Pages:
Author

Topic: [ANN] "Ten Times" (TENT) token sale (Read 260 times)

full member
Activity: 229
Merit: 134
February 08, 2018, 07:52:18 PM
#33
Interesting Concept. I thought of coming up with the same idea. Interesting to see that some one else have already done that.  Does the tokens get into my eth address automatically if i transfer the ETH to your smart contract address or you have to send it manually?

I have to send it manually. But automatic sending would be interesting and would eliminate complicated things like EtherDelta, at least for the initial distribution. Maybe this could be implemented with a smart contract as well?
newbie
Activity: 1
Merit: 0
February 08, 2018, 04:42:53 PM
#32
Interesting Concept. I thought of coming up with the same idea. Interesting to see that some one else have already done that.  Does the tokens get into my eth address automatically if i transfer the ETH to your smart contract address or you have to send it manually?
sr. member
Activity: 555
Merit: 251
February 08, 2018, 06:41:49 AM
#31
1,220.32 TENT was sold, so I've burned the rest of 900,000 TENT, by sending 898,779.68 TENT to the burn address 0x000000000000000000000000000000000000dEaD:

https://etherscan.io/tx/0xb9ee06d27f53c0c90d29672e02bfb8660c8b8b350ad30272efc90dd3f473928c


Good.. You are an honest man.. God Bless you.. Ill try to get you the logo asap
full member
Activity: 229
Merit: 134
February 08, 2018, 01:31:38 AM
#30
1,220.32 TENT was sold, so I've burned the rest of 900,000 TENT, by sending 898,779.68 TENT to the burn address 0x000000000000000000000000000000000000dEaD:

https://etherscan.io/tx/0xb9ee06d27f53c0c90d29672e02bfb8660c8b8b350ad30272efc90dd3f473928c
full member
Activity: 229
Merit: 134
February 05, 2018, 01:34:50 AM
#29
May I know what is the use of this token ? What will bring value to it ? I know you said that buying the token and hold it will bring value for it , But what is the value this toke offer to make me buy it in first place ! . There is already a lot of coins/tokens that offering similar idea ( Staking ) . Adding a use case for this token will be a good thing  Wink . Wish you luck .

You are right, there are tokens with staking, e.g. CLAM. But setup is complicated, you need to run the CLAM client all the time to stake, you need to load gigabytes of blockchain data, which even doesn't work most of the time, so you need an additional bootstrap file, you need to split your CLAMs to multiple accounts for optimal staking etc. (see the CLAM thread for all the problems). TENT token gives you the same, a very good interest rate, but without all the hassle. Just buy it once, sell it with compound interest whenever you want, and get rich Cool
full member
Activity: 229
Merit: 134
February 05, 2018, 01:30:12 AM
#28
thanks for your detailed clarification. I just sent you a pm.

You already have a logo and want to create an ICON image or you want to create a new one? If new one,  you should create a logo as well? What kind of logo you want?

A new logo would be nice as well, would pay additional 1000 TENT for it. The current logo is just a stock image.

The 28 x 28 pixel image is required for adding an icon to etherscan.
sr. member
Activity: 840
Merit: 266
February 04, 2018, 05:31:31 PM
#27
May I know what is the use of this token ? What will bring value to it ? I know you said that buying the token and hold it will bring value for it , But what is the value this toke offer to make me buy it in first place ! . There is already a lot of coins/tokens that offering similar idea ( Staking ) . Adding a use case for this token will be a good thing  Wink . Wish you luck .
sr. member
Activity: 555
Merit: 251
February 04, 2018, 05:16:14 PM
#26
thanks for your detailed clarification. I just sent you a pm.

You already have a logo and want to create an ICON image or you want to create a new one? If new one,  you should create a logo as well? What kind of logo you want?
full member
Activity: 229
Merit: 134
February 04, 2018, 09:12:00 AM
#25
Thanks for your detailed explanation. I just played with the numbers on the quick JSFiddle script. When i increase the q value from 867598 to 1867598, i see the interest rate is reducing.  So if that value is changed the interest will reduce right?

This is right. And the number can't be changed after the contract is deployed, so it can't be changed for TENT.

Quote
I don't see that you have given any ETH value for the token on the code.  On what basis you have said that the token value is 0.0001 eth?  Also when i see the contract address on etherscan.io it doesn't show any eth value for your token. But for few other tokens, i see the value is been shown on the etherscan.io

Can you please clarify

An ERC20 smart contract has no intrinsic value at start, see the definition of ERC20 tokens:

https://theethereum.wiki/w/index.php/ERC20_Token_Standard

There is no way to specify the ETH per TENT, other than with an initial trade offer as I did on EtherDelta. I guess Etherscan uses exchanges and https://coinmarketcap.com to calculate the exchange rates for tokens. I chose 0.0001 ETH because this looks like not too expensive, because then the total supply would be worth only 100 Ether, or about $100k. That's nothing compared to most other tokens, which currently even don't have any functionality, but just promises, like CRPT. My token already works, since last week. No need to pay a development team, offices etc. But of course would be nice, if I could get some money from selling it for my effort so far and there are already 2 other buyers. On the other hand, if it gets popular later, the value might rise more. But if the value doesn't drop by 1/10 per year, you still make profit when selling it.

I hope it will be more, only 3 days left until I burn the rest of the 900k tokens.

I still need a nice icon for the token, to add it to etherscan. I increase my offer: 1000 TENT (the real one on the main net) for an original 28 x 28 pixel PNG.
sr. member
Activity: 555
Merit: 251
February 04, 2018, 09:03:37 AM
#24
1) Is the interest paid life time or there is a limit for that? If the interest is paid life long, the demand will decrease right. Because you have a initial supply of 1 million tokens?  That 1 million token may become 11 million token in a year and it keeps increasing right? Please correct me if i am wrong and clarify me please.

2) How much gas (In eth value) is required for each transaction? I mean if i transfer the token to some one, how much i have to spend in ETH for each tranaction?

3) On what calculation you derive the compoundInterest? Is it not possible to reduce the total 10x to 5x or 3x annually?  If the constant number 867598 is reduced to 433284, will the interest get reduced to half? What made you offer 11x interest?

Ill reply with more questions on the next reply...

1) yes, the interest is paid life time. As calculated, it will overflow in about 60 years because of the high 10x increase each year, but until then, there is no problem and you will get more and more tokens each 16 seconds.

2) this depends on gas cost. For the 10 TENT test transfer, you can see it here:

https://etherscan.io/tx/0xb0e1f82b1ba606a4b4c5b0997b1f0cdb35f157529e16c39128db836d68c6ada2

So effectively about $4. But this was the suggested standard gas price, it might have worked with lower fee as well.

3) My goal was 10x interest. If you increase the number, the interest rate gets lower, because it is used in 1/x in the formula I described. If you use 2 million blocks and my JSFiddle script, you can try different numbers and see the compound interest for one year.

thanks for your response.  let me test run and come back to you soon. meanwhile please try to answer my other questions above..
full member
Activity: 229
Merit: 134
February 04, 2018, 09:00:47 AM
#23
1) Is the interest paid life time or there is a limit for that? If the interest is paid life long, the demand will decrease right. Because you have a initial supply of 1 million tokens?  That 1 million token may become 11 million token in a year and it keeps increasing right? Please correct me if i am wrong and clarify me please.

2) How much gas (In eth value) is required for each transaction? I mean if i transfer the token to some one, how much i have to spend in ETH for each tranaction?

3) On what calculation you derive the compoundInterest? Is it not possible to reduce the total 10x to 5x or 3x annually?  If the constant number 867598 is reduced to 433284, will the interest get reduced to half? What made you offer 11x interest?

Ill reply with more questions on the next reply...

1) yes, the interest is paid life time. As calculated, it will overflow in about 60 years because of the high 10x increase each year, but until then, there is no problem and you will get more and more tokens each 16 seconds.

2) this depends on gas cost. For the 10 TENT test transfer, you can see it here:

https://etherscan.io/tx/0xb0e1f82b1ba606a4b4c5b0997b1f0cdb35f157529e16c39128db836d68c6ada2

So effectively about $4. But this was the suggested standard gas price, it might have worked with lower fee as well.

3) My goal was 10x interest. If you increase the number, the interest rate gets lower, because it is used in 1/x in the formula I described. If you use 2 million blocks and my JSFiddle script, you can try different numbers and see the compound interest for one year.
sr. member
Activity: 555
Merit: 251
February 04, 2018, 08:42:37 AM
#22
I created the same contract on the Ropsten Testnet, I only changed the ticker symbol to TENTTest and added Test to the name and class name, so that it doesn't get confused with the main net token (I don't think I can use the exact same contract address from the mainnet on the testnet as well).

In MetaMask or MyEtherWallet, choose the Ropsten Testnet and add the token with these parameters:

Token Contract Address: 0x58e45f485743a7c792daeba93456eb9ba0f28cd2
Token Symbol: TENTTest
Decimals: 10

Here you can see the verified source code, same as the original, except for the name changes:

https://ropsten.etherscan.io/address/0x58e45f485743a7c792daeba93456eb9ba0f28cd2#code

Here you can get free ether for the Ropsten testnet, so that you can test transferring TENTTest tokens to other addresses, which costs ether gas fee:

http://faucet.ropsten.be:3001

PM or reply here with your Ropsten testnet ether address, if you want some TENTTest tokens on the testnet for free to play with it, and to verify if it works as I described it, if you can transfer it, if the interest changes are displayed in your wallet etc., and I'll send you 1000 tokens.

i sent you my ropsten address in PM
sr. member
Activity: 555
Merit: 251
February 04, 2018, 08:36:15 AM
#21
Where do you derive this percentage 0.000115 %?  I do not see that any where on your code? Why p=8 always? What does it do with the calculation? why 1=867598 always?

Your idea is really good and has to be appreciated? Even if you burn the 90 percent, you can use your 10 percent in future.  Does your 10 percent also gets interest for every 16 seconds?

The 0.000115 % is a result of my times 10 requirement each 2 million blocks. The formula for compound interest is (1+p%) ^ periods. If I want to have times 10, the formula looks like this: x^n=10. You can solve this by calculating x=10^(1/n) (or the n-th root of 10), which results in x = 1.00000115129 for n = 2000000. The percentage of this factor is (1 - x * 100) = 0.00000115129 * 100 = 0.000115129. I omitted the last digits.

p = 8 is the precision. For details see the article from where I got the function to calculate the exponentiation:

https://ethereum.stackexchange.com/questions/10425/is-there-any-efficient-way-to-compute-the-exponentiation-of-a-fraction-and-an-in

The problem with Solidity is, that you don't have float values and can't just write Math.pow(x, y), as you could do in JavaScript. The formula on stackexchange uses binomial expansion, which allows to calculate the exponentiation with very few steps with good approximation. The number p specifies the number of steps. Higher number of steps result in higher precision, but higher gas cost as well. You can find the mathematical background about binomial expansion here:

https://en.wikipedia.org/wiki/Binomial_theorem

Because of the required form "k * (1+1/q) ^ N" of the formula, I have to convert the 0.000115 % to q, so that 1/q is equal to 0.000115 %. This is the reason for the number 867598. If you calculate 1 / 867598, you get 0.0000011526. This is slightly different from the mathematically result, because I optimized q by hand so that the fracExp function nearly exactly results in times 10 for 2 million blocks (= about one year), my main goal.

I hacked a quick JSFiddle script for you to play with the numbers, and to see what effect the precision p has for the result:

https://jsfiddle.net/u5zgqqn3/embedded/result/

You can see the JavaScript source code here:

https://jsfiddle.net/u5zgqqn3/

It uses the BigNumber library to emulate the Solidity smart contract function fracExp.

Thanks for your detailed explanation. I just played with the numbers on the quick JSFiddle script. When i increase the q value from 867598 to 1867598, i see the interest rate is reducing.  So if that value is changed the interest will reduce right?

I don't see that you have given any ETH value for the token on the code.  On what basis you have said that the token value is 0.0001 eth?  Also when i see the contract address on etherscan.io it doesn't show any eth value for your token. But for few other tokens, i see the value is been shown on the etherscan.io

Can you please clarify
sr. member
Activity: 555
Merit: 251
February 04, 2018, 08:22:19 AM
#20
I understand that if i transfer 50 TENTS, i will still have 161.7 TENTS. But do i get the interest for 161.7 TENTS  for every 16 seconds again or i will get the interest for 211.7 tents?  Does the person who received 50 TENTS also will receive the interest for every 16 seconds?

Where is this condition written on your code exactly? I cannot read anything like that on your code?

Yes, after you transfer the 50 TENTs, you will get interest for the remaining 161.7 TENTs for each new block. The person who receives the 50 TENTs gets also interest for now his 50 TENTs every new block (= every 16 seconds). The concept is really simple compared to bigger periods like months or years, as you may know from banks Grin

In the code it is a bit more difficult to see:

https://etherscan.io/address/0xefd57b75cad5ac36ba102a88e34374a7bb68acf3#code

The reason is, that I can't add the interest each block, because this would cost way too much gas (= ether fee) and rounding errors would accumulate for small amounts over time. Instead I use lazy evaluation.

The important function here is updateBalance, starting from line 99. This records the start block for an address, if there is not already a start block, and then calculates the interest since the last start block and the current block. This interest is then added to the balance for this address and to the total supply. Whenever a transfer function is called (either "transfer" from line 115, or transferFrom from line 136), first the two involved balances are updated, so that the interest is actually paid for the last blocks. Then the transfer itself happens and because the startBlock map is updated with the current block as well, for the next transfer the next interest can be calculated.

To display the right amount all the time in web wallets etc., the "balanceOf" function uses the same compoundInterest function to calculate the current balance that will be used for the next transfer, but without actually changing the last saved balance from the last transfer call.

So the effect of this is that it looks like you always get your interest added for each block to your balance. But the required optimizations for low gas cost makes this a bit difficult to follow, unless you are a good Solidity programmer.

Sorry for the delayed response. Thank you for your clarifications. I still have the following questions:

1) Is the interest paid life time or there is a limit for that? If the interest is paid life long, the demand will decrease right. Because you have a initial supply of 1 million tokens?  That 1 million token may become 11 million token in a year and it keeps increasing right? Please correct me if i am wrong and clarify me please.

2) How much gas (In eth value) is required for each transaction? I mean if i transfer the token to some one, how much i have to spend in ETH for each tranaction?

3) On what calculation you derive the compoundInterest? Is it not possible to reduce the total 10x to 5x or 3x annually?  If the constant number 867598 is reduced to 433284, will the interest get reduced to half? What made you offer 11x interest?

Ill reply with more questions on the next reply...
full member
Activity: 229
Merit: 134
February 02, 2018, 06:40:17 AM
#19
I created the same contract on the Ropsten Testnet, I only changed the ticker symbol to TENTTest and added Test to the name and class name, so that it doesn't get confused with the main net token (I don't think I can use the exact same contract address from the mainnet on the testnet as well).

In MetaMask or MyEtherWallet, choose the Ropsten Testnet and add the token with these parameters:

Token Contract Address: 0x58e45f485743a7c792daeba93456eb9ba0f28cd2
Token Symbol: TENTTest
Decimals: 10

Here you can see the verified source code, same as the original, except for the name changes:

https://ropsten.etherscan.io/address/0x58e45f485743a7c792daeba93456eb9ba0f28cd2#code

Here you can get free ether for the Ropsten testnet, so that you can test transferring TENTTest tokens to other addresses, which costs ether gas fee:

http://faucet.ropsten.be:3001

PM or reply here with your Ropsten testnet ether address, if you want some TENTTest tokens on the testnet for free to play with it, and to verify if it works as I described it, if you can transfer it, if the interest changes are displayed in your wallet etc., and I'll send you 1000 tokens.
full member
Activity: 229
Merit: 134
February 02, 2018, 03:25:44 AM
#18
Where do you derive this percentage 0.000115 %?  I do not see that any where on your code? Why p=8 always? What does it do with the calculation? why 1=867598 always?

Your idea is really good and has to be appreciated? Even if you burn the 90 percent, you can use your 10 percent in future.  Does your 10 percent also gets interest for every 16 seconds?

The 0.000115 % is a result of my times 10 requirement each 2 million blocks. The formula for compound interest is (1+p%) ^ periods. If I want to have times 10, the formula looks like this: x^n=10. You can solve this by calculating x=10^(1/n) (or the n-th root of 10), which results in x = 1.00000115129 for n = 2000000. The percentage of this factor is (1 - x * 100) = 0.00000115129 * 100 = 0.000115129. I omitted the last digits.

p = 8 is the precision. For details see the article from where I got the function to calculate the exponentiation:

https://ethereum.stackexchange.com/questions/10425/is-there-any-efficient-way-to-compute-the-exponentiation-of-a-fraction-and-an-in

The problem with Solidity is, that you don't have float values and can't just write Math.pow(x, y), as you could do in JavaScript. The formula on stackexchange uses binomial expansion, which allows to calculate the exponentiation with very few steps with good approximation. The number p specifies the number of steps. Higher number of steps result in higher precision, but higher gas cost as well. You can find the mathematical background about binomial expansion here:

https://en.wikipedia.org/wiki/Binomial_theorem

Because of the required form "k * (1+1/q) ^ N" of the formula, I have to convert the 0.000115 % to q, so that 1/q is equal to 0.000115 %. This is the reason for the number 867598. If you calculate 1 / 867598, you get 0.0000011526. This is slightly different from the mathematically result, because I optimized q by hand so that the fracExp function nearly exactly results in times 10 for 2 million blocks (= about one year), my main goal.

I hacked a quick JSFiddle script for you to play with the numbers, and to see what effect the precision p has for the result:

https://jsfiddle.net/u5zgqqn3/embedded/result/

You can see the JavaScript source code here:

https://jsfiddle.net/u5zgqqn3/

It uses the BigNumber library to emulate the Solidity smart contract function fracExp.
full member
Activity: 229
Merit: 134
February 02, 2018, 03:04:51 AM
#17
I understand that if i transfer 50 TENTS, i will still have 161.7 TENTS. But do i get the interest for 161.7 TENTS  for every 16 seconds again or i will get the interest for 211.7 tents?  Does the person who received 50 TENTS also will receive the interest for every 16 seconds?

Where is this condition written on your code exactly? I cannot read anything like that on your code?

Yes, after you transfer the 50 TENTs, you will get interest for the remaining 161.7 TENTs for each new block. The person who receives the 50 TENTs gets also interest for now his 50 TENTs every new block (= every 16 seconds). The concept is really simple compared to bigger periods like months or years, as you may know from banks Grin

In the code it is a bit more difficult to see:

https://etherscan.io/address/0xefd57b75cad5ac36ba102a88e34374a7bb68acf3#code

The reason is, that I can't add the interest each block, because this would cost way too much gas (= ether fee) and rounding errors would accumulate for small amounts over time. Instead I use lazy evaluation.

The important function here is updateBalance, starting from line 99. This records the start block for an address, if there is not already a start block, and then calculates the interest since the last start block and the current block. This interest is then added to the balance for this address and to the total supply. Whenever a transfer function is called (either "transfer" from line 115, or transferFrom from line 136), first the two involved balances are updated, so that the interest is actually paid for the last blocks. Then the transfer itself happens and because the startBlock map is updated with the current block as well, for the next transfer the next interest can be calculated.

To display the right amount all the time in web wallets etc., the "balanceOf" function uses the same compoundInterest function to calculate the current balance that will be used for the next transfer, but without actually changing the last saved balance from the last transfer call.

So the effect of this is that it looks like you always get your interest added for each block to your balance. But the required optimizations for low gas cost makes this a bit difficult to follow, unless you are a good Solidity programmer.
sr. member
Activity: 555
Merit: 251
February 01, 2018, 09:08:30 PM
#16
For your example, if you buy 100 tokens today, you will have about 1.00000115 ^ 500,000 * 100 TENTs = 2.117 * 100 TENTs = 211.7 TENT after 3 months in your balance.

BTW, for an exact calculation you can use the contract functions:

https://etherscan.io/token/0xefd57b75cad5ac36ba102a88e34374a7bb68acf3?a=0x144e9bbf3dbc6ec9d3a84844d54416e80ac6fb7c#readContract

and click Query on the "facExp" function. The parameters:

k=TENT*10000000000, so e.g. 1000000000000 for this example
q=867598 (always the same value, this is the exponent, expressed as an inverse value)
n=number of blocks, so 500000 for this example
p=8 (always the same value, this is the calculation precision)

The result is 1779448097771. This is just the interest, in smallest TENT units. So it is 177.94. Add this to 100 and you get 277.94, even more than calculated. Try it with 2 million blocks, and you get 1000 for the interest, to which 100 will be added. So I guess I should have named it "Eleven Times" Grin

It even works for very small values. For example if you have just 10 TENT units, that's 0.000000001 TENT, you still get 0.0000000107 TENT at the end of the year, because the calculation is done with the number of blocks as an exponent parameter, not individually by adding the individual interests. And of course it works for 10k TENT or more, too.

And this is good, because if not many people buy it and I burn most of the 90% of the supply as I will do as promised, I can still use my 10% and try to list it at bigger and more classical exchanges.

Where do you derive this percentage 0.000115 %?  I do not see that any where on your code? Why p=8 always? What does it do with the calculation? why 1=867598 always?

Your idea is really good and has to be appreciated? Even if you burn the 90 percent, you can use your 10 percent in future.  Does your 10 percent also gets interest for every 16 seconds?
sr. member
Activity: 555
Merit: 251
February 01, 2018, 08:49:51 PM
#15
Thanks for your detailed explanation. Do you think people will buy the tokens from etherdelta?  Why can't you sell directly as an ICO? So all the unsold tokens will be burned after 7 days? If yes, even the 10 percent you hold will be burnt or it will be intact?  What exchanges you have on mind to list the tokens apart from etherdelta? I don't know how CLAM and WAVES are listed. May be they implemented this policy recently. 

I think exchanges like etherdelta are the future, because it is all smart contract based on the Ethereum network, so in theory more safe than conventional exchanges. But I will ask other exchanges as well.

Quote
I have another question.  Assume i have 100 tokens on my wallet and i am getting interest for 100 tokens.  After few days or months, if i sell 50 tokens, my balance will be only 50. On such case, i get the interest for 50 tokens or the initial 100 tokens?  If i sell the tokens, the recipient also gets the interest?

How long the interest will be paid?  Is there any cap for that? Is it life time?

You say that it gets multiplied by 10x. So if some one holds one token, after 12 months, he will have 10 tokens in his wallet?

Each block on the Ethereum network (so about each 16 seconds), 0.000115 % will get added. See this wallet, to which I transferred 10 TENT yesterday:

https://etherscan.io/token/0xefd57b75cad5ac36ba102a88e34374a7bb68acf3?a=0x144e9bbf3dbc6ec9d3a84844d54416e80ac6fb7c

Do a reload each 16 seconds, and you will see that it increases. Until the end of the year it has increased 2 million times, which is 10x (=1.00000115 ^ 2,000,000). But you can always sell and transfer it to another wallet earlier, with all the compound interest that it has so far. Compared to classical bank account, think of it as an interest period of 16 seconds instead of 1 year.

For your example, if you buy 100 tokens today, you will have about 1.00000115 ^ 500,000 * 100 TENTs = 2.117 * 100 TENTs = 211.7 TENT after 3 months in your balance. If you then sell 50 TENTs, the recipient will have 50 TENTs and you will have 161.7 TENTs.

I understand that if i transfer 50 TENTS, i will still have 161.7 TENTS. But do i get the interest for 161.7 TENTS  for every 16 seconds again or i will get the interest for 211.7 tents?  Does the person who received 50 TENTS also will receive the interest for every 16 seconds?

Where is this condition written on your code exactly? I cannot read anything like that on your code?
sr. member
Activity: 555
Merit: 251
February 01, 2018, 08:44:14 PM
#14
On what case the tokens are burnt? Please give more details about the burning of tokens.

Currently I own nearly all tokens. 90% are offered for sale on EtherDelta (you can buy a fraction of the offered tokens as well)

https://etherdelta.com/#0xefd57b75cad5ac36ba102a88e34374a7bb68acf3-ETH

The sale order expires in 7 days. I will then burn all unsold tokens of these 90%.

Quote
I had plans to start an own coin and i contact many exchanges including poloniex. Every one replied with the template saying "coins/tokens that are considered as security will not be listed". Any coin that assures interest to hold is considered as security. Even though this is the concept of proof of stake, these kind of coins/tokens are not accepted by many exchanges. 

On what idea you launched this token?  You have plans to list on which exchanges?

Well, that's strange, because technically CLAM and WAVES are then security, and both are listed at Bittrex. Maybe there is a limit? The stake profit is not very high, compared to the 10x increase per year of my token.

So far I didn't contact any exchange, but would be nice if it gets listed on a bigger exchange than EtherDelta. But I guess they wouldn't be interested, if nearly nobody except me has the token.

So, after 7 days one cannot buy the token?  Is it automatic? How do you burn the coins?  Do you burn manually?  I saw your code and there was nothing written about 10 x increase in a year?  On what basis the interest is added to the token and how much percentage for every 16 seconds?
Pages:
Jump to: