[ANN] sph-sgminer: multi-coin multi-algorithm GPU miner | added MaruCoin - page 64.

101hz

newbie

Activity: 2

Merit: 0

Code:

1.228M on GPU 0/1 and 2,7M on GPU 2 - is this normal?

config : --auto-fan --gpu-fan 0-85 --gpu-powertune 10 --temp-target 76 --temp-overheat 85 --temp-cutoff 87 -g 1 -w 512 --lookup-gap 2 --thread-concurrency 32765 --failover-only --xintensity 1100

drr0ss

member

Activity: 98

Merit: 10

Hi,

Here you can find a compilation of today-02/03/2014

https://drive.google.com/folderview?id=0B3TH7a-0opyWeVg2V2FhdmhEVXM&usp=sharing

Hahhh, for Windows

he02312405

newbie

Activity: 21

Merit: 0

0xc000007b error Huh

manav1112

sr. member

Activity: 298

Merit: 250

I have a R9 280x GPU and a HD 7950 and a HD 7770 all mining on a profitability switching pool, but would it be better to switch onto here?

badman74

hero member

Activity: 658

Merit: 500

Quote from: hiltonizer on March 02, 2014, 12:21:12 AM

Quote from: badman74 on March 01, 2014, 11:19:16 PM

Quote from: hiltonizer on March 01, 2014, 10:39:18 PM

Quote from: badman74 on March 01, 2014, 10:24:32 PM

Quote from: hiltonizer on March 01, 2014, 09:57:43 PM

Not showing any activity on my worker for Darkcoin, its chugging away but nothing is showing as "accepted" as I've seen in other screenshots. What's botched? Below are a screener and the contents of my .bat

FWIW my card is a 7850

set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=1
sgminer -k darkcoin -o stratum+tcp://pool.darkcoin.io:3333 -u ~~~~.1 -p ****** -I 18 -g 4 -w 128

as far as i can tell your setup is fine, although i have never been able to make any of my cards work stable above -g 2
does it still do this after restart and have you tried a different pool?

edit: you shouldn't be getting HW errors if things are working right....
try -g 2 and or lower intensity see if that helps at all

no dice

this is the 2nd pool ive tried (I only went to the main one for the coon as another didnt work before it). I've been mining TiPS for the last few days at a good clip so i'm not sure what the deal is.

hmm have you tried one of the other builds on the OP?
i havent actually tested the latest build myself

edit: just tested newest build
seems to work fine for me
havent tested myr yet but thats cause i am not mining it

At first I tried the sgminer build up on the darkcoin site, then after that had this same issue I found sph in my googling for a solution. Seems I'm plagued here with either of these. CGminer is however working fine with the same settings for TiPS. harumph.

i cant think of anything else that could cause this other than a pool issue....
you can try --thread-concurrency 3200 but if that was the problem it would probably crash the computer instead of what you are seeing
also you could try mining TiPS with sgminer and see if it works there

hiltonizer

member

Activity: 104

Merit: 10

Quote from: badman74 on March 01, 2014, 11:19:16 PM

Quote from: hiltonizer on March 01, 2014, 10:39:18 PM

Quote from: badman74 on March 01, 2014, 10:24:32 PM

Quote from: hiltonizer on March 01, 2014, 09:57:43 PM

Not showing any activity on my worker for Darkcoin, its chugging away but nothing is showing as "accepted" as I've seen in other screenshots. What's botched? Below are a screener and the contents of my .bat

FWIW my card is a 7850

set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=1
sgminer -k darkcoin -o stratum+tcp://pool.darkcoin.io:3333 -u ~~~~.1 -p ****** -I 18 -g 4 -w 128

as far as i can tell your setup is fine, although i have never been able to make any of my cards work stable above -g 2
does it still do this after restart and have you tried a different pool?

edit: you shouldn't be getting HW errors if things are working right....
try -g 2 and or lower intensity see if that helps at all

no dice

this is the 2nd pool ive tried (I only went to the main one for the coon as another didnt work before it). I've been mining TiPS for the last few days at a good clip so i'm not sure what the deal is.

hmm have you tried one of the other builds on the OP?
i havent actually tested the latest build myself

edit: just tested newest build
seems to work fine for me
havent tested myr yet but thats cause i am not mining it

At first I tried the sgminer build up on the darkcoin site, then after that had this same issue I found sph in my googling for a solution. Seems I'm plagued here with either of these. CGminer is however working fine with the same settings for TiPS. harumph.

badman74

hero member

Activity: 658

Merit: 500

Quote from: hiltonizer on March 01, 2014, 10:39:18 PM

Quote from: badman74 on March 01, 2014, 10:24:32 PM

Quote from: hiltonizer on March 01, 2014, 09:57:43 PM

Not showing any activity on my worker for Darkcoin, its chugging away but nothing is showing as "accepted" as I've seen in other screenshots. What's botched? Below are a screener and the contents of my .bat

FWIW my card is a 7850

set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=1
sgminer -k darkcoin -o stratum+tcp://pool.darkcoin.io:3333 -u ~~~~.1 -p ****** -I 18 -g 4 -w 128

as far as i can tell your setup is fine, although i have never been able to make any of my cards work stable above -g 2
does it still do this after restart and have you tried a different pool?

edit: you shouldn't be getting HW errors if things are working right....
try -g 2 and or lower intensity see if that helps at all

no dice

this is the 2nd pool ive tried (I only went to the main one for the coon as another didnt work before it). I've been mining TiPS for the last few days at a good clip so i'm not sure what the deal is.

hmm have you tried one of the other builds on the OP?
i havent actually tested the latest build myself

edit: just tested newest build
seems to work fine for me
havent tested myr yet but thats cause i am not mining it

hiltonizer

member

Activity: 104

Merit: 10

Quote from: badman74 on March 01, 2014, 10:24:32 PM

Quote from: hiltonizer on March 01, 2014, 09:57:43 PM

Not showing any activity on my worker for Darkcoin, its chugging away but nothing is showing as "accepted" as I've seen in other screenshots. What's botched? Below are a screener and the contents of my .bat

FWIW my card is a 7850

set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=1
sgminer -k darkcoin -o stratum+tcp://pool.darkcoin.io:3333 -u ~~~~.1 -p ****** -I 18 -g 4 -w 128

as far as i can tell your setup is fine, although i have never been able to make any of my cards work stable above -g 2
does it still do this after restart and have you tried a different pool?

edit: you shouldn't be getting HW errors if things are working right....
try -g 2 and or lower intensity see if that helps at all

no dice

this is the 2nd pool ive tried (I only went to the main one for the coon as another didnt work before it). I've been mining TiPS for the last few days at a good clip so i'm not sure what the deal is.

badman74

hero member

Activity: 658

Merit: 500

Quote from: hiltonizer on March 01, 2014, 09:57:43 PM

Not showing any activity on my worker for Darkcoin, its chugging away but nothing is showing as "accepted" as I've seen in other screenshots. What's botched? Below are a screener and the contents of my .bat

FWIW my card is a 7850

set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=1
sgminer -k darkcoin -o stratum+tcp://pool.darkcoin.io:3333 -u ~~~~.1 -p ****** -I 18 -g 4 -w 128

as far as i can tell your setup is fine, although i have never been able to make any of my cards work stable above -g 2
does it still do this after restart and have you tried a different pool?

edit: you shouldn't be getting HW errors if things are working right....
try -g 2 and or lower intensity see if that helps at all

hiltonizer

member

Activity: 104

Merit: 10

Not showing any activity on my worker for Darkcoin, its chugging away but nothing is showing as "accepted" as I've seen in other screenshots. What's botched? Below are a screener and the contents of my .bat

FWIW my card is a 7850

set GPU_MAX_ALLOC_PERCENT=100
set GPU_USE_SYNC_OBJECTS=1
sgminer -k darkcoin -o stratum+tcp://pool.darkcoin.io:3333 -u ~~~~.1 -p ****** -I 18 -g 4 -w 128

pavan@hosur

sr. member

Activity: 499

Merit: 250

i need r9 280x for darkcoin pls

example .bat

rest0r

newbie

Activity: 31

Merit: 0

Quote from: junkun13 on March 01, 2014, 12:28:15 PM

zlib1.dll error missing Huh

Copy it over from a cgminer folder.

ol92

sr. member

Activity: 445

Merit: 255

Quote from: willapl on March 01, 2014, 03:32:00 PM

Me too.
Myriad not working

I have solomined myriad groestl with sphminer and It works on my R9 290 : I presume the problem is on the pool side.
I have solomined with qubit and later on with groestl with success (you need to specify the algo on the wallet conf too).

willapl

newbie

Activity: 40

Merit: 0

Me too.
Myriad not working

junkun13

newbie

Activity: 49

Merit: 0

zlib1.dll error missing Huh

Mantiska

newbie

Activity: 47

Merit: 0

It seems with my miner's config something wrong
My miner:
http://s8.uploads.ru/QU8Mk.png
Pool:
http://s9.uploads.ru/U37Vd.png
And 0 q2c. What did I do wrong?
Can anybody help me with this?

Afros

newbie

Activity: 19

Merit: 0