Author

Topic: [ANN] [USDe] Unitary Status Dollar eCoin $$ IMPROVED Halving | KGW Fix Update!!! - page 422. (Read 578463 times)

full member
Activity: 196
Merit: 100
Cryptonankee - your trusted USDe servant
pls when will the diff change? im mining it for almost 3 days and difficulity seems same?! not like i was sad about it ..Cheesy but its becoming more and more strange.. or is it because there is still same net hashrate ? around 300mhash?

Diff retarget will be fixed in upcoming release it is currently set to happen every 1200 blocks instead of 120.  That is one of the fixes coming.
member
Activity: 112
Merit: 10
pls when will the diff change? im mining it for almost 3 days and difficulity seems same?! not like i was sad about it ..Cheesy but its becoming more and more strange.. or is it because there is still same net hashrate ? around 300mhash?
member
Activity: 112
Merit: 10
i'm in the uk and i have mined over 10k in about 15hrs on 500khs
full member
Activity: 126
Merit: 100
To DEVs

Hi guys - hope you are enjoying the ride (remember to keep any limbs you wish to retain inside the car at all times)    Shocked.

Nodes - I think you have too few, and poorly distributed.

I think that the high apparent orphan problem in at least the early hours is a symptom, and the fast blocks and low difficulties are exacerbating the issue.

Think about it in non-rocket scientist terms.  If your block time is 120 secs, 100 extra ms here or there is a relative low percentage.  Not so when blocks are seconds.  When a new block is reported this promulgates to the nodes, and then by LongPoll outwards, then mining stops until reception of the next block.  Even in processing terms, if your latency is poor, your miners are marking time longer.  Things get more expensive when it is about presenting solutions, because the window for multiple acceptances is wider, and thus there are more orphans.

I get pings of between 270 and 370ms to your four nodes, and haven't seen a confirmed block (numerous unpaid orphans, though).

One litmus test is to see how many non-US users are mining successfully.  Anybody?

How about the ping times to your nodes?



Are we talking solomining here?
newbie
Activity: 28
Merit: 0
To DEVs

Hi guys - hope you are enjoying the ride (remember to keep any limbs you wish to retain inside the car at all times)    Shocked.

Nodes - I think you have too few, and poorly distributed.

I think that the high apparent orphan problem in at least the early hours is a symptom, and the fast blocks and low difficulties are exacerbating the issue.

Think about it in non-rocket scientist terms.  If your block time is 120 secs, 100 extra ms here or there is a relative low percentage.  Not so when blocks are seconds.  When a new block is reported this promulgates to the nodes, and then by LongPoll outwards, then mining stops until reception of the next block.  Even in processing terms, if your latency is poor, your miners are marking time longer.  Things get more expensive when it is about presenting solutions, because the window for multiple acceptances is wider, and thus there are more orphans.

I get pings of between 270 and 370ms to your four nodes, and haven't seen a confirmed block (numerous unpaid orphans, though).

One litmus test is to see how many non-US users are mining successfully.  Anybody?

How about the ping times to your nodes?

full member
Activity: 126
Merit: 100
A good guesstimate (with not much luck factored in), a R9 280x running optimally ~750kh/s from my experience, should mint around 8-12$ a day in revenue, it can produce a bit more with lucky solomining or beeing an early adopter of the latest hype coin. This is experience based on running a 7 gpu rig. For instance i gained 0.3 btc in litte over an hour when mooncoin launched, and something very like that on dogecoin launch.
But a a steady and reliable 8$ pr day pr gpu revenue has been very dependable for as long as i have ran the rig.
sr. member
Activity: 266
Merit: 250
Hello Everyone!

It's going to be a good day today! Cheesy

Good morning to you, too!
full member
Activity: 266
Merit: 100
Crypto Enthusiast
does anyone know what hashpower could I have with a R9 280x, and what could be the settings for cgminer?

It depends on your version.

I currently have r280x Sapphire Dual OC: http://www.sapphiretech.com/presentation/product/product_index.aspx?pid=2022&lid=1

And it gives me 728Kh/s:

Quote
-g 2 -w256 -I 13 --thread-concurrency 11200 --temp-target 75 --gpu-engine 1035 --gpu-memclock 1500 --auto-fan --shaders 2048 --gpu-powertune -20

I'm a newbie in mining, will you get your investment back in 3 months? and on a motherboard can I place 3 of them? would that work?

Yes I bought with credit card and I hope to get back my investment in 50 days.

You can place even 4 cards to one motherboard by using risers.

And many days ago you started mining? what's your income so far, if you wanna tell
full member
Activity: 196
Merit: 100
Cryptonankee - your trusted USDe servant
Hello Everyone!

It's going to be a good day today! Cheesy
sr. member
Activity: 672
Merit: 273
does anyone know what hashpower could I have with a R9 280x, and what could be the settings for cgminer?

It depends on your version.

I currently have r280x Sapphire Dual OC: http://www.sapphiretech.com/presentation/product/product_index.aspx?pid=2022&lid=1

And it gives me 728Kh/s:

Quote
-g 2 -w256 -I 13 --thread-concurrency 11200 --temp-target 75 --gpu-engine 1035 --gpu-memclock 1500 --auto-fan --shaders 2048 --gpu-powertune -20

I'm a newbie in mining, will you get your investment back in 3 months? and on a motherboard can I place 3 of them? would that work?

Yes I bought with credit card and I hope to get back my investment in 50 days.

You can place even 4 cards to one motherboard by using risers.
full member
Activity: 266
Merit: 100
Crypto Enthusiast
does anyone know what hashpower could I have with a R9 280x, and what could be the settings for cgminer?

It depends on your version.

I currently have r280x Sapphire Dual OC: http://www.sapphiretech.com/presentation/product/product_index.aspx?pid=2022&lid=1

And it gives me 728Kh/s:

Quote
-g 2 -w256 -I 13 --thread-concurrency 11200 --temp-target 75 --gpu-engine 1035 --gpu-memclock 1500 --auto-fan --shaders 2048 --gpu-powertune -20

I'm a newbie in mining, will you get your investment back in 3 months? and on a motherboard can I place 3 of them? would that work?
full member
Activity: 126
Merit: 100
R9 280x should be getting 750 kh/s all day. Tweak around with your settings:

-g 2 -w 256 -I 13 --thread-concurrency=8192 --gpu-engine=1050 --gpu-memclock=1500

the gpu engine (overclock) setting. Try it adjusting it from 1020-1080 somewhere and find a spot that you are comfortable with. Taking temperatures into consideration, depends a lot on your rig build and cooling capacity. If you start getting ANY number in the HW:0 column (any number other than 0) you have gone too far and should either get better cooling or slow down. I find that the sweet spot for my gpus are at the 1050 mark, these are Sapphire dual-x cards.

I see no reason to dabble with the intencity whatsoever, 13 has without a doubt been the best. -w 256 (worksize) also is the optimum. Haven't dabbled much with the memclock setting. Also thread concurrency 8192 seems to be the best from reading what others are using on hardware comparison and from own mining experience.
legendary
Activity: 1120
Merit: 1000
does anyone know what hashpower could I have with a R9 280x, and what could be the settings for cgminer?

If you tweak your gpu well you will get about 750 kh/s.

and how do you tweak that? You can just setup our script file and that is it? Working with the -I option.
sr. member
Activity: 266
Merit: 250
does anyone know what hashpower could I have with a R9 280x, and what could be the settings for cgminer?

If you tweak your gpu well you will get about 750 kh/s.
sr. member
Activity: 292
Merit: 250
does anyone know what hashpower could I have with a R9 280x, and what could be the settings for cgminer?

Here is a link to the hardware comparison page and it also has the settings used to get the hashes shown.

https://litecoin.info/Mining_hardware_comparison


sr. member
Activity: 672
Merit: 273
does anyone know what hashpower could I have with a R9 280x, and what could be the settings for cgminer?

It depends on your version.

I currently have r280x Sapphire Dual OC: http://www.sapphiretech.com/presentation/product/product_index.aspx?pid=2022&lid=1

And it gives me 728Kh/s:

Quote
-g 2 -w256 -I 13 --thread-concurrency 11200 --temp-target 75 --gpu-engine 1035 --gpu-memclock 1500 --auto-fan --shaders 2048 --gpu-powertune -20
full member
Activity: 266
Merit: 100
Crypto Enthusiast
does anyone know what hashpower could I have with a R9 280x, and what could be the settings for cgminer?
full member
Activity: 266
Merit: 100
Crypto Enthusiast
sr. member
Activity: 672
Merit: 273
sr. member
Activity: 322
Merit: 250
what's the reasonable price for 10k usde?

thanks  

i want buy some usde!

0.1 btc probably but you can take them at about 1/10 of that from a seasoned dumper
Jump to: