Author

Topic: [ANN] TIMEREUM (TME) VERSION 2.0: "ELIXIR" (ELIX) RELEASED (NEW THREAD) - page 111. (Read 126691 times)

full member
Activity: 184
Merit: 100
Would like to know when can receive my coin And online trading i excited

The contract has been deployed. If you are a Genesis address holder you can generate your coins now.
Here is the announcement post. There is no exchange for trading yet.  

https://bitcointalksearch.org/topic/m.20274186
legendary
Activity: 1904
Merit: 1063
0.1 TME = 5000 TME /an
   1 TME = 50 000 TME in ten years

Right ? or bad ?
legendary
Activity: 1750
Merit: 1004
Would like to know when can receive my coin And online trading i excited

Read posts above you have to add this token manually and than it to your parent address to create your 1st batch there. Instruction are given below how to add this toke into MEW. Remember make sure you have some ETH for gas.

Add Custom Token,

Address: 0xee22430595ae400a30ffba37883363fbf293e24e
Symbol:TME
Decimals: 18
newbie
Activity: 53
Merit: 0
Would like to know when can receive my coin And online trading i excited
newbie
Activity: 55
Merit: 0
@Noobquestions

First of all: do i have to trigger a batch right now to even start the mining process?

Triggering a batch is the mining process. You can trigger the production of ten batches.

What does people stop to make massive dumps every year when the maximum of their coins per batch is reached?

The batches do not reach maximum value after 1 year. They all take 10 years to be able to produce 5000 coins each, and the start reference time for all of those batches is when the contract was deployed. If you want maximum value, wait ten years from yesterday, and then deploy all your batches. Ideally, in ten years they'll be valuable enough that dumping them wouldn't be wise.

Batches have no memory of when the other batches were deployed. All a batch cares about is how long ago the contract was deployed.

If its strictly linear, i don't see why i would trigger a batch before it reaches 5000 coins.

You do earn something for not touching your batches, but you might need or want to use that currency. That's more of a life decision.

Earlier on in this thread, I mentioned that I believe getting a few coins circulating once this is trading on an exchange will be important. By deploying a few batches and getting coins circulating, the value of the uncirculated coins will likely go up.

I'm going to be writing up a document with numerical examples, graphs and probably tables detailing some scenarios of batch creation. I hope to have that document completed by early next week. I'll post it on the website and link it here when it's up.



Thanks for the detailed explanation.

But i am still not sure why the batches which have been triggered now by several users are giving 1250 Coins already as the start-date was only yesterday. Which graph lies beneath the mining? Will 1250 coins be always the minimum amount after mining and then its scaling linearly to 10 years?
So you could basically have 12500 coins right at the start vs approx. 31250 Coins after 5 years and full 50000 coins after 10 years? Depending on how good the currency develops, the growth over time is rather small. Not to be critizicing though!
legendary
Activity: 1372
Merit: 1001
Oh, I didn't know that is has been activated already and we can mine using both addresses now. I would also try to mine the first batch of tokens after sending some ETH in to those addresses. It is good to use how others already successfully performed the very first tokens.
full member
Activity: 322
Merit: 100
So how much ether do we need in the parent and child address to mine and transfer tokens?

You need 0.01 ETH to cover gas fee this minimum amount even transaction will take low fee but it will be nice to have some ETH there.

Ok thanks for the response!
legendary
Activity: 1540
Merit: 1002
So how much ether do we need in the parent and child address to mine and transfer tokens?

You need 0.01 ETH to cover gas fee this minimum amount even transaction will take low fee but it will be nice to have some ETH there.
hero member
Activity: 728
Merit: 500
on 2027 will be very interesting to see which would be the best moment to mine and sell TME.
It will not be a linear function and it will have a lot of variables...
hero member
Activity: 1134
Merit: 501
After the manual mining contract being functional now next step is to see these tokens being traded at some reputable and big exchange to now only gain value but also draw the attention of investors as well. I am looking forward to see which will be next steps and moves of developer to make it successful.
what you means for reputable? livecoin or coinexcahnge look great to me to start from, bittrex dont think would be possible , not now at least! maybe in the future who know what this project will bring us! in 2009 BTC was n ot tradable anywhare and now it cost lto money to buy it, maybe in a years Timereum could be great project too
legendary
Activity: 1610
Merit: 1004
After the manual mining contract being functional now next step is to see these tokens being traded at some reputable and big exchange to now only gain value but also draw the attention of investors as well. I am looking forward to see which will be next steps and moves of developer to make it successful.
hero member
Activity: 1134
Merit: 501

So now we all need to come up with a business that would support TME! Cheesy
that  is the most important think that dev would do for the project , keep safe your coin and goo luck with the project
member
Activity: 84
Merit: 10
@Noobquestions

First of all: do i have to trigger a batch right now to even start the mining process?

Triggering a batch is the mining process. You can trigger the production of ten batches.

What does people stop to make massive dumps every year when the maximum of their coins per batch is reached?

The batches do not reach maximum value after 1 year. They all take 10 years to be able to produce 5000 coins each, and the start reference time for all of those batches is when the contract was deployed. If you want maximum value, wait ten years from yesterday, and then deploy all your batches. Ideally, in ten years they'll be valuable enough that dumping them wouldn't be wise.

Batches have no memory of when the other batches were deployed. All a batch cares about is how long ago the contract was deployed.

If its strictly linear, i don't see why i would trigger a batch before it reaches 5000 coins.

You do earn something for not touching your batches, but you might need or want to use that currency. That's more of a life decision.

Earlier on in this thread, I mentioned that I believe getting a few coins circulating once this is trading on an exchange will be important. By deploying a few batches and getting coins circulating, the value of the uncirculated coins will likely go up.

I'm going to be writing up a document with numerical examples, graphs and probably tables detailing some scenarios of batch creation. I hope to have that document completed by early next week. I'll post it on the website and link it here when it's up.

full member
Activity: 184
Merit: 100
where can i see the contact source ?  i check here https://etherscan.io/token/0xee22430595ae400a30ffba37883363fbf293e24e#readContract

and read smart contact

there is  Unable to read contract information

I think because the contract is not verified.
I believe the Dev needs to post the source code to Ethscan to verify the contract.
Anyway, it is up to the Dev.
hero member
Activity: 840
Merit: 500
where can i see the contact source ?  i check here https://etherscan.io/token/0xee22430595ae400a30ffba37883363fbf293e24e#readContract

and read smart contact

there is  Unable to read contract information
full member
Activity: 630
Merit: 111
Apart from the manually-mining feature, what can I use this token for?

While we must wait and advertise the token. We are waiting for the developer to add the token to the exchanges.
member
Activity: 76
Merit: 10
Apart from the manually-mining feature, what can I use this token for?
legendary
Activity: 1904
Merit: 1063
I joined the AirDrop but still dont have my timereum, we must wait more or what i should do ?

Add token in mew :

Address: 0xee22430595ae400a30ffba37883363fbf293e24e
Symbol:TME  Decimals:
18
full member
Activity: 588
Merit: 111
I love the Cryptocurrency world
 I joined the AirDrop but still dont have my timereum, we must wait more or what i should do ?
sr. member
Activity: 448
Merit: 265
so we just have 10 bacth in our lifetime to generate token ? so if there 1254 per bacth max we could generate 12540 ?

No, if you let your address sit for a whole year without mining it, you can generate a maximum of 5,000 coins per year. So if you mine it once a year for 10 years you can generate a maximum of 50,000 coins.

Nope, if you wait until mining after 10 years you get 50k coins (10 x 5k). If you start mining now you get 1250 per batch, so if you hatch all your 10 batches now you get 12.5k coins.

So hatch 1 now and bring it to an exchange to trade it (when an exchange goes live) and continue to support the community while you hold your TME to be hatched in the future. If the community succeeds and Dev keeps on developing his coin we all generate value for TME and it will make it profitable for all of us.



Right, but If I were to wait to mine until my batch reaches 5,000 then I would get 50k, correct? Too bad theres no way to tell how many coins can be mined currently before we actually mine them. I wonder if the Dev can implement this.

its pretty interesting to wait till 10 years and comeback with 50k token , will 10 years later this coin became 0,1 like eth ? hahaha and all of us will be rich as hell , see you in 10 years again , good luck everyone who support this project and dev for build this project ....
Jump to: