Pages:
Author

Topic: [ANN] [SUP] Supcoin, PLUCK algorithm, Just Launched, Mine Now! - page 37. (Read 62226 times)

newbie
Activity: 11
Merit: 0
Looking at the hash on Suprnova, I see the top 15 > 12KH/s. This is on one pool so there might be other farms doing just solo. This pretty much shows that after the first few hours the coin is already out of reach of CPU mining. The GPU's have taken over in order to get that kind of hash. Unless of course you setup CPUs on 30 PCs running on this but that would not be feasible energy wise.

Anyways, at least I got about 4 coins right at the start and now just dust. Ill leave the mix of CPUs on it for a few days for another coin or two and then shut the CPU miners down.

There probably is some data to get out of this test, but so far the prima facie similarities with monero and all those other X coins are striking. When I left those coins way back they were all text based. What I like about Sup though is the nice graphical wallet and I can see a lot of hard work went into it. There were also excellent work done on the pools to have everything work so smoothly. I am super impressed by the pools especially with Suprnova. I am just disappointed with effort that went into getting GPU miners working before the launch as it took the CPUs out way too early. The distribution of the coins will be very narrow to the GPU miners which is a pity as broad based distribution (BBD) is a key factor to reduce the risk of a coin being manipulated or being dumped on by some unscrupulous miners. I think the hash rates are supporting my concerns and disappointment and indicative of an BBD opportunity missed. I will keep watching it though and look for opportunities in the markets once listed.

Lets hope that his next coin is released in a manner that is fair to all. This was supposed to be a test before the BIG one - hopefully lessons will be learned. When the scabs sell cheap i'll buy if the coin shows promise

I doubt anything will stay 100% cpu at this point in the game.  Someone is either going to write the code to use a gpu or eventually ASIC's will come about through some form of manipulation to run the game.  The only two major problems I am seeing at this point is that only the Nvidia GPU miner was available at the beginning which forces a good chunk of people like me to be stuck running CPU only and the Majority of people hopped on the Suprnova pool rather than spreading the hash out to the other two that are available on the main page.  Right now the advertised has for Suprnova is around 600Kh while the others are at around 8Kh and 3Kh.  With 215 workers on the Suprnova pool that equals about 3Kh per user average even if the top 20 are running GPU at 10 to 15Kh that leaves a lot of others still running cpu.

All I have to say otherwise is look a the other available pools and SPREAD THE HASH people.
sr. member
Activity: 249
Merit: 250
Looking at the hash on Suprnova, I see the top 15 > 12KH/s. This is on one pool so there might be other farms doing just solo. This pretty much shows that after the first few hours the coin is already out of reach of CPU mining. The GPU's have taken over in order to get that kind of hash. Unless of course you setup CPUs on 30 PCs running on this but that would not be feasible energy wise.

Anyways, at least I got about 4 coins right at the start and now just dust. Ill leave the mix of CPUs on it for a few days for another coin or two and then shut the CPU miners down.

There probably is some data to get out of this test, but so far the prima facie similarities with monero and all those other X coins are striking. When I left those coins way back they were all text based. What I like about Sup though is the nice graphical wallet and I can see a lot of hard work went into it. There were also excellent work done on the pools to have everything work so smoothly. I am super impressed by the pools especially with Suprnova. I am just disappointed with effort that went into getting GPU miners working before the launch as it took the CPUs out way too early. The distribution of the coins will be very narrow to the GPU miners which is a pity as broad based distribution (BBD) is a key factor to reduce the risk of a coin being manipulated or being dumped on by some unscrupulous miners. I think the hash rates are supporting my concerns and disappointment and indicative of an BBD opportunity missed. I will keep watching it though and look for opportunities in the markets once listed.

Lets hope that his next coin is released in a manner that is fair to all. This was supposed to be a test before the BIG one - hopefully lessons will be learned. When the scabs sell cheap i'll buy if the coin shows promise

"Life Isn't Fair" -Kiely
newbie
Activity: 47
Merit: 0
Looking at the hash on Suprnova, I see the top 15 > 12KH/s. This is on one pool so there might be other farms doing just solo. This pretty much shows that after the first few hours the coin is already out of reach of CPU mining. The GPU's have taken over in order to get that kind of hash. Unless of course you setup CPUs on 30 PCs running on this but that would not be feasible energy wise.

Anyways, at least I got about 4 coins right at the start and now just dust. Ill leave the mix of CPUs on it for a few days for another coin or two and then shut the CPU miners down.

There probably is some data to get out of this test, but so far the prima facie similarities with monero and all those other X coins are striking. When I left those coins way back they were all text based. What I like about Sup though is the nice graphical wallet and I can see a lot of hard work went into it. There were also excellent work done on the pools to have everything work so smoothly. I am super impressed by the pools especially with Suprnova. I am just disappointed with effort that went into getting GPU miners working before the launch as it took the CPUs out way too early. The distribution of the coins will be very narrow to the GPU miners which is a pity as broad based distribution (BBD) is a key factor to reduce the risk of a coin being manipulated or being dumped on by some unscrupulous miners. I think the hash rates are supporting my concerns and disappointment and indicative of an BBD opportunity missed. I will keep watching it though and look for opportunities in the markets once listed.

Lets hope that his next coin is released in a manner that is fair to all. This was supposed to be a test before the BIG one - hopefully lessons will be learned. When the scabs sell cheap i'll buy if the coin shows promise
sr. member
Activity: 490
Merit: 250
I mined 1 Sup..
not so bad with an i5 consdering 10 Sup as a block reward
member
Activity: 81
Merit: 1002
It was only the wind.
is it possible to allow ips without restarting daemon every time? Also it wont let me use rpcallow=* . Any bypass for this? thanks

0.0.0.0/0 ? I suck at networking, but I think anything /0 would work.
hero member
Activity: 554
Merit: 500
hmm... no AMD miner? Cry
full member
Activity: 126
Merit: 100
will there be support for cuda 2.1 in ccminer ?
legendary
Activity: 1638
Merit: 1013
I'm the top miner, last I checked, and using straight up server CPU resources.

You are forgetting one important factor - you are THE Wolf0 and I had to take off my shoes when I typed this. Smiley
legendary
Activity: 1638
Merit: 1013
Looking at the hash on Suprnova, I see the top 15 > 12KH/s. This is on one pool so there might be other farms doing just solo. This pretty much shows that after the first few hours the coin is already out of reach of CPU mining. The GPU's have taken over in order to get that kind of hash. Unless of course you setup CPUs on 30 PCs running on this but that would not be feasible energy wise.

Anyways, at least I got about 4 coins right at the start and now just dust. Ill leave the mix of CPUs on it for a few days for another coin or two and then shut the CPU miners down.

There probably is some data to get out of this test, but so far the prima facie similarities with monero and all those other X coins are striking. When I left those coins way back they were all text based. What I like about Sup though is the nice graphical wallet and I can see a lot of hard work went into it. There were also excellent work done on the pools to have everything work so smoothly. I am super impressed by the pools especially with Suprnova. I am just disappointed with effort that went into getting GPU miners working before the launch as it took the CPUs out way too early. The distribution of the coins will be very narrow to the GPU miners which is a pity as broad based distribution (BBD) is a key factor to reduce the risk of a coin being manipulated or being dumped on by some unscrupulous miners. I think the hash rates are supporting my concerns and disappointment and indicative of an BBD opportunity missed. I will keep watching it though and look for opportunities in the markets once listed.
newbie
Activity: 3
Merit: 0
through put needs fine tuning: here what you need to set depending your cards:
750ti 4
This parameter depends on the individual characteristics of each set of cards. In my case, there is a set of 6 cards running at 4 (memory Hynix), another 5 cards - at 1,955 (memory Hynix), another 2 cards - 1.8 (and excess immediately causes the crash of the driver, memory Samsung).
full member
Activity: 131
Merit: 100
My CPU miner closes after start...Why is this?
  Are you running a 32 bit OS or 64 bit OS & are you using a batch/bat/config file or settings ?  This is another way to start mining:  Open Command Prompt, drag the wolf cpu miner file over to the Command Prompt window, press space bar, copy & paste the following settings into the Command Prompt window and press enter = Mining on a Pool.  -o stratum+tcp://sup.suprnova.cc:7777 -O Username:Password
  I run 64 bit windows OS and batch file like this-./minerd -t 6 -s 4 -o stratum+tcp://sup.suprnova.cc:7777 -u Weblogin.WorkerName -p WorkerPassword  Your another way for mining is working fine,but mier uses only two threads...I have I7 processor...

write a new line in the bat file  pause
show what it says
newbie
Activity: 11
Merit: 0
My CPU miner closes after start...Why is this?

Are you running a 32 bit OS or 64 bit OS & are you using a batch/bat/config file or settings ?

This is another way to start mining:

Open Command Prompt, drag the wolf cpu miner file over to the Command Prompt window, press space bar, copy & paste the following settings into the Command Prompt window and press enter = Mining on a Pool.

-o stratum+tcp://sup.suprnova.cc:7777 -O Username:Password

I run 64 bit windows OS and batch file like this-./minerd -t 6 -s 4 -o stratum+tcp://sup.suprnova.cc:7777 -u Weblogin.WorkerName -p WorkerPassword

Your another way for mining is working fine,but mier uses only two threads...I have I7 processor...

You need to be using the miner posted in the first post of this thread for cpu or GPU.  I renamed the file so it was easier I would suggest you do the same so the wolf-pluckminer-generic64.exe would be just pluck.exe as is my case.

On the cpu side your batch needs to be something like this:

wolf-pluckminer-generic64.exe -o stratum+tcp://stratum.eu.sup.hardcoreminers.com:3022 -O Username.worker:password

You can use the same flags for thread if you like so you can add a -t 6 don't know about any others for this one.
full member
Activity: 147
Merit: 100
My CPU miner closes after start...Why is this?

Are you running a 32 bit OS or 64 bit OS & are you using a batch/bat/config file or settings ?

This is another way to start mining:

Open Command Prompt, drag the wolf cpu miner file over to the Command Prompt window, press space bar, copy & paste the following settings into the Command Prompt window and press enter = Mining on a Pool.

-o stratum+tcp://sup.suprnova.cc:7777 -O Username:Password

I run 64 bit windows OS and batch file like this-./minerd -t 6 -s 4 -o stratum+tcp://sup.suprnova.cc:7777 -u Weblogin.WorkerName -p WorkerPassword

Your another way for mining is working fine,but mier uses only two threads...I have I7 processor...
legendary
Activity: 1554
Merit: 1001
My CPU miner closes after start...Why is this?

Are you running a 32 bit OS or 64 bit OS & are you using a batch/bat/config file or settings ?

This is another way to start mining:

Open Command Prompt, drag the wolf cpu miner file over to the Command Prompt window, press space bar, copy & paste the following settings into the Command Prompt window and press enter = Mining on a Pool.

-o stratum+tcp://sup.suprnova.cc:7777 -O Username:Password
full member
Activity: 147
Merit: 100
My CPU miner closes after start...Why is this?
legendary
Activity: 1713
Merit: 1029
Anyone else having issues with ccminer rejecting most of the shares?

Have a 780 Ti running with a throughput of 3.1 (still playing around with this), however it only accepts about 10% of the shares.
legendary
Activity: 1428
Merit: 1001
getmonero.org
Any binary for CPU miner?

I compiled on a server but when i am trying to run it on other servers i am getting  error while loading shared libraries: libjansson.so.4: cannot open shared object file: No such file or directory

I am terribly bored to compile on each server right now....

 Thanks...

Anyone? Cheesy
legendary
Activity: 2087
Merit: 1015
Please can you help me to configure for GTX 560:

ccminer.exe -a pluck  -o stratum+tcp://sup.suprnova.cc:7777 -u ok.ok -p okpass
pause


the miner doesn't support cards using compute version older than compute 3.5
Which other miner can support this card?

None.
ASIC ?Possible?

No. Yes.
Hix
legendary
Activity: 1971
Merit: 1036
Please can you help me to configure for GTX 560:

ccminer.exe -a pluck  -o stratum+tcp://sup.suprnova.cc:7777 -u ok.ok -p okpass
pause


the miner doesn't support cards using compute version older than compute 3.5
Which other miner can support this card?

None.
ASIC ?Possible?
no
newbie
Activity: 26
Merit: 0
Please can you help me to configure for GTX 560:

ccminer.exe -a pluck  -o stratum+tcp://sup.suprnova.cc:7777 -u ok.ok -p okpass
pause


the miner doesn't support cards using compute version older than compute 3.5
Which other miner can support this card?

None.
ASIC ?Possible?
Pages:
Jump to: