Topic: [ANN] StarCashX (STARX) [PoS]+[MN] - page 2. (Read 1001 times)

Video guide how to setup masternode

https://www.youtube.com/watch?v=UxwLoyVQkKQ

A big thanks to the StarCashX community for supporting us!

We will give our best to make STARX a success 

It's true, we hope everything goes well.
this is the first project that I have evaluated and I have been holding hard for several months

anyway ... still we did not understand why the last dev went away ... maybe too much tension XDXD ... the fact is that he behaved really badly with some of the community.

Hope the new dev can make this project more active!

Damn the former dev left this project and gone... the community is waiting for some positive news on this !

I am sure new dev is informing the upcoming changes to active exchange. Better be a step ahead and let them know on this to avoid any future discretion.

Step-by-step guide for starting multiple masternodes (3 masternodes in this example)


STEP 1 : Prepairing masternodes

    1 - Choose the place where you will hold you masternodes dirs (you need 1,5Gb free space for every masternode)
    2 - Create folder "SCXMN1" there
    3 - Copy file "StarCashX-qt.exe" in folder "SCXMN1"
    4 - Create in folder "SCXMN1" new folder "data"
    5 - Copy file "blk0001.dat" and folder "txleveldb" in created folder "data"
    6 - Rename "StarCashX-qt.exe" to the "SCXMN1.exe"
    7 - Press Win+R and type "cmd" and press Enter
    8 - Now type there:

Code:

echo start scxmn1.exe -datadir=./data > %homepath%/Desktop/startmn1.cmd

 
    9 - Move file "startmn1.cmd" from Desktop to the "SCXMN1.exe" folder
   10 - Repeat the process from step 2 for each masternode you want to created, with changing mn1 to mn2, mn3
   11 - Run startmn1.cmd, startmn2.cmd and startmn3.cmd, wait for complete loading wallets and complete syncing with blockchain
   12 - Now you can exit from each running masternode wallets

STEP 2 : Prepairing controller wallet

    1 - Open your main wallet where you have your coins
    2 - Go to Recieve tab
    3 - Press button "New address" and enter "Masternode 1" in Label (do not check "Stealth address")
    4 - Send to this address exactly 3000 StarCashX
    5 - Wait for 1 confirmation of transaction and go to the Debug console
    6 - Run command "masternode genkey" and write down generated key (this is your masternode private key)
    7 - Run command "masternode outputs" and write down hexnumbers (this is your masternode tx) and digit after ":" (this is tx index)
    8 - Go to Masternodes tab and switch to the "My Masternodes"
    9 - Press button "Create"
   10 - Enter "Alias" - "MN1" (do not use spaces and special charatcers)
   11 - Enter "Address" - "YOUREXTERNALIP:PORT" (your external white ip and port for masternode)
   12 - Enter "Privkey" - masternode private key you generated with "masternode genkey"
   13 - Enter "TxHash" - masternode tx from "masternode outputs" command
   14 - Enter "Output Index" - tx index from "masternode outputs" command
   15 - Now you can press "Ok"
   16 - Repeat process from step 2 for MN2 and MN3. With renaming MN1 to MN2 and MN3 and changing port

#################################################################################################################################################

When you get to step 7 "masternode outputs" in second time you will see 2 lines with txhash and index. You must choose the new line with txhash.
When you get to step 7 "masternode outputs" in third time you will see 3 lines with txhash and index. You must choose the new line with txhash.

#################################################################################################################################################

   17 - Press "Update" and you will see all three masternodes in list with status "Not in the masternode list."
 
#################################################################################################################################################

Steps 8-15 creates masternode.conf. You can skip this steps and create it by yourself.
It have format:
Code:

ALIAS IP:PORT PRIVKEY TXHASH OUTPUTINDEX

One line - one masternode config

#################################################################################################################################################

STEP 3 : Configuring masternodes

    1 - Go to "SCXMN1/data" folder
    2 - Open "StarCashX.conf" in Notepad
    3 - Type there:

Code:

port=PORT
masternode=1
masternodeaddr=IP:PORT
masternodeprivkey=PRIVKEY

     
    4 - Replace PORT with port for your Masternode 1, IP:PORT with your external white ip and the same port for you Masternode 1
    5 - Replace PRIVKEY with masternode private key you generated with "masternode genkey" in controller wallet for Masternode 1
    6 - Save it and repeat process for Masternode 2 and Masternode 3.

STEP 4 : Starting masternodes

    1 - Now you can start all your masternodes with "startmn1.cmd", "startmn2.cmd" and "startmn3.cmd"
    2 - Go to controller wallet, check that your coins in Masternode 1, 2 and 3 addresses have at least 15 confirmations.
    3 - Go to Masternodes tab and switch to the "My Masternodes"
    4 - Press "Start All"


Don't be afraid to running PoS on controller wallet. It's do not damaged your masternode transactions because all masternode coins will be excluded from PoS.

Unfortunately ... interesting projects left by dev, projects that are able to be large and useful must be left behind by other projects.
But the spirit of creating a new dev hopefully again and creatively you will be able to bring StarCashX to its destination.

Already 91 Masternodes running on the StarCashX network! A big thank you to our community 

Well done Devs,great to see a new Ann and Discord

Yes before swap it was Starcash, unfortaly the old dev left so we took over the project.

will wait for the website and want to see the roadmap from this project,,
so, this is a rebranded project, right ?
Starcash (STARS) has now swapped to a new chain and rebranded to StarCashX (STARX)

Website and Twitter coming soon!