Topic: [ANN] STAKE - Decentralized P2P Casino and SportsBook Platform [POW/POS] - page 3. (Read 19573 times)

So, what we have ?

---
No answer in 2 weeks, but it is serious question. This is the meaning of this coin.

---
No answer too.

---
Ant it's real. Mathematic.

---
All positive comments in this thread are made by new reg users - March 2018.

---
DEV is offline for 10 days.
Also his profile was created in the end of November 2017, but 1 post was made February,14 2018 in this thread. What were you doing for 2.5 months ?

---
Considering all the facts, Stakecoin is scam

Can you tell us a little more about your plans ?
- when white paper will be released ?
- what Market will be next ? I think Tradesatoshi is not a good choice.
- will you contact with real Casino ? what Casino's it will be ?
 

Nobody. Just wait.

When I send coin from wallet to exchange and it doesn't arrive, who do I contact besides the exchange?

Pow phase is end. Only pos

Any pools for the coin?

Can`t believe it ! It`s him !! It`s Warren Buffet !! Thank u mr Muppet for your advice. U saved my life !! Another beauty

Lol, I have an opposite view

Guys don't push so hard for masternodes. in two weeks or in 20 days max, reward downs 1/10 current projected income per day $1,5 , in two weeks it'll be $0,15 (even current MN counts stay same, off course there will be more MNs and less income) eventually price will go deadly low, like 0,0000001 usd or something. because all MN owners will sell. Baby casino born dead  

it would be nice to hear a bit more about the platform itself.  People's main concern with poker sites is that they just end up losing their money to bots.  There's no shortage of shitty gambling sites at the moment

Thank you. It's clear now.

MN1 IP:33234 key txid 0 otherwallet 100

right ?

You need have coins at your local wallet => let it sync => let the coins matured (the more conf it gets the more it stakable) => let wallet be online 24/7 for staking. Enjoy!
Better buy coins for masternode, it is 80% reward, instead 20% reward of staking.

Please, can someone help me to configure staking?

Just an advise, also add a reward address and put 100 % payout. Like this you dont leave any coins on your vps in case something goes wrong with it.

Enjoy

Thank you very much for this clear explanation. It works.

That link is for that specifically.

https://github.com/Duffman791/stakemn is for hot linux

please Cold masternode setup? win wallet+linux vps

Or you can just join the Discord, look at announcements, and use my github.

https://github.com/Duffman791/stakemncold

Included an automagic script for VPS and detailed instructions on how to configure windows to work with the linux vps.  I am always available for support in the discord as well.

MASTERNODE WINDOWS VPS SETUP

STAKE MASTERNODE SETUP GUIDE WINDOWS - WINDOWS VPS
Setting up a masternode for the Stake Masternode is straightforward. However, a few steps have to be followed in order to make it work smoothly.

Prerequisites:

77.777 coins

Wallet Windows

White static IP with open ports for masternodes

​

PREPARING MASTERNODE

​

1 - Choose the directory where you will hold your masternodes (you need 1.5Gb free space for every masternode)

2 - Create a folder "StakeMN1" there

3 - Copy file "Stake-qt.exe" to folder "StakeMN1"

4 - Create a new folder "data" in folder "StakeMN1"

6 - Rename "Stake-qt.exe" to "Stake-mn1.exe"

7 - Press Win+R and type "cmd" and press Enter

8 - Now type there:

echo start stake-mn1.exe -datadir=./data > %homepath%/Desktop/startmn1.cmd

9 – Move created file "startmn1.cmd" from Desktop to the "StakeMN1" folder

10 - Repeat the process from step 2 for each masternode you want to create, changing mn1 to mn2, mn3

11 - Run startmn1.cmd, startmn2.cmd and startmn3.cmd, wait for complete loading wallets and complete syncing with blockchain

12 - Now you can exit from each running masternode wallet

PREPARING CONTROLLER WALLET

​

1 - Open your main wallet where you have your coins

2 - Go to File >> Receiving Addresses

3 - Press button "New" and enter "Masternode 1" in Label, followed by “OK”.

4 - Send 77.777 STAKE to this address

5 - Wait for 30 confirmations of the transaction and go to Tools >> Debug Console

6 - Run command "masternode genkey" and copy down generated key (this is your masternode private key)

7 - Run command "masternode outputs" and copy down hexnumbers (this is your masternode tx) and digit after ":" (this is tx index)

8 - Go to Tools >> Open Masternode Configuration File (masternode.conf), and open with Notepad.

9 - Using (one line per masternode), use the following format:

Alias IP:Port Privkey TxHash OutputIndex

​

10 – As "Alias", enter "MN1" (do not use spaces and special characters)

11 – As "IP:Port", enter "YOUREXTERNALIP:PORT" (your external white IP and port for masternode), such as 123.456.789:48882 12 – As "Privkey", enter the masternode private key you generated with "masternode genkey"

13 – As "TxHash", enter the masternode tx from "masternode outputs" command

14 – As "OutputIndex", enter the tx index from "masternode outputs" command (0 or 1)

15 - Now you can File >> Save and exit out.

16 - In Case you want to setup multiple Masternodes, repeat the process from step 2 for MN2 and MN3, while renaming MN1 to MN2 and MN3 and changing ports

17 - Press "Update Status" and you will see all three masternodes in list with status "Not in the masternode list."

CONFIGURING MASTERNODES

​

1 - Go to "StakeMN1/data" folder

2 - Open "stake.conf" in Notepad

3 - Type there: port=PORT masternode=1 masternodeaddr=IP:PORT masternodeprivkey=PRIVKEY

​

File should look like this:

​

rpcuser=CHOOSE_YOUR_USER here
rpcpassword=< CHOOSE YOUR PASSWORD here>
rpcallowip=127.0.0.1
listen=1
server=1
daemon=1
staking=0
logtimestamps=1

​

port=< PORT >
masternode=1
masternodeaddr=< IP >:< PORT >
masternodeprivkey=< PRIVKEY >

​

4 - Replace PORT with the port used for your Masternode 1, IP:PORT with your external white IP and the same port for your Masternode 1

5 - Replace PRIVKEY with the masternode private key you generated with "masternode genkey" in controller wallet for Masternode 1

6 - Save it and repeat process for Masternode 2 and Masternode 3 (in case you set up multiple)

​

STARTING MASTERNODES

​

1 - Now you can start all your masternodes with "startmn1.cmd", "startmn2.cmd" and "startmn3.cmd"

2 - Go to controller wallet, check that your transactions in Masternode 1, 2 and 3 addresses have at least 15 confirmations.

3 - Go to the "My Masternodes" tab.

4 - Press "Start All"stake

If you liked the tutorial and you are considering to donate, please :

BTC: 18GcMowzdJgBGwpSgg59DMvWDY1f5xTcaV
ETH: 0x8dc0f698b30a20618a9870b781f189239e878e54
Stake: SPhviVtgSCxhQqwBxGqhoTT6Yjoj3zVu1G