[ANN] www.L8nit3-Miners.com! 2 pools - 12 coins - lowered fees! - page 9.

lyolyalya

sr. member

Activity: 455

Merit: 250

Quote from: l8nit3 on August 03, 2017, 11:04:07 AM

Quote from: lyolyalya on August 03, 2017, 10:43:09 AM

i found 2 block on woodcoin pool during last 2 hours but no blocks at pool last 18 hours...

Currently at my day job, however, I will look into it the second I have time available

thank you for reporting.

blocks are fine.they appearing after 20-30 minutes...but now i'm afraid about tx's...there were 4 tx's with 458 woodcoin, but no coins in my pocket on c-cex...
WkUUHG2zDC4SeRSLzTM9wf9aQxuo3hHhKJ if it helps..

http://img.techpowerup.org/170804/b7fzp5tm1q.jpg

1.73 credited fine but all other tx's are gone...
blockexpert says that no tx's after 1.73

https://www.blockexperts.com/log/address/WkUUHG2zDC4SeRSLzTM9wf9aQxuo3hHhKJ

l8nit3

legendary

Activity: 1007

Merit: 1000

Quote from: lyolyalya on August 03, 2017, 10:43:09 AM

i found 2 block on woodcoin pool during last 2 hours but no blocks at pool last 18 hours...

Currently at my day job, however, I will look into it the second I have time available

thank you for reporting.

lyolyalya

sr. member

Activity: 455

Merit: 250

i found 2 block on woodcoin pool during last 2 hours but no blocks at pool last 18 hours...

l8nit3

legendary

Activity: 1007

Merit: 1000

Quote from: wendigoBS on August 02, 2017, 09:56:08 AM

For me is all teh time giving this error :

[2017-08-02 16:53:29] Starting Stratum on stratum+tcp://107.161.95.108:5766
[2017-08-02 16:53:29] 12 miner threads started, using 'hmq1725' algorithm.
[2017-08-02 16:53:50] Stratum connection failed: Failed to connect to 107.161.95.108 port 5766: Timed out
[2017-08-02 16:53:50] ...retry after 10 seconds

Is online the pool ??

Looking into it right now

@wendigo your screen grab shows your using the hmq1725 mining algo, whereas we dont currently have any hmq1725 coins. Your choice is scrypt, skein2, or blake2s. The mining software featured on the webpage is from when we had hmq1725 coins, and I have been very busy with code, and have not yet updated that section. Using port 5766 it looks like youd like to mine blake2s.... and will need a miner for that algo.

@mrmerson it seems your Password is set to "c=PI" that was for mining picoin when available here. you need to change it to your desired coin "c=XGTC"

Mr.merson

full member

Activity: 200

Merit: 100

Stratum authentication failed Embarrassed

http://imgur.com/a/dbuee

wendigoBS

newbie

Activity: 17

Merit: 0

For me is all teh time giving this error :

[2017-08-02 16:53:29] Starting Stratum on stratum+tcp://107.161.95.108:5766
[2017-08-02 16:53:29] 12 miner threads started, using 'hmq1725' algorithm.
[2017-08-02 16:53:50] Stratum connection failed: Failed to connect to 107.161.95.108 port 5766: Timed out
[2017-08-02 16:53:50] ...retry after 10 seconds

Is online the pool ??

l8nit3

legendary

Activity: 1007

Merit: 1000

Quote from: lyolyalya on July 31, 2017, 02:31:47 PM

wow-wow=)easy

blocks are fine now.

Profit and block counts populate automatically over time. Its not something thats added in by hand. Glad the blocks show correctly for you now though 😊

lyolyalya

sr. member

Activity: 455

Merit: 250

wow-wow=)easy

blocks are fine now.

lyolyalya

sr. member

Activity: 455

Merit: 250

Quote from: l8nit3 on July 31, 2017, 02:17:36 PM

Quote

would you add blakestar profit?

Im not sure what you mean?

http://img.techpowerup.org/170731/p1kalmig2k091.jpg

aaand strange thing - i found a block(9528) with blakestar 10 minutes ago - but it's not showing anywhere...

l8nit3

legendary

Activity: 1007

Merit: 1000

Quote

would you add blakestar profit?

Im not sure what you mean?

lyolyalya

sr. member

Activity: 455

Merit: 250

Quote from: l8nit3 on July 31, 2017, 02:02:18 PM

Quote from: lyolyalya on July 31, 2017, 01:53:54 PM

connected to woodcoin now...

Woodcoin has been fixed, and BlakeStar I am working on right now

Should be all set for both coins now

yepp.blakestar connected too=)would you add blakestar profit?

l8nit3

legendary

Activity: 1007

Merit: 1000

Quote from: lyolyalya on July 31, 2017, 01:53:54 PM

connected to woodcoin now...

Woodcoin has been fixed, and BlakeStar I am working on right now

Should be all set for both coins now

lyolyalya

sr. member

Activity: 455

Merit: 250

connected to woodcoin now...

lyolyalya

sr. member

Activity: 455

Merit: 250

i'm just found your pool, and i see woodcoin in main section now but i can't connect via stratum+tcp://107.161.95.108:5233 -u WkUUHG2zDC4SeRSLzTM9wf9aQxuo3hHhKJ

Code:

[2017-07-31 21:22:45] Starting on stratum+tcp://107.161.95.108:5233
[2017-07-31 21:22:45] NVML GPU monitoring enabled.
[2017-07-31 21:22:45] 4 miner threads started, using 'skein2' algorithm.
[2017-07-31 21:22:47] Stratum connection failed: Failed to connect to 107.161.95.108 port 5233: Connection refused
[2017-07-31 21:22:47] ...retry after 30 seconds

same for blakestar...

l8nit3

legendary

Activity: 1007

Merit: 1000

Quote from: lyolyalya on July 31, 2017, 10:31:41 AM

Quote from: l8nit3 on July 31, 2017, 10:21:12 AM

Quote from: lyolyalya on July 31, 2017, 10:10:29 AM

we need woodcoin!=) Wink

I apologize, I had removed all other coins then XGTC [which I have taken over as dev] while I worked on the codebase for XGTC. However I was having issues with woodcoin payouts not pushing through [likely due to a config issue on my part].
Now that the 2.1.1 wallet has been released for my coin I will be able to give the time needed to fixing the issues at the pool and woodcoin will be featured again soon

Again I apologize for any inconvenience.

okay.will wait.hope it's not so long Cool

Just so I am sure, have you or anyone else received a LOG payment from the pool? During anytime you mined there?

I believe that the config issue has been resolved and the WOODCOIN portion of the pool is back open in beta testing status

lyolyalya

sr. member

Activity: 455

Merit: 250

Quote from: l8nit3 on July 31, 2017, 10:21:12 AM

Quote from: lyolyalya on July 31, 2017, 10:10:29 AM

we need woodcoin!=) Wink

I apologize, I had removed all other coins then XGTC [which I have taken over as dev] while I worked on the codebase for XGTC. However I was having issues with woodcoin payouts not pushing through [likely due to a config issue on my part].
Now that the 2.1.1 wallet has been released for my coin I will be able to give the time needed to fixing the issues at the pool and woodcoin will be featured again soon

Again I apologize for any inconvenience.

okay.will wait.hope it's not so long Cool

l8nit3

legendary

Activity: 1007

Merit: 1000

Quote from: lyolyalya on July 31, 2017, 10:10:29 AM

we need woodcoin!=) Wink

I apologize, I had removed all other coins then XGTC [which I have taken over as dev] while I worked on the codebase for XGTC. However I was having issues with woodcoin payouts not pushing through [likely due to a config issue on my part].
Now that the 2.1.1 wallet has been released for my coin I will be able to give the time needed to fixing the issues at the pool and woodcoin will be featured again soon

Again I apologize for any inconvenience.

lyolyalya

sr. member

Activity: 455

Merit: 250

we need woodcoin!=) Wink

l8nit3

legendary

Activity: 1007

Merit: 1000

Quote from: uslfd on July 06, 2017, 04:27:57 PM

Hello, I'm completely new... is there some guidance as to how to join / use?
I'm not even quite sure how to configure my miner!
Do you have some recommended links for info?

Thanks!

use the info below in your configuration:

Stratum url: stratum+tcp://107.161.95.108:PORT
username: YOUR WALLET ADDRESS
password: c=COINSYMBOL <- example c=PI

so in command line [using PiCoin as an example]:
-o stratum+tcp://107.161.95.108:3633 -u WALLETADDRESS -p c=PI

uslfd

full member

Activity: 294

Merit: 100

Hello, I'm completely new... is there some guidance as to how to join / use?
I'm not even quite sure how to configure my miner!
Do you have some recommended links for info?

Thanks!

Topic: [ANN] www.L8nit3-Miners.com! 2 pools - 12 coins - lowered fees! - page 9. (Read 6619 times)