Topic: [ANN] | STASH | Digital Money For Everyone | ZK-Snarks | iNodes (Masternodes) - page 11. (Read 67228 times)

Great, now the important thing is that everything works. Also have a question, how many transactions per second do you have supported? and what level of privacy?

IMPORTANT! DON'T FORGET TO REGISTER BEFORE 27-09-2018, 23:00UTC

REGISTRATION INSTRUCTIONS FOR STP TOKENS
 
WATCH THIS SHORT INSTRUCTIONS VIDEO ON HOW TO REGISTER YOUR STASH PUBLIC KEY
https://www.youtube.com/watch?v=BY0RJyNEkbY
 
For all STP token holders it is very important that you follow these instructions before the 27-09-2018, 23:00UTC or you will lose your STP tokens forever. There will be no way to recover your STP tokens if you do not follow these instructions and register your STASH Public Key.
 
Within forty-eight (48) hours after the 27-09-2018 23:00UTC, all STP Tokens will become fixed (ie. frozen) and non-transferrable on the Ethereum blockchain.
 
At this point it will be possible to launch a public blockchain platform adopting the open source STASHPAY.IO Software (an “STASHPAY Platform”) by generating a file or “snapshot” showing the fixed balances of the STP Tokens from the state of the Ethereum blockchain (the “Snapshot”).
 
In order for the balance of your STP Tokens to be included in any Snapshot, you must register your STASH Public Key against your Ethereum address.
 
It is very important that if you hold STP tokens you follow these instructions before the 27-09-2018, 23:00UTC or you will lose your STP tokens forever.
 
WATCH THIS SHORT INSTRUCTIONS VIDEO ON HOW TO REGISTER YOUR STASH PUBLIC KEY
https://www.youtube.com/watch?v=BY0RJyNEkbY
 
Useful Links
https://stashpay.io/paper-wallet.html
https://www.myetherwallet.com/
https://etherscan.io/
StashPay Contract address is: 0xecd570bbf74761b960fa04cc10fe2c4e86ffda36
 
Please note:
•   Registration is only required once for each Ethereum address, even if this address was used multiple times to purchase STP tokens.
•   You should hold all of your STP Tokens in the same Ethereum address and register your STP public key to that Ethereum address.
•   Do not register the address of an exchange account, if you hold STP tokens in an exchange account, you need to transfer your STP tokens to an Ethereum address which you have full control over before the STP Tokens become non-transferable on the Ethereum blockchain which is expected to occur Within forty-eight (48) hours after the 27-09-2018 23:00UTC and then use your own Ethereum address to register. We suggest you not wait until the last minute to register your Ethereum address with a STASH private and public key pair.
•   If you hold STP tokens in multiple Ethereum address, you need to register STASH keys for each one.
•   If you wish to transfer your STP tokens to another Ethereum address, you can generate a new pair of STASH public and private keys and register them with your new Ethereum address.
•   You can always generate a new pair of STASH public and private keys and register them with your Ethereum address. Every time you do this, the existing keys will be replaced with the new STASH public and private keys.
•   If you move your STP tokens to a new Ethereum address after you have registered your STASH public key, you will need to re-register your STASH public key from the new Ethereum address
 
Please watch the instructions video or see the register instructions below for further details on how to register your STASH Public Key.

WATCH THIS SHORT INSTRUCTIONS VIDEO ON HOW TO REGISTER YOUR STASH PUBLIC KEY
https://www.youtube.com/watch?v=BY0RJyNEkbY
 

Yeah this is quite correct than the text instruction which state that publickey is needed, and i thought i need to check my wallet info just to get 130 character publickey lol.

This video can save your day. You should watch it in order to perform the registration of the public key. It should be easy.

I just figured out it's not actually the public key but the wallet address. I think they should change the text instruction because i haven't watched the video before i ask about this. Anyway thanks for all who answered.

Best join the telegram group for support

Yes I have ETH on MEW.I do everything as in the video instructions. But the last step is " 12. publicKeys-Query" - Public key does not appear(

Do you have Eth on your wallet to pay gas as fee? maybe you need to re-WATCH THIS SHORT INSTRUCTIONS VIDEO ON HOW TO REGISTER YOUR STASH PUBLIC KEY
https://www.youtube.com/watch?v=BY0RJyNEkbY

I tried several times, but it doesn't work. Why? I do everything according to the instructions, but registration does not occur.

The public key is the info that shows below PUBLIC. Your private key is the one under SECRET.

I'm having a problem and hard understanding about publickeys. Is it the 130 character public keys? Or my wallet address that i need to input? Don't want to waste ETH since the gas is higher today. Thanks.

IMPORTANT! REGISTRATION INSTRUCTIONS FOR STP TOKENS
 
WATCH THIS SHORT INSTRUCTIONS VIDEO ON HOW TO REGISTER YOUR STASH PUBLIC KEY
https://www.youtube.com/watch?v=BY0RJyNEkbY
 
For all STP token holders it is very important that you follow these instructions before the 27-09-2018, 23:00UTC or you will lose your STP tokens forever. There will be no way to recover your STP tokens if you do not follow these instructions and register your STASH Public Key.
 
Within forty-eight (48) hours after the 27-09-2018 23:00UTC, all STP Tokens will become fixed (ie. frozen) and non-transferrable on the Ethereum blockchain.
 
At this point it will be possible to launch a public blockchain platform adopting the open source STASHPAY.IO Software (an “STASHPAY Platform”) by generating a file or “snapshot” showing the fixed balances of the STP Tokens from the state of the Ethereum blockchain (the “Snapshot”).
 
In order for the balance of your STP Tokens to be included in any Snapshot, you must register your STASH Public Key against your Ethereum address.
 
It is very important that if you hold STP tokens you follow these instructions before the 27-09-2018, 23:00UTC or you will lose your STP tokens forever.
 
WATCH THIS SHORT INSTRUCTIONS VIDEO ON HOW TO REGISTER YOUR STASH PUBLIC KEY
https://www.youtube.com/watch?v=BY0RJyNEkbY
 
Useful Links
https://stashpay.io/paper-wallet.html
https://www.myetherwallet.com/
https://etherscan.io/
StashPay Contract address is: 0xecd570bbf74761b960fa04cc10fe2c4e86ffda36
 
Please note:
•   Registration is only required once for each Ethereum address, even if this address was used multiple times to purchase STP tokens.
•   You should hold all of your STP Tokens in the same Ethereum address and register your STP public key to that Ethereum address.
•   Do not register the address of an exchange account, if you hold STP tokens in an exchange account, you need to transfer your STP tokens to an Ethereum address which you have full control over before the STP Tokens become non-transferable on the Ethereum blockchain which is expected to occur Within forty-eight (48) hours after the 27-09-2018 23:00UTC and then use your own Ethereum address to register. We suggest you not wait until the last minute to register your Ethereum address with a STASH private and public key pair.
•   If you hold STP tokens in multiple Ethereum address, you need to register STASH keys for each one.
•   If you wish to transfer your STP tokens to another Ethereum address, you can generate a new pair of STASH public and private keys and register them with your new Ethereum address.
•   You can always generate a new pair of STASH public and private keys and register them with your Ethereum address. Every time you do this, the existing keys will be replaced with the new STASH public and private keys.
•   If you move your STP tokens to a new Ethereum address after you have registered your STASH public key, you will need to re-register your STASH public key from the new Ethereum address
 
Please watch the instructions video or see the register instructions below for further details on how to register your STASH Public Key.
 
 
How to Register My STASH Public Key?
 
WATCH THIS SHORT INSTRUCTIONS VIDEO ON HOW TO REGISTER YOUR STASH PUBLIC KEY
https://www.youtube.com/watch?v=BY0RJyNEkbY

1.   Move all your STP tokens from an exchange account to one Ethereum address that only you control
2.   Make sure you have all your STP tokens in one Ethereum address
3.   Make sure that only you hold the private keys to the Ethereum address where you hold your STP tokens
4.   Make sure you have a small amount of ETH in the address that holds your STP tokens. (e.g. 0.005 ETH) You will need this Ether to pay for the GAS so that you can register your STASH public key against your Ethereum address 
5.   Generate a pai
YouTube
Registration Instructions for STP Tokens + Advanced Section
IMPORTANT! REGISTRATION INSTRUCTIONS FOR STP TOKENS For all STP token holders it is very important that you follow these instructions before the 27-09-2018, ...
[Video]
 r of STASH public and private keys here https://stashpay.io/paper-wallet.html
6.   Important! Save your pair of STASH public and private keys in a secure location as you will need this pair of keys to claim your STASH on any blockchain that is launched using the STASHPAY.IO software
7.   Copy your STASH public key
8.   Go to https://www.myetherwallet.com/
9.   Click on “Contracts” in the top menu
10.   From the “Select Existing Contract” dropdown menu select “StashPay”
11.   Click the blue “Access” button
12.   In the Read / Write Contract section from the dropdown box select “registerKey”
13.   In the input box that appears below paste your STASH public Key which you generated earlier
14.   In the next section “How would you like to access your wallet?” select the wallet you’re currently using to store your STP tokens
15.   In this example I use a hardware Ledger wallet so I will select “Ledger”
16.   Select “Connect to Ledger”
17.   Select the address where you hold your STP tokens
18.   Click “Unlock address”
19.   On the MyEtherWallet page you will now see a blue button which reads “Write”
20.   Click on the “Write” button
21.   Next check you have correctly registered your STASH public keys against your Ethereum address where you hold your STP tokens
22.   In your web browser go to https://etherscan.io/
23.   In the top right hand corner in the search box paste in the StashPay contract address
24.   StashPay Contract address is: 0xecd570bbf74761b960fa04cc10fe2c4e86ffda36
25.   Next click the read contract tab
26.   Go to section “12 PublicKeys”
27.   In the “ (address)” box paste your STP Ethereum address this is the address where you currently hold your STP tokens
28.   Next click the “query” button
29.   If you have registered your STASH address correctly your STASH public key should be showing under “[ publicKeys method Response ]”
30.   Congratulation if you can see your STASH public key here you have registered your STASH public key correctly
31.   If you cannot see your STASH public key here after you click on “query” you must start the registration process again as you have not registered your STASH public key correctly
 
WATCH THIS SHORT INSTRUCTIONS VIDEO ON HOW TO REGISTER YOUR STASH PUBLIC KEY
https://www.youtube.com/watch?v=BY0RJyNEkbY
 
•   There is also a BIP39 tool available for advanced users for generating the public and private key pairs via word mnemonics. This can be found at https://stashpay.io/bip39.html

They are updating everyone on their telegram and a very few supporters are also posting it here. We'll know the codebase later when they announce it.

About Zk-Snarks, here's the team's most recent update from the Telegram channel
🔥August Stash Development Update🔥

🌎 Hi Everyone,
 
We are very excited to announce that the team has managed to integrate Zk-Snarks into the Stash code base.
 
This means all users of STASHPAY.IO will be able to send shielded transactions that will allow for the amount, origin and destination to be kept private while still verifying transfers on the blockchain.
 
This is a huge milestone for the STASH project as the integration of Zk-Snarks is very complex, time consuming and required solving numerous, challenging technical problems.
 
Stash is only one of a handful of projects that have managed to integrate ZkSnarks into a separate code base.
 
Some of you may be wondering what is Zk-Snarks?
 
Zk-Snarks stands for Zero-Knowledge Succinct Non-Interactive Argument of Knowledge. It is a form zero knowledge cryptography. Zk-Snarks essentially works on what is known as zero-knowledge proofs. The idea of zero-knowledge proofs originally comes from several MIT researchers back in the 1980s.
 
Zero-knowledge proofs means that between two parties of a transaction, each party can verify to the other that they have a specific set of information but without revealing what that information is. This is very different than other proof systems where at least one party needs to know all the information.
 
STASHPAY.IO uses Zk-SNARKs to prove that the conditions for a valid transaction have been satisfied without revealing any critical information about the values or addresses involved.
 
While the team is very pleased with the result there is still further work to be done. STASH developers are now moving to full testing on the STASH testnet including further testing of shielded transaction as well as incentivized nodes (iNdodes).
 
We are also in discussions with third parties about reviewing and testing STASHPAY.IO before it's release. We're excited about what's been achieved and will keep you all updated on further progress.
 
Regards🙏🙏🙏
 
STASH Team

Well i can't explain but you can get answer on STASH Telegram chat room.
You should join STASH Telegram community and ask questions to STASH admin.