Topic: [ANN] [XMG] MAGI | CPU mining | mPoW | mPoS | [MagiPay] - page 718. (Read 2375999 times)
Thank's - same to you!
Thats a awesome picture for the Proof of Interest campaign! Well done!
It seems that I am fianlly able to get over my personal stuffs, and to get the magi stuffs on the track in the following periods (estimate to be weeks or maybe months). It was tough and this happened back to February of this year. I won't be too honest to talk about what happened, but you know that is something like a life change. I still have to finalize my stuffs and then a concrete plan about magi.
A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.
Thanks to all for your patience and efforts by far.
A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.
Thanks to all for your patience and efforts by far.
Glad you are back Joe and ready to push Magi forward to new heights. It is nice to see new stuff happen in the Magi community. It is always active and very friendly. A Coin Magi wallet for the Raspberry Pi would be something great to have. Happy Thanksgiving by the way!
An RPi XMG wallet? There's a TON of work that needs to be done on the XMG wallet before that even begins to make sense. It's based on older coin code, and it SERIOUSLY shows it in that it maxes out a core for quite a while on startup, and uses quite a bit of memory by itself. I'm fairly sure that if you tried to load magid on a Pi or a Pi2, it would get OOM killed unless you had swap space to supplement the small RAM capacity - and even then, you'd have to wait a week for it to finish starting up.
Wolf0 which version of wallet give you that problem? with or without Qt?
i've wallet running on RPi 2 Kernel 3.x in less than 2 min ( if synched ).
There are also some extra stuff to do on RPi 2 and i'm currently modding miner for that but it's really slow because i've nit much time.
If needed i can give you some info for build it on RPi 2, because my site shutdown some days ago.
Regards
I have an ARM board, but it's not an RPi2. Anyways, do you use swap on that? And I'm amazingly surprised if it starts in less than 2min if synced.
Yes i've enabled swap but only for the Qt version.
I've also checked on other board, but RPi 2 give me the best results.
I'm waiting banana pi m3, when arrive, i can check also this one.
I'm using also RPi 2 for mining with your modded miner + some extraflag for RPi optimization at 4.73k/hash without overclock and 5,25K/hash with RPi2 overclock @ 1 ghz.
All without heatsink.
Regards
may i ask how are you able to get 4.73k hash with RPI2 i am lucky to get alittle over 1k
Hi elpsycongro,
here http://www.m-talk.org/viewtopic.php?f=7&t=88 my old post how to build it.
Regard
It seems that I am fianlly able to get over my personal stuffs, and to get the magi stuffs on the track in the following periods (estimate to be weeks or maybe months). It was tough and this happened back to February of this year. I won't be too honest to talk about what happened, but you know that is something like a life change. I still have to finalize my stuffs and then a concrete plan about magi.
A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.
Thanks to all for your patience and efforts by far.
A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.
Thanks to all for your patience and efforts by far.
Glad you are back Joe and ready to push Magi forward to new heights. It is nice to see new stuff happen in the Magi community. It is always active and very friendly. A Coin Magi wallet for the Raspberry Pi would be something great to have. Happy Thanksgiving by the way!
An RPi XMG wallet? There's a TON of work that needs to be done on the XMG wallet before that even begins to make sense. It's based on older coin code, and it SERIOUSLY shows it in that it maxes out a core for quite a while on startup, and uses quite a bit of memory by itself. I'm fairly sure that if you tried to load magid on a Pi or a Pi2, it would get OOM killed unless you had swap space to supplement the small RAM capacity - and even then, you'd have to wait a week for it to finish starting up.
Wolf0 which version of wallet give you that problem? with or without Qt?
i've wallet running on RPi 2 Kernel 3.x in less than 2 min ( if synched ).
There are also some extra stuff to do on RPi 2 and i'm currently modding miner for that but it's really slow because i've nit much time.
If needed i can give you some info for build it on RPi 2, because my site shutdown some days ago.
Regards
I have an ARM board, but it's not an RPi2. Anyways, do you use swap on that? And I'm amazingly surprised if it starts in less than 2min if synced.
Yes i've enabled swap but only for the Qt version.
I've also checked on other board, but RPi 2 give me the best results.
I'm waiting banana pi m3, when arrive, i can check also this one.
I'm using also RPi 2 for mining with your modded miner + some extraflag for RPi optimization at 4.73k/hash without overclock and 5,25K/hash with RPi2 overclock @ 1 ghz.
All without heatsink.
Regards
may i ask how are you able to get 4.73k hash with RPI2 i am lucky to get alittle over 1k
Hi elpsycongro,
here http://www.m-talk.org/viewtopic.php?f=7&t=88 my old post how to build it.
Regard
You and Kondiomir are doing a very good job with making those great promotion pictures.
I will send you both a reward.
It seems that I am fianlly able to get over my personal stuffs, and to get the magi stuffs on the track in the following periods (estimate to be weeks or maybe months). It was tough and this happened back to February of this year. I won't be too honest to talk about what happened, but you know that is something like a life change. I still have to finalize my stuffs and then a concrete plan about magi.
A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.
Thanks to all for your patience and efforts by far.
A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.
Thanks to all for your patience and efforts by far.
Glad you are back Joe and ready to push Magi forward to new heights. It is nice to see new stuff happen in the Magi community. It is always active and very friendly. A Coin Magi wallet for the Raspberry Pi would be something great to have. Happy Thanksgiving by the way!
An RPi XMG wallet? There's a TON of work that needs to be done on the XMG wallet before that even begins to make sense. It's based on older coin code, and it SERIOUSLY shows it in that it maxes out a core for quite a while on startup, and uses quite a bit of memory by itself. I'm fairly sure that if you tried to load magid on a Pi or a Pi2, it would get OOM killed unless you had swap space to supplement the small RAM capacity - and even then, you'd have to wait a week for it to finish starting up.
Wolf0 which version of wallet give you that problem? with or without Qt?
i've wallet running on RPi 2 Kernel 3.x in less than 2 min ( if synched ).
There are also some extra stuff to do on RPi 2 and i'm currently modding miner for that but it's really slow because i've nit much time.
If needed i can give you some info for build it on RPi 2, because my site shutdown some days ago.
Regards
I have an ARM board, but it's not an RPi2. Anyways, do you use swap on that? And I'm amazingly surprised if it starts in less than 2min if synced.
Yes i've enabled swap but only for the Qt version.
I've also checked on other board, but RPi 2 give me the best results.
I'm waiting banana pi m3, when arrive, i can check also this one.
I'm using also RPi 2 for mining with your modded miner + some extraflag for RPi optimization at 4.73k/hash without overclock and 5,25K/hash with RPi2 overclock @ 1 ghz.
All without heatsink.
Regards
may i ask how are you able to get 4.73k hash with RPI2 i am lucky to get alittle over 1k
I'm using also RPi 2 for mining with your modded miner + some extraflag for RPi optimization at 4.73k/hash without overclock and 5,25K/hash with RPi2 overclock @ 1 ghz.
All without heatsink.
Regards
Those are some nice results from mining with a Raspberry Pi 2. I also have one, but I'm not very familiar with overclocking it (as I don't know how to do so on the Pi). Even still, that is a very decent hashrate and sometimes I wonder how XMG mining would be when we merge different RPis as a single system (parallel computing). If this could be achieved on multiple RPis, then it would be a totally awesome XMG mining machine!
Yes true.
i'm also modding the code to use the GPU of RPi, but actually i've some synch problem between NEON ASM code an mine thread x CPU.
I hope to solve that...
Regards
Well, hop on IRC when you can, I'll be there. The RPi's GPU doesn't support OpenCL, right?
No, openCL not supported @ Moment.
you can try in this way to use the broadcom chip.
https://rpiplayground.wordpress.com/2014/05/03/hacking-the-gpu-for-fun-and-profit-pt-1/
http://maazl.de/project/vc4asm/doc/index.html
If u need OpenCL there's some implementation here http://parallelplusplus.blogspot.it/2015/10/opencl-on-raspberry-pi-2.html but without GPU, only OpenCL on CPU usage.
Regards
OpenCL on the CPU is a waste of time here. Either I finish my mostly done OpenCL M7M implementation and run on AMD, or do an FPGA design for M7M. Probably the former, the latter would be hard.
Wow good opencl m7m algo!
I'm porting (very slowly due to time needed ) the m7m routine to neon asm.
Also i'm making some little modding anso, for examples exp_n(double xt) do more check before return the exp(xt), but if u debug the code, i see 99,99% of times the if used is the last, but before doing that u use lot of cpu cycle that can be avoided.
Also for the exp_n2, etc..
On big cpu/gpu is not a problem 1 o 2 cpu cycles plus, but on a little arm it's really different :-)
Regards
I'm using also RPi 2 for mining with your modded miner + some extraflag for RPi optimization at 4.73k/hash without overclock and 5,25K/hash with RPi2 overclock @ 1 ghz.
All without heatsink.
Regards
Those are some nice results from mining with a Raspberry Pi 2. I also have one, but I'm not very familiar with overclocking it (as I don't know how to do so on the Pi). Even still, that is a very decent hashrate and sometimes I wonder how XMG mining would be when we merge different RPis as a single system (parallel computing). If this could be achieved on multiple RPis, then it would be a totally awesome XMG mining machine!
Yes true.
i'm also modding the code to use the GPU of RPi, but actually i've some synch problem between NEON ASM code an mine thread x CPU.
I hope to solve that...
Regards
Well, hop on IRC when you can, I'll be there. The RPi's GPU doesn't support OpenCL, right?
No, openCL not supported @ Moment.
you can try in this way to use the broadcom chip.
https://rpiplayground.wordpress.com/2014/05/03/hacking-the-gpu-for-fun-and-profit-pt-1/
http://maazl.de/project/vc4asm/doc/index.html
If u need OpenCL there's some implementation here http://parallelplusplus.blogspot.it/2015/10/opencl-on-raspberry-pi-2.html but without GPU, only OpenCL on CPU usage.
Regards
It seems that I am fianlly able to get over my personal stuffs, and to get the magi stuffs on the track in the following periods (estimate to be weeks or maybe months). It was tough and this happened back to February of this year. I won't be too honest to talk about what happened, but you know that is something like a life change. I still have to finalize my stuffs and then a concrete plan about magi.
A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.
Thanks to all for your patience and efforts by far.
A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.
Thanks to all for your patience and efforts by far.
Glad you are back Joe and ready to push Magi forward to new heights. It is nice to see new stuff happen in the Magi community. It is always active and very friendly. A Coin Magi wallet for the Raspberry Pi would be something great to have. Happy Thanksgiving by the way!
An RPi XMG wallet? There's a TON of work that needs to be done on the XMG wallet before that even begins to make sense. It's based on older coin code, and it SERIOUSLY shows it in that it maxes out a core for quite a while on startup, and uses quite a bit of memory by itself. I'm fairly sure that if you tried to load magid on a Pi or a Pi2, it would get OOM killed unless you had swap space to supplement the small RAM capacity - and even then, you'd have to wait a week for it to finish starting up.
Wolf0 which version of wallet give you that problem? with or without Qt?
i've wallet running on RPi 2 Kernel 3.x in less than 2 min ( if synched ).
There are also some extra stuff to do on RPi 2 and i'm currently modding miner for that but it's really slow because i've nit much time.
If needed i can give you some info for build it on RPi 2, because my site shutdown some days ago.
Regards
I have an ARM board, but it's not an RPi2. Anyways, do you use swap on that? And I'm amazingly surprised if it starts in less than 2min if synced.
Yes i've enabled swap but only for the Qt version.
I've also checked on other board, but RPi 2 give me the best results.
I'm waiting banana pi m3, when arrive, i can check also this one.
I'm using also RPi 2 for mining with your modded miner + some extraflag for RPi optimization at 4.73k/hash without overclock and 5,25K/hash with RPi2 overclock @ 1 ghz.
All without heatsink.
Regards
Are you on IRC? I might run it on my Arrow SoCKit.
I've checked now the Arrow SoCKit for first time.
Wow, a good board, also with 2 Gb of ram....appers to be very promising.
a little bit more expansive than rpi , but also with FPGA inside....very good!
Regards
I'm using also RPi 2 for mining with your modded miner + some extraflag for RPi optimization at 4.73k/hash without overclock and 5,25K/hash with RPi2 overclock @ 1 ghz.
All without heatsink.
Regards
Those are some nice results from mining with a Raspberry Pi 2. I also have one, but I'm not very familiar with overclocking it (as I don't know how to do so on the Pi). Even still, that is a very decent hashrate and sometimes I wonder how XMG mining would be when we merge different RPis as a single system (parallel computing). If this could be achieved on multiple RPis, then it would be a totally awesome XMG mining machine!
Yes true.
i'm also modding the code to use the GPU of RPi, but actually i've some synch problem between NEON ASM code an mine thread x CPU.
I hope to solve that...
Regards
It seems that I am fianlly able to get over my personal stuffs, and to get the magi stuffs on the track in the following periods (estimate to be weeks or maybe months). It was tough and this happened back to February of this year. I won't be too honest to talk about what happened, but you know that is something like a life change. I still have to finalize my stuffs and then a concrete plan about magi.
A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.
Thanks to all for your patience and efforts by far.
A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.
Thanks to all for your patience and efforts by far.
Glad you are back Joe and ready to push Magi forward to new heights. It is nice to see new stuff happen in the Magi community. It is always active and very friendly. A Coin Magi wallet for the Raspberry Pi would be something great to have. Happy Thanksgiving by the way!
An RPi XMG wallet? There's a TON of work that needs to be done on the XMG wallet before that even begins to make sense. It's based on older coin code, and it SERIOUSLY shows it in that it maxes out a core for quite a while on startup, and uses quite a bit of memory by itself. I'm fairly sure that if you tried to load magid on a Pi or a Pi2, it would get OOM killed unless you had swap space to supplement the small RAM capacity - and even then, you'd have to wait a week for it to finish starting up.
Wolf0 which version of wallet give you that problem? with or without Qt?
i've wallet running on RPi 2 Kernel 3.x in less than 2 min ( if synched ).
There are also some extra stuff to do on RPi 2 and i'm currently modding miner for that but it's really slow because i've nit much time.
If needed i can give you some info for build it on RPi 2, because my site shutdown some days ago.
Regards
I have an ARM board, but it's not an RPi2. Anyways, do you use swap on that? And I'm amazingly surprised if it starts in less than 2min if synced.
Yes i've enabled swap but only for the Qt version.
I've also checked on other board, but RPi 2 give me the best results.
I'm waiting banana pi m3, when arrive, i can check also this one.
I'm using also RPi 2 for mining with your modded miner + some extraflag for RPi optimization at 4.73k/hash without overclock and 5,25K/hash with RPi2 overclock @ 1 ghz.
All without heatsink.
Regards
Are you on IRC? I might run it on my Arrow SoCKit.
Sorry but actually i can't ( i'm @ office
)I've reuploaded the Magi Wallet for RPi2 without Qt
hzzp://s000.tinyupload.com/?file_id=09267376571534088364
And the same with Qt
hzzp://s000.tinyupload.com/?file_id=36203352951804969468
Try if there's some speed difference.
Also, all of that on Kernel 3.x not Kernel 4.x.
If needed i've also the speed screenshot from my site raspi2miner.is-great.org, but i've to find another place to host my
page because the actual provider don't like bitcoin related site.
Regards
I'm using also RPi 2 for mining with your modded miner + some extraflag for RPi optimization at 4.73k/hash without overclock and 5,25K/hash with RPi2 overclock @ 1 ghz.
All without heatsink.
Regards
Those are some nice results from mining with a Raspberry Pi 2. I also have one, but I'm not very familiar with overclocking it (as I don't know how to do so on the Pi). Even still, that is a very decent hashrate and sometimes I wonder how XMG mining would be when we merge different RPis as a single system (parallel computing). If this could be achieved on multiple RPis, then it would be a totally awesome XMG mining machine!
It seems that I am fianlly able to get over my personal stuffs, and to get the magi stuffs on the track in the following periods (estimate to be weeks or maybe months). It was tough and this happened back to February of this year. I won't be too honest to talk about what happened, but you know that is something like a life change. I still have to finalize my stuffs and then a concrete plan about magi.
A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.
Thanks to all for your patience and efforts by far.
A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.
Thanks to all for your patience and efforts by far.
Glad you are back Joe and ready to push Magi forward to new heights. It is nice to see new stuff happen in the Magi community. It is always active and very friendly. A Coin Magi wallet for the Raspberry Pi would be something great to have. Happy Thanksgiving by the way!
An RPi XMG wallet? There's a TON of work that needs to be done on the XMG wallet before that even begins to make sense. It's based on older coin code, and it SERIOUSLY shows it in that it maxes out a core for quite a while on startup, and uses quite a bit of memory by itself. I'm fairly sure that if you tried to load magid on a Pi or a Pi2, it would get OOM killed unless you had swap space to supplement the small RAM capacity - and even then, you'd have to wait a week for it to finish starting up.
Wolf0 which version of wallet give you that problem? with or without Qt?
i've wallet running on RPi 2 Kernel 3.x in less than 2 min ( if synched ).
There are also some extra stuff to do on RPi 2 and i'm currently modding miner for that but it's really slow because i've nit much time.
If needed i can give you some info for build it on RPi 2, because my site shutdown some days ago.
Regards
I have an ARM board, but it's not an RPi2. Anyways, do you use swap on that? And I'm amazingly surprised if it starts in less than 2min if synced.
Yes i've enabled swap but only for the Qt version.
I've also checked on other board, but RPi 2 give me the best results.
I'm waiting banana pi m3, when arrive, i can check also this one.
I'm using also RPi 2 for mining with your modded miner + some extraflag for RPi optimization at 4.73k/hash without overclock and 5,25K/hash with RPi2 overclock @ 1 ghz.
All without heatsink.
Regards
It seems that I am fianlly able to get over my personal stuffs, and to get the magi stuffs on the track in the following periods (estimate to be weeks or maybe months). It was tough and this happened back to February of this year. I won't be too honest to talk about what happened, but you know that is something like a life change. I still have to finalize my stuffs and then a concrete plan about magi.
A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.
Thanks to all for your patience and efforts by far.
A rough plan, 1) the first thing I believe to look at that is very urgent is the PoW mining we talked; I might be able to look into the things in the middle of Dec. or during the Christmas: basically summarize the PoW / PoS discussion, a plan as to what I am going to do, and pushing actual works out (in Jan. or most likely Feb.). The progress will depend on my timing in real job. I am not saying I do have the solutions as to what happened, but I do have energies to push out solutions, and believe the coin deserves such efforts; 2) I like and would like to push the magi-pi project; 3) We have to push XMG towards sort of business and make it appear to be a role that it should be. I am not guaranteeing what I will be done; I felt this is the turning point of my own situation and thus the above updates.
Thanks to all for your patience and efforts by far.
Glad you are back Joe and ready to push Magi forward to new heights. It is nice to see new stuff happen in the Magi community. It is always active and very friendly. A Coin Magi wallet for the Raspberry Pi would be something great to have. Happy Thanksgiving by the way!
An RPi XMG wallet? There's a TON of work that needs to be done on the XMG wallet before that even begins to make sense. It's based on older coin code, and it SERIOUSLY shows it in that it maxes out a core for quite a while on startup, and uses quite a bit of memory by itself. I'm fairly sure that if you tried to load magid on a Pi or a Pi2, it would get OOM killed unless you had swap space to supplement the small RAM capacity - and even then, you'd have to wait a week for it to finish starting up.
Wolf0 which version of wallet give you that problem? with or without Qt?
i've wallet running on RPi 2 Kernel 3.x in less than 2 min ( if synched ).
There are also some extra stuff to do on RPi 2 and i'm currently modding miner for that but it's really slow because i've nit much time.
If needed i can give you some info for build it on RPi 2, because my site shutdown some days ago.
Regards
This is just awesome ! I love this picture ! I think this is the best Magi fan art ever realised ! You're really good at graphics (I saw your Expanse wallpapers, they're awesome too
) !Its a cool picture.
Can i request a special one?
For the new Proof of Interest!
https://bitcointalksearch.org/topic/m.13043429
Ivugeo exchange is working on this issue!
Hope they can solve it!
Ivugeo exchange is working on this issue!
Hope they can solve it!
https://bitcointalksearch.org/topic/m.13095912
Looks like they are still working on the issues. Hope they will solve the problems!
Give them some time.
Hi 111magic!
Thank you for your words of understanding and encouragement! At the moment we are working on the solution of our problems! As I said, we will solve this problem in 5 days! We look forward to close cooperation with your community, I think that only together we can create an honest business! We are always open to new and honest people!
https://bitcointalksearch.org/topic/m.13043429
Ivugeo exchange is working on this issue!
Hope they can solve it!
Ivugeo exchange is working on this issue!
Hope they can solve it!
https://bitcointalksearch.org/topic/m.13095912
Looks like they are still working on the issues. Hope they will solve the problems!
Give them some time.
Hi 111magic!
Thank you for your words of understanding and encouragement! At the moment we are working on the solution of our problems! As I said, we will solve this problem in 5 days! We look forward to close cooperation with your community, I think that only together we can create an honest business! We are always open to new and honest people!
Jump to: