sapphire dual-x r9 280x - 4.45 MH
"intensity" : "19",
"worksize" : "256",
"lookup-gap" : "2",
"algorithm" : "fresh",
"gpu-threads" : "2",
"thread-concurrency" : "8192",
"gpu-engine" : "1095",
"gpu-memclock" : "1500"
Topic: [ANN] UPCOIN - [UP] Fresh algo, PoW+PoS, Encrypted Messaging - EXCHANGE! - page 3. (Read 25894 times)
October 19, 2014, 04:49:54 AM
October 19, 2014, 04:33:59 AM
how much hashrate you guys got from 280x?
About 4.4 MH
you have a bad GPU
send it to me
which settings and which miner are you using ?
October 19, 2014, 02:18:26 AM
Thanks for your interest and mining guys!
Also thanks a lot to x11-x13-pool.org to have setup a block explorer! Great!
Here it is un updated list of Pools.
Enjoy UP!
POOLS
https://up.suprnova.cc
http://up.coin-miners.info/
http://x11-x13-pool.org/upcoin
EXPLORER
http://explorer.x11-x13-pool.org:3005/
Also thanks a lot to x11-x13-pool.org to have setup a block explorer! Great!
Here it is un updated list of Pools.
Enjoy UP!
POOLS
https://up.suprnova.cc
http://up.coin-miners.info/
http://x11-x13-pool.org/upcoin
EXPLORER
http://explorer.x11-x13-pool.org:3005/
October 19, 2014, 01:54:24 AM
how much hashrate you guys got from 280x?
About 4.4 MH
October 18, 2014, 11:34:04 PM
how much hashrate you guys got from 280x?
About 4.4 MH
October 18, 2014, 10:16:03 PM
how much hashrate you guys got from 280x?
October 18, 2014, 10:14:51 PM
Encrypted Messaging is very popular now,but the first one is down 
October 18, 2014, 09:41:58 PM
upcoin https://bitcointalksearch.org/topic/ann-upcoin-up-fresh-algo-powpos-encrypted-messaging-exchange-827547
Heritage: NM(nightmare?)
Problems:
* MODERATE: genesis seed is not a news event
Notes:
does synccheckpoints and alerts work with compressed private keys?
good fair launch with good difficulty curve
Watermarks: uint64_t, pos, smsg
Heritage: NM(nightmare?)
Problems:
* MODERATE: genesis seed is not a news event
Notes:
does synccheckpoints and alerts work with compressed private keys?
good fair launch with good difficulty curve
Watermarks: uint64_t, pos, smsg
October 18, 2014, 08:53:23 PM
Can be exchanged??
October 18, 2014, 06:27:52 PM
is there a fresh ccminer (cudaminer) for computer 2.1 graphic cards? I've gt540m...
October 18, 2014, 06:23:29 PM
That's a Compute 2.0 gpu and I believe that ccminer with fresh algo only supports cards with Compute 3.0 or higher. I might be wrong as there might be a ccminer compiled for Compute 2.0 somewhere out there.
Given that it actually does some work (stratum detected new block, kh/s display, etc.), that does not seem to be the problem. Surely if the problem was compute version, it would crash with something like "illegal instruction".
Check this https://bitcointalk.org/index.php?topic=670939.msg7737536;topicseen#msg7737536
If you want to check what compute have your gpu check this https://developer.nvidia.com/cuda-gpus
October 18, 2014, 06:16:57 PM
That's a Compute 2.0 gpu and I believe that ccminer with fresh algo only supports cards with Compute 3.0 or higher. I might be wrong as there might be a ccminer compiled for Compute 2.0 somewhere out there.
Given that it actually does some work (stratum detected new block, kh/s display, etc.), that does not seem to be the problem. Surely if the problem was compute version, it would crash with something like "illegal instruction".
Check this https://bitcointalk.org/index.php?topic=670939.msg7737536;topicseen#msg7737536
October 18, 2014, 06:10:37 PM
That's a Compute 2.0 gpu and I believe that ccminer with fresh algo only supports cards with Compute 3.0 or higher. I might be wrong as there might be a ccminer compiled for Compute 2.0 somewhere out there.
Given that it actually does some work (stratum detected new block, kh/s display, etc.), that does not seem to be the problem. Surely if the problem was compute version, it would crash with something like "illegal instruction".
Check this https://bitcointalk.org/index.php?topic=670939.msg7737536;topicseen#msg7737536
October 18, 2014, 06:07:04 PM
That's a Compute 2.0 gpu and I believe that ccminer with fresh algo only supports cards with Compute 3.0 or higher. I might be wrong as there might be a ccminer compiled for Compute 2.0 somewhere out there.
Given that it actually does some work (stratum detected new block, kh/s display, etc.), that does not seem to be the problem. Surely if the problem was compute version, it would crash with something like "illegal instruction".
October 18, 2014, 06:06:28 PM
I'm missing ninja launches
Most profitable coin launches ever.
Most profitable coin launches ever.
October 18, 2014, 06:02:02 PM
My worker is still not recognized as active on suprnova using ccminer. I have -f 256 and ccminer receives work. My sharerate and hashrate are both 0.
Do you have accepted shares ? Check in Your Account/Workers tab if the worker is active there
No.
Is the miner considered inactive until at least 1 share is accepted?
I've been mining for about half an hour with -f 256, I would have expected to have at least one accepted share by now.
post your miner command so we can see
./ccminer -a fresh -o stratum+tcp://up.suprnova.cc:7728 -O [username].[workername]:[password] -f 256
With the tokens replaced appropriately. Still nothing after almost 1 hour.
What gpu do you have?
GTX 570
That's a Compute 2.0 gpu and I believe that ccminer with fresh algo only supports cards with Compute 3.0 or higher. I might be wrong as there might be a ccminer compiled for Compute 2.0 somewhere out there.
October 18, 2014, 05:59:07 PM
My worker is still not recognized as active on suprnova using ccminer. I have -f 256 and ccminer receives work. My sharerate and hashrate are both 0.
Do you have accepted shares ? Check in Your Account/Workers tab if the worker is active there
No.
Is the miner considered inactive until at least 1 share is accepted?
I've been mining for about half an hour with -f 256, I would have expected to have at least one accepted share by now.
post your miner command so we can see
./ccminer -a fresh -o stratum+tcp://up.suprnova.cc:7728 -O [username].[workername]:[password] -f 256
With the tokens replaced appropriately. Still nothing after almost 1 hour.
What gpu do you have?
GTX 570
October 18, 2014, 05:52:44 PM
My worker is still not recognized as active on suprnova using ccminer. I have -f 256 and ccminer receives work. My sharerate and hashrate are both 0.
Do you have accepted shares ? Check in Your Account/Workers tab if the worker is active there
No.
Is the miner considered inactive until at least 1 share is accepted?
I've been mining for about half an hour with -f 256, I would have expected to have at least one accepted share by now.
post your miner command so we can see
./ccminer -a fresh -o stratum+tcp://up.suprnova.cc:7728 -O [username].[workername]:[password] -f 256
With the tokens replaced appropriately. Still nothing after almost 1 hour.
What gpu do you have?
October 18, 2014, 05:43:17 PM
Mine, working : ccminer.exe -a fresh -o stratum+tcp://up.suprnova.cc:7728 -u login.worker -p pass --diff 256
October 18, 2014, 05:25:52 PM
My worker is still not recognized as active on suprnova using ccminer. I have -f 256 and ccminer receives work. My sharerate and hashrate are both 0.
Do you have accepted shares ? Check in Your Account/Workers tab if the worker is active there
No.
Is the miner considered inactive until at least 1 share is accepted?
I've been mining for about half an hour with -f 256, I would have expected to have at least one accepted share by now.
post your miner command so we can see
./ccminer -a fresh -o stratum+tcp://up.suprnova.cc:7728 -O [username].[workername]:[password] -f 256
With the tokens replaced appropriately. Still nothing after almost 1 hour.
Jump to: