Topic: [ANN] [VIRAL] [Trading Live - Bittrex + C-CEX] Advanced Development - page 109. (Read 276112 times)
May 16, 2015, 02:10:14 PM
only 4 more BTC to cross 20K on trex
May 16, 2015, 02:00:02 PM
Boom goes Viral
1st page by 1hour.. 2nd hour first place, Rocket lock and loaded.
1st page by 1hour.. 2nd hour first place, Rocket lock and loaded.
May 16, 2015, 01:46:24 PM
We are 10 days early on this, hope you guys will be happy!
Our MAC wallet is ready for download! This is one of the first MAC wallets with OAUTH webkit capabilities. You can download the OSX 10.10 compatible wallet here!
Our MAC wallet is ready for download! This is one of the first MAC wallets with OAUTH webkit capabilities. You can download the OSX 10.10 compatible wallet here!
Thanks
and please update the OP and also edit that title "Coming to Bittrex"
May 16, 2015, 01:44:42 PM
grats dev, nicely done!
May 16, 2015, 01:39:06 PM
We are 10 days early on this, hope you guys will be happy!
Our MAC wallet is ready for download! This is one of the first MAC wallets with OAUTH webkit capabilities. You can download the OSX 10.10 compatible wallet here! https://github.com/viraldev/viral/releases/download/v0.9.3.0/osx-Viral-Qt-v0.9.3.dmg
Our MAC wallet is ready for download! This is one of the first MAC wallets with OAUTH webkit capabilities. You can download the OSX 10.10 compatible wallet here! https://github.com/viraldev/viral/releases/download/v0.9.3.0/osx-Viral-Qt-v0.9.3.dmg
May 16, 2015, 01:32:15 PM
In trex buy order is of 15 btc and sell order is of 14 btc, for first time on trex buy order surpasses that on sell side.we will cross 30K on trex today
Good job guys
May 16, 2015, 01:31:35 PM
In trex buy order is of 15 btc and sell order is of 14 btc, for first time on trex buy order surpasses that on sell side.we will cross 30K on trex today
so far it's all fake trading on trex
May 16, 2015, 01:27:11 PM
In trex buy order is of 15 btc and sell order is of 14 btc, for first time on trex buy order surpasses that on sell side.we will cross 30K on trex today
May 16, 2015, 01:17:07 PM
Its Viral time.. Showdown
1st page trex within one hour.. Rock on
1st page trex within one hour.. Rock on
May 16, 2015, 01:06:27 PM
good news ,now viral is listed on trex:
https://www.bittrex.com/Market/Index?MarketName=BTC-VIRAL
get your cheap coin from ccex now, as after few hours it wouldn't be possible to buy viral below 15K.
already min sell order posted in trex is above 15K.
https://www.bittrex.com/Market/Index?MarketName=BTC-VIRAL
get your cheap coin from ccex now, as after few hours it wouldn't be possible to buy viral below 15K.
already min sell order posted in trex is above 15K.
May 16, 2015, 01:04:20 PM
Awesome news. We are moving on up to the East-Side!
May 16, 2015, 01:02:50 PM
We've finally been added to Bittrex! Trading is now live so get ready to go VIRAL!
Here is one of the owner's posts to announce on Twitter https://twitter.com/richiela/status/599630592871796736
The start to a crazy weekend!!
Here is one of the owner's posts to announce on Twitter https://twitter.com/richiela/status/599630592871796736
The start to a crazy weekend!!
May 16, 2015, 01:01:47 PM
market cap: $140,000
May 16, 2015, 12:54:30 PM
Boooom!
Now this coin can grow naturally!
Now this coin can grow naturally!
May 16, 2015, 12:52:19 PM
nice! anyway, someone should let them know it is just viral, not viralcoin
May 16, 2015, 12:47:38 PM
May 16, 2015, 12:47:21 PM
Viral is on Bittrex https://bittrex.com/Market/Index?MarketName=BTC-VIRAL
May 16, 2015, 11:38:09 AM
Here is the Raspberry Pi wallet for v0.9.1.0-unk - for both the Qt and headless daemon (command line) - UPNP enabled.
Important:
1) Always backup your wallet.dat first before you do anything
2) The wallet was built on a Raspberry Pi2 (ARM7) running Raspbian Wheezy.
3) Installation directory where the binaries are installed is ~/opt/viral or /home/pi/opt/viral
4) All that is needed is to execute the command below on your Pi in a terminal window and afterwards you need to click on the Viral icon on your desktop to launch the Qt wallet or go to the directory with the wallets and run the daemon (virald) with the options you want at the command prompt or in a terminal window
5) An Internet connection is required for the installation
6) A bootstrap.dat is used to fast track the blockchain sync - up to block 7847
7) The bootstrap.dat also works for Windows wallets. For your convenience I have included a direct link below to an untarred bootstrap.dat to make it easy for the Windows users. Windows users just have to copy the bootstrap.dat file into their c\users\yourusername\AppData\Roaming\viral folder and run the Win client again
8.) You need at least an 8GB memory card
9) The installation itself takes about 30-45min on an out-of-the-box Pi
10) You cannot just download the binaries, you have to run the script to get the dependencies as well else it will not run
11) The installation script does not enable the UFW firewall by default. If you want to enable it, uncomment the UFW lines in the script and add the port you want open and run it again or enable it manually by running the UFW commands as in the script with the correct port numbers.
12) Always verify the checksums when you download files to make sure it was downloaded ok. To verify the checksums on your Pi, go to the ~/opt/viral folder and execute sha256sum and md5sum and compare the values with the values in the checksums.txt file
Users will be familiar with the Qt wallet as it works like the Windows one. Instructions to use the headless command line daemon wallet:
1) Since you the installation script created a viral.conf file with the startup settings in it, go to the folder with the binaries ~/opt/viral and enter ./virald in a terminal window to start the server
2) After the blockchain has been imported you can enter the normal wallet commands that you would as in a Windows debug console preceded with ./virald
3) Remember to always make a backup of your wallet.dat file before you do anything like encrypting it
4) To encrypt your wallet run the command ./virald encryptwallet
5) To stake with your wallet run the command ./virald walletpassphrase 99999999 true
Let me know about any issues that you may encounter.
To kickstart the installation execute the following command at the command prompt or in a terminal window on your Pi:
Direct links:
Link to installation script
Link to viral-qt
Link to virald
Link to bootstrap.dat up to block 7847
Link to bootstrap.dat up to block 7847, untarred for the Win users
Link to checksums.txt
If you like this, you are welcome to donate Viral to VThqxinccshK3piywdmP6TQXLc2t1VQ69X
Important:
1) Always backup your wallet.dat first before you do anything
2) The wallet was built on a Raspberry Pi2 (ARM7) running Raspbian Wheezy.
3) Installation directory where the binaries are installed is ~/opt/viral or /home/pi/opt/viral
4) All that is needed is to execute the command below on your Pi in a terminal window and afterwards you need to click on the Viral icon on your desktop to launch the Qt wallet or go to the directory with the wallets and run the daemon (virald) with the options you want at the command prompt or in a terminal window
5) An Internet connection is required for the installation
6) A bootstrap.dat is used to fast track the blockchain sync - up to block 7847
7) The bootstrap.dat also works for Windows wallets. For your convenience I have included a direct link below to an untarred bootstrap.dat to make it easy for the Windows users. Windows users just have to copy the bootstrap.dat file into their c\users\yourusername\AppData\Roaming\viral folder and run the Win client again
8.) You need at least an 8GB memory card
9) The installation itself takes about 30-45min on an out-of-the-box Pi
10) You cannot just download the binaries, you have to run the script to get the dependencies as well else it will not run
11) The installation script does not enable the UFW firewall by default. If you want to enable it, uncomment the UFW lines in the script and add the port you want open and run it again or enable it manually by running the UFW commands as in the script with the correct port numbers.
12) Always verify the checksums when you download files to make sure it was downloaded ok. To verify the checksums on your Pi, go to the ~/opt/viral folder and execute sha256sum
Users will be familiar with the Qt wallet as it works like the Windows one. Instructions to use the headless command line daemon wallet:
1) Since you the installation script created a viral.conf file with the startup settings in it, go to the folder with the binaries ~/opt/viral and enter ./virald in a terminal window to start the server
2) After the blockchain has been imported you can enter the normal wallet commands that you would as in a Windows debug console preceded with ./virald
3) Remember to always make a backup of your wallet.dat file before you do anything like encrypting it
4) To encrypt your wallet run the command ./virald encryptwallet
5) To stake with your wallet run the command ./virald walletpassphrase
Let me know about any issues that you may encounter.
To kickstart the installation execute the following command at the command prompt or in a terminal window on your Pi:
Code:
wget https://bitbucket.org/jc12345/viral/downloads/viral_installation_pi.sh && chmod +x viral_installation_pi.sh && ./viral_installation_pi.sh && rm -f viral_installation_pi.sh
Direct links:
Link to installation script
Link to viral-qt
Link to virald
Link to bootstrap.dat up to block 7847
Link to bootstrap.dat up to block 7847, untarred for the Win users
Link to checksums.txt
If you like this, you are welcome to donate Viral to VThqxinccshK3piywdmP6TQXLc2t1VQ69X
I would recommend that everyone wait on word from Adam before downloading this wallet.
May 16, 2015, 10:18:07 AM
Here is the Raspberry Pi wallet for v0.9.1.0-unk - for both the Qt and headless daemon (command line) - UPNP enabled.
Important:
1) Always backup your wallet.dat first before you do anything
2) The wallet was built on a Raspberry Pi2 (ARM7) running Raspbian Wheezy.
3) Installation directory where the binaries are installed is ~/opt/viral or /home/pi/opt/viral
4) All that is needed is to execute the command below on your Pi in a terminal window and afterwards you need to click on the Viral icon on your desktop to launch the Qt wallet or go to the directory with the wallets and run the daemon (virald) with the options you want at the command prompt or in a terminal window
5) An Internet connection is required for the installation
6) A bootstrap.dat is used to fast track the blockchain sync - up to block 7847
7) The bootstrap.dat also works for Windows wallets. For your convenience I have included a direct link below to an untarred bootstrap.dat to make it easy for the Windows users. Windows users just have to copy the bootstrap.dat file into their c\users\yourusername\AppData\Roaming\viral folder and run the Win client again
8.) You need at least an 8GB memory card
9) The installation itself takes about 30-45min on an out-of-the-box Pi
10) You cannot just download the binaries, you have to run the script to get the dependencies as well else it will not run
11) The installation script does not enable the UFW firewall by default. If you want to enable it, uncomment the UFW lines in the script and add the port you want open and run it again or enable it manually by running the UFW commands as in the script with the correct port numbers.
12) Always verify the checksums when you download files to make sure it was downloaded ok. To verify the checksums on your Pi, go to the ~/opt/viral folder and execute sha256sum and md5sum and compare the values with the values in the checksums.txt file
Users will be familiar with the Qt wallet as it works like the Windows one. Instructions to use the headless command line daemon wallet:
1) Since you the installation script created a viral.conf file with the startup settings in it, go to the folder with the binaries ~/opt/viral and enter ./virald in a terminal window to start the server
2) After the blockchain has been imported you can enter the normal wallet commands that you would as in a Windows debug console preceded with ./virald
3) Remember to always make a backup of your wallet.dat file before you do anything like encrypting it
4) To encrypt your wallet run the command ./virald encryptwallet
5) To stake with your wallet run the command ./virald walletpassphrase 99999999 true
Let me know about any issues that you may encounter.
To kickstart the installation execute the following command at the command prompt or in a terminal window on your Pi:
Direct links:
Link to installation script
Link to viral-qt
Link to virald
Link to bootstrap.dat up to block 7847
Link to bootstrap.dat up to block 7847, untarred for the Win users
Link to checksums.txt
If you like this, you are welcome to donate Viral to VThqxinccshK3piywdmP6TQXLc2t1VQ69X
Important:
1) Always backup your wallet.dat first before you do anything
2) The wallet was built on a Raspberry Pi2 (ARM7) running Raspbian Wheezy.
3) Installation directory where the binaries are installed is ~/opt/viral or /home/pi/opt/viral
4) All that is needed is to execute the command below on your Pi in a terminal window and afterwards you need to click on the Viral icon on your desktop to launch the Qt wallet or go to the directory with the wallets and run the daemon (virald) with the options you want at the command prompt or in a terminal window
5) An Internet connection is required for the installation
6) A bootstrap.dat is used to fast track the blockchain sync - up to block 7847
7) The bootstrap.dat also works for Windows wallets. For your convenience I have included a direct link below to an untarred bootstrap.dat to make it easy for the Windows users. Windows users just have to copy the bootstrap.dat file into their c\users\yourusername\AppData\Roaming\viral folder and run the Win client again
8.) You need at least an 8GB memory card
9) The installation itself takes about 30-45min on an out-of-the-box Pi
10) You cannot just download the binaries, you have to run the script to get the dependencies as well else it will not run
11) The installation script does not enable the UFW firewall by default. If you want to enable it, uncomment the UFW lines in the script and add the port you want open and run it again or enable it manually by running the UFW commands as in the script with the correct port numbers.
12) Always verify the checksums when you download files to make sure it was downloaded ok. To verify the checksums on your Pi, go to the ~/opt/viral folder and execute sha256sum
Users will be familiar with the Qt wallet as it works like the Windows one. Instructions to use the headless command line daemon wallet:
1) Since you the installation script created a viral.conf file with the startup settings in it, go to the folder with the binaries ~/opt/viral and enter ./virald in a terminal window to start the server
2) After the blockchain has been imported you can enter the normal wallet commands that you would as in a Windows debug console preceded with ./virald
3) Remember to always make a backup of your wallet.dat file before you do anything like encrypting it
4) To encrypt your wallet run the command ./virald encryptwallet
5) To stake with your wallet run the command ./virald walletpassphrase
Let me know about any issues that you may encounter.
To kickstart the installation execute the following command at the command prompt or in a terminal window on your Pi:
Code:
wget https://bitbucket.org/jc12345/viral/downloads/viral_installation_pi.sh && chmod +x viral_installation_pi.sh && ./viral_installation_pi.sh && rm -f viral_installation_pi.sh
Direct links:
Link to installation script
Link to viral-qt
Link to virald
Link to bootstrap.dat up to block 7847
Link to bootstrap.dat up to block 7847, untarred for the Win users
Link to checksums.txt
If you like this, you are welcome to donate Viral to VThqxinccshK3piywdmP6TQXLc2t1VQ69X
May 16, 2015, 08:43:21 AM
bought 20k today.. will be intresting to see this G0 Real Viral..
keep it transparent very inportant because this coin really got potential
will keep following the Progress
keep it transparent very inportant because this coin really got potential
will keep following the Progress
Jump to: