Block is #13013. Won't be long.

Please explain this thing: Quark pow/PoS technology what does it mean? I have never heard about this one.

It appears that in order for them to mature there have to be a specific number of zSLACK minted after yours. Just like with normal block rewards, they don't mature until more are created. So if everyone has their zSLACK automint turned off and no more is being created, then they won't mature. At least that's the way I'm understanding it.

Are we going to have to do anything to stake our SLACK when it switches to POS tomorrow? Is a wallet upgrade going to be needed? Are we going to have to type anything into the console to stake?

doh-
https://discord.gg/4TMCUkb