straight from @bittrex-rami,,, delisting warnings are updated weekly based on 7-day moving averages
so ppl we need to start trading this a bit so it gets moving
Topic: [ANN] Techcoin [TECH] [186,985 PoW coins 4% PoS] [BITTREX] [ALLCOIN] - page 10. (Read 69930 times)
August 03, 2014, 08:12:54 AM
August 03, 2014, 06:41:06 AM
iv'e asked them that. waiting for answer
August 03, 2014, 06:31:41 AM
0 active connections..block 5544
any nodes?
any nodes?
addnode=206.116.116.186:57697
addnode=50.188.14.165:57697
addnode=116.49.126.165:57697
addnode=24.85.126.229:57697
Thanks,
Bittrex should remove the warning "This market is in danger..." i think its necessary
August 03, 2014, 06:14:35 AM
ignore
August 03, 2014, 12:40:11 AM
0 active connections..block 5544
any nodes?
any nodes?
addnode=206.116.116.186:57697
addnode=50.188.14.165:57697
addnode=116.49.126.165:57697
addnode=24.85.126.229:57697
August 02, 2014, 11:38:25 PM
Anyone up for a meeting this week via Skype or IRC?
Possibly. I work by remote. I'm usually on skype. Edn247 has my skype id. ( I prefer it not to be public)
August 02, 2014, 11:12:48 PM
Anyone up for a meeting this week via Skype or IRC?
August 02, 2014, 10:10:19 PM
0 active connections..block 5544
any nodes?
any nodes?
August 02, 2014, 07:36:30 PM
We'll get that sorted out in the next version - if there are no PoW blocks produced until block 6000 (which at this point looks like that will happen) it's a pretty easy fix. Re-starting PoW after it had stopped seems to make the wallet a wee bit touchy, we can revert to the way it was after we pass block 6000 and it should sync just fine like it used to before the changes were introduced. We'll keep it the way it is right now so we don't cause unnecessary forking.
August 02, 2014, 04:53:50 PM
Cannot sync the wallet.
I've tryed to delete old blockchain and reload it but it is not loading at all.
After that, i have return my old files to the wallet - same - not syncing.
Any suggestions ?
I've tryed to delete old blockchain and reload it but it is not loading at all.
After that, i have return my old files to the wallet - same - not syncing.
Any suggestions ?
on github theres a downloadable blockchain, dowload it and replace the one in your appdata file and she should start syncing right away
Thanks. I'm so blind
Soooo If anyone have a problem with syncing the wallet. 1-st download the blockchain from the Github link on the OP, extract to appdata, start the wallet.
Works fine
August 02, 2014, 04:46:52 PM
windows wallet is working awesome for me 
lots of stakes being found, I found it a bit weird that I sent some to cc ex and it took like 12 hrs for them to get them, yet bittrex received them with in 20 mins or so?? not sure if ccex had updated? but I sent them a ticket to remind them
I'm staking just over 1k in my wallet and playing with a couple hundred in the markets (trying to make more)
lots of stakes being found, I found it a bit weird that I sent some to cc ex and it took like 12 hrs for them to get them, yet bittrex received them with in 20 mins or so?? not sure if ccex had updated? but I sent them a ticket to remind them I'm staking just over 1k in my wallet and playing with a couple hundred in the markets (trying to make more)
It looks like ccex just recently updated their wallet. As of yesterday they still had not updated and the coin was listed as under maintenance, but they are updated now. They were probably still on the old version when you first sent the coins.
August 02, 2014, 04:13:15 PM
Cannot sync the wallet.
I've tryed to delete old blockchain and reload it but it is not loading at all.
After that, i have return my old files to the wallet - same - not syncing.
Any suggestions ?
I've tryed to delete old blockchain and reload it but it is not loading at all.
After that, i have return my old files to the wallet - same - not syncing.
Any suggestions ?
on github theres a downloadable blockchain, dowload it and replace the one in your appdata file and she should start syncing right away
August 02, 2014, 03:14:46 PM
Cannot sync the wallet.
I've tryed to delete old blockchain and reload it but it is not loading at all.
After that, i have return my old files to the wallet - same - not syncing.
Any suggestions ?
I've tryed to delete old blockchain and reload it but it is not loading at all.
After that, i have return my old files to the wallet - same - not syncing.
Any suggestions ?
August 02, 2014, 01:26:28 PM
If anyone is having trouble compiling the qt wallet under linux, I have created a pull request that adds a modified .pro file that removes all mac and windows specific commands. It has not been approved or reviewed by the dev team as of yet, but I used it successfully.
The file is here https://github.com/KevinBiomech/Techcoin
The only difference is that there is now a file named techcoin-qt-linux.pro, so when you go to compile, the procedure is :
qmake techcoin-qt-linux.pro
make
If you started and got errors involving Mingw-48, this will solve the problem. Be sure to delete your Makefile before doing the above. (sudo rm Makefile).
To anyone who feels the urge to jump me for the level of detail, blow me. Linux users are frequently the reason people use Windows. We all start somewhere.
The file is here https://github.com/KevinBiomech/Techcoin
The only difference is that there is now a file named techcoin-qt-linux.pro, so when you go to compile, the procedure is :
qmake techcoin-qt-linux.pro
make
If you started and got errors involving Mingw-48, this will solve the problem. Be sure to delete your Makefile before doing the above. (sudo rm Makefile).
To anyone who feels the urge to jump me for the level of detail, blow me. Linux users are frequently the reason people use Windows. We all start somewhere.
Thanks, I merged it into the official repo.
My first git attempt
Happy to be of service. August 02, 2014, 01:21:42 PM
windows wallet is working awesome for me lots of stakes being found, I found it a bit weird that I sent some to cc ex and it took like 12 hrs for them to get them, yet bittrex received them with in 20 mins or so?? not sure if ccex had updated? but I sent them a ticket to remind them
I'm staking just over 1k in my wallet and playing with a couple hundred in the markets (trying to make more)
lots of stakes being found, I found it a bit weird that I sent some to cc ex and it took like 12 hrs for them to get them, yet bittrex received them with in 20 mins or so?? not sure if ccex had updated? but I sent them a ticket to remind them I'm staking just over 1k in my wallet and playing with a couple hundred in the markets (trying to make more)
August 02, 2014, 10:20:21 AM
If anyone is having trouble compiling the qt wallet under linux, I have created a pull request that adds a modified .pro file that removes all mac and windows specific commands. It has not been approved or reviewed by the dev team as of yet, but I used it successfully.
The file is here https://github.com/KevinBiomech/Techcoin
The only difference is that there is now a file named techcoin-qt-linux.pro, so when you go to compile, the procedure is :
qmake techcoin-qt-linux.pro
make
If you started and got errors involving Mingw-48, this will solve the problem. Be sure to delete your Makefile before doing the above. (sudo rm Makefile).
To anyone who feels the urge to jump me for the level of detail, blow me. Linux users are frequently the reason people use Windows. We all start somewhere.
The file is here https://github.com/KevinBiomech/Techcoin
The only difference is that there is now a file named techcoin-qt-linux.pro, so when you go to compile, the procedure is :
qmake techcoin-qt-linux.pro
make
If you started and got errors involving Mingw-48, this will solve the problem. Be sure to delete your Makefile before doing the above. (sudo rm Makefile).
To anyone who feels the urge to jump me for the level of detail, blow me. Linux users are frequently the reason people use Windows. We all start somewhere.
LOL!
August 02, 2014, 09:19:04 AM
If anyone is having trouble compiling the qt wallet under linux, I have created a pull request that adds a modified .pro file that removes all mac and windows specific commands. It has not been approved or reviewed by the dev team as of yet, but I used it successfully.
The file is here https://github.com/KevinBiomech/Techcoin
The only difference is that there is now a file named techcoin-qt-linux.pro, so when you go to compile, the procedure is :
qmake techcoin-qt-linux.pro
make
If you started and got errors involving Mingw-48, this will solve the problem. Be sure to delete your Makefile before doing the above. (sudo rm Makefile).
To anyone who feels the urge to jump me for the level of detail, blow me. Linux users are frequently the reason people use Windows. We all start somewhere.
The file is here https://github.com/KevinBiomech/Techcoin
The only difference is that there is now a file named techcoin-qt-linux.pro, so when you go to compile, the procedure is :
qmake techcoin-qt-linux.pro
make
If you started and got errors involving Mingw-48, this will solve the problem. Be sure to delete your Makefile before doing the above. (sudo rm Makefile).
To anyone who feels the urge to jump me for the level of detail, blow me. Linux users are frequently the reason people use Windows. We all start somewhere.
Thanks, I merged it into the official repo.
August 02, 2014, 02:27:17 AM
If anyone is having trouble compiling the qt wallet under linux, I have created a pull request that adds a modified .pro file that removes all mac and windows specific commands. It has not been approved or reviewed by the dev team as of yet, but I used it successfully.
The file is here https://github.com/KevinBiomech/Techcoin
The only difference is that there is now a file named techcoin-qt-linux.pro, so when you go to compile, the procedure is :
qmake techcoin-qt-linux.pro
make
If you started and got errors involving Mingw-48, this will solve the problem. Be sure to delete your Makefile before doing the above. (sudo rm Makefile).
To anyone who feels the urge to jump me for the level of detail, blow me. Linux users are frequently the reason people use Windows. We all start somewhere.
The file is here https://github.com/KevinBiomech/Techcoin
The only difference is that there is now a file named techcoin-qt-linux.pro, so when you go to compile, the procedure is :
qmake techcoin-qt-linux.pro
make
If you started and got errors involving Mingw-48, this will solve the problem. Be sure to delete your Makefile before doing the above. (sudo rm Makefile).
To anyone who feels the urge to jump me for the level of detail, blow me. Linux users are frequently the reason people use Windows. We all start somewhere.
August 01, 2014, 06:19:24 PM
deff one of the cleanest takeovers I've seen, wallet is moving along nicely... bids are slowly climbing on bittrex and so is the volume. the more people that hit the troll box's and twitter the sooner the word will get out that TECH is safe and the OG devs' mess has been fixed.
tweet tweet https://twitter.com/fonzerrellie/status/495326551756394496
tweet tweet https://twitter.com/fonzerrellie/status/495326551756394496
August 01, 2014, 12:17:02 PM
i am now holding 6848.77129167 tech. from my original 98 7tech. they will stay staking and i'l see wwhat happens with this coin. it has the potential to be big. my wallet address,TBa7yh9dXhxkuBC5SY7dNUrvyXRGbA7kua
Jump to: