Topic: [ANN] [XRE] Revolver Coin. Decentralized Reward Platform. - page 25. (Read 165021 times)
No any news for a long time. Dead scam coin.
I solved problem.
I manually selected desired amount of XRE in "Coin Control Features-Inpits", so I got "Bytes"<1000 and "Change">0. After that my transaction was successfully sent
Thanks for all, who helped me!
I manually selected desired amount of XRE in "Coin Control Features-Inpits", so I got "Bytes"<1000 and "Change">0. After that my transaction was successfully sent
Thanks for all, who helped me!
Try it this way.
1. take the settings so
2. make a backup of your wallet.dat than add -zapwallettxes parameter to a shortcut on the desktop of revolvercoin-qt.exe, start it and wait until the process finishes do not forget to remove the extraParameter the next time you run Your wallet.
3. Run the Wallet NEW make a Transf.
If this does not help, I unfortunately also no longer further, maybe your RevolverCoin client is complained then I would make everything new and insert wallet.
This can't be selected if "Coin control features" is enabled. Only if "Coin control features" is set to "automatic" as default.
ehm... just put the wallet full screen or use the slider
this amount...
This can't be selected if "Coin control features" is enabled. Only if "Coin control features" is set to "automatic" as default.Why not standard ?
Because this ends up with never confirmed transactions. See my earlier messages and screenshots.
Why not standard ?
this amount...
if the wallet says insufficient fund there's a problem with the inserted sum i can't see in the screenshot the amout and if you selected or not to subtract fee to amout.
Can't see amount? Very strange 
It can be clearly seen on my screnshot:
I did all as you said: enabled the checkbox in settings > option > wallet > enable coin control features and restarted the wallet. After that, clicked on Send > Coin Control Feature > Inputs and selected the inputs. Total size in bytes is 966 bytes. Also, Transaction fee was "Recommended".
if the wallet says insufficient fund there's a problem with the inserted sum i can't see in the screenshot the amout and if you selected or not to subtract fee to amout.
if the selected amount of various input is 600 XRE you can't send more thant that.
Sorry, I don't understand you.I have 2882 XRE in wallet. I selected to send 600 XRE. Definitely 600 < 2882
if the selected amount of various input is 600 XRE you can't send more thant that, which is the sum ?
looking at the fee of 0.00028120 that is bigger than 0.00020000 i can deduce that your transaction is more than 1000 bytes the current TX size limit, this is because you have many different small TX in your wallet.
so try this: enable the checkbox in settings > option > wallet > enable coin control features and restart the wallet, then when you click on Send > Coin Control Feature > Inputs select the inputs and don't surpass 1000 bytes of total size and send to whoever you want.
Hello!so try this: enable the checkbox in settings > option > wallet > enable coin control features and restart the wallet, then when you click on Send > Coin Control Feature > Inputs select the inputs and don't surpass 1000 bytes of total size and send to whoever you want.
Thanks for suggestion. I did as you said and got this: http://imgur.com/a/tfmH4
So, what's the problem now?
looking at the fee of 0.00028120 that is bigger than 0.00020000 i can deduce that your transaction is more than 1000 bytes the current TX size limit, this is because you have many different small TX in your wallet.
so try this: enable the checkbox in settings > option > wallet > enable coin control features and restart the wallet, then when you click on Send > Coin Control Feature > Inputs select the inputs and don't surpass 1000 bytes of total size and send to whoever you want.
so try this: enable the checkbox in settings > option > wallet > enable coin control features and restart the wallet, then when you click on Send > Coin Control Feature > Inputs select the inputs and don't surpass 1000 bytes of total size and send to whoever you want.
did you lower the Transaction Fee, the default value is 0.00020000 XRE/kB what's yours ?
I tried different fees with no success.The last attempt with "Recommended" fee, for example:
Code:
Status: 0/unconfirmed, broadcast through 10 nodes
Date: 07.01.2017 12:04
To: Cryptopia 1NwbgYn3kPSTdCePvJCsg66zeD7gMreaJR
Debit: -1000.00000000 XRE
Transaction fee: -0.00028120 XRE
Net amount: -1000.00028120 XRE
Transaction ID: 827da2cb72f1ca2cc37f09142a773184facd1e3d328e7b996a0eedc8147b0d11-000
did you lower the Transaction Fee, the default value is 0.00020000 XRE/kB what's yours ?
You're the only one with the problem I had that time but it was already 3 weeks ago I had it done as Jack wrote it and am then only on one peer and it works.
I don't understand what you are talking about.Problem exist - this is a fact. Maybe it's a problem with wallet, maybe something else - i don't know.
So, anybody can help?
You're the only one with the problem I had that time but it was already 3 weeks ago I had it done as Jack wrote it and am then only on one peer and it works.
if your client synced on the last block an the tx still without confirmation is probably stuck so make a backup of your wallet.dat than add -zapwallettxes parameter to a shortcut on the desktop of revolvercoin-qt.exe, start it and wait until the process finishes don't forget to remove the extra parameter the next time you run your wallet.
My client is fully synced with official XRE explorer.I did as you suggested and money came back to my wallet. Thanks.
But, I think that problem is deeper, because i sent smaller amount and got this problem again:
Code:
Status: 0/unconfirmed, broadcast through 11 nodes
Date: 06.01.2017 11:52
To: Cryptopia 1NwbgYn3kPSTdCePvJCsg66zeD7gMreaJR
Debit: -1000.00000000 XRE
Transaction fee: -0.00002144 XRE
Net amount: -1000.00002144 XRE
Transaction ID: 4670adb1e7c828c49efa2e5c00d9b4d050d9d97fc47f31e2c50220c8634151ac-000
Something wrong with Revolvercoin...
You must possibly repeat everything, takes with me also longer I am only connected via a node and have no problems 178.62.66.124:8777
Status: 6 Bestätigungen, über 1 Knoten übertragen
Datum: 06.01.2017 17:11
An: https://www.cryptopia.co.nz/Balances XXXXEPQtGWtRgJC8B4zBZcSKg6iBnXXXXX
Belastung: -5.00000000 XRE
Transaktionsgebühr: -0.00002260 XRE
Nettobetrag: -5.00002260 XRE
Transaktions-ID: 89d7f39466140d6a8a8cf2c29bda9e279b677f85ef75XXXX7bdb4d0d86a7da-000
I have 11 connected peers in wallet, so this is not a problem.
I also lowered transaction to 500 XRE - still no success
Code:
Status: 0/unconfirmed, broadcast through 12 nodes
Date: 06.01.2017 16:40
To: Cryptopia 1NwbgYn3kPSTdCePvJCsg66zeD7gMreaJR
Debit: -500.00000000 XRE
Transaction fee: -0.00001553 XRE
Net amount: -500.00001553 XRE
Transaction ID: 5f454dc4924136c4b34374ca126b1eb31a8c6806585af470d273241439fb02ac-000
if your client synced on the last block an the tx still without confirmation is probably stuck so make a backup of your wallet.dat than add -zapwallettxes parameter to a shortcut on the desktop of revolvercoin-qt.exe, start it and wait until the process finishes don't forget to remove the extra parameter the next time you run your wallet.
My client is fully synced with official XRE explorer.I did as you suggested and money came back to my wallet. Thanks.
But, I think that problem is deeper, because i sent smaller amount and got this problem again:
Code:
Status: 0/unconfirmed, broadcast through 11 nodes
Date: 06.01.2017 11:52
To: Cryptopia 1NwbgYn3kPSTdCePvJCsg66zeD7gMreaJR
Debit: -1000.00000000 XRE
Transaction fee: -0.00002144 XRE
Net amount: -1000.00002144 XRE
Transaction ID: 4670adb1e7c828c49efa2e5c00d9b4d050d9d97fc47f31e2c50220c8634151ac-000
Something wrong with Revolvercoin...
You must possibly repeat everything, takes with me also longer I am only connected via a node and have no problems 178.62.66.124:8777
Status: 6 Bestätigungen, über 1 Knoten übertragen
Datum: 06.01.2017 17:11
An: https://www.cryptopia.co.nz/Balances XXXXEPQtGWtRgJC8B4zBZcSKg6iBnXXXXX
Belastung: -5.00000000 XRE
Transaktionsgebühr: -0.00002260 XRE
Nettobetrag: -5.00002260 XRE
Transaktions-ID: 89d7f39466140d6a8a8cf2c29bda9e279b677f85ef75XXXX7bdb4d0d86a7da-000
if your client synced on the last block an the tx still without confirmation is probably stuck so make a backup of your wallet.dat than add -zapwallettxes parameter to a shortcut on the desktop of revolvercoin-qt.exe, start it and wait until the process finishes don't forget to remove the extra parameter the next time you run your wallet.
My client is fully synced with official XRE explorer.I did as you suggested and money came back to my wallet. Thanks.
But, I think that problem is deeper, because i sent smaller amount and got this problem again:
Code:
Status: 0/unconfirmed, broadcast through 11 nodes
Date: 06.01.2017 11:52
To: Cryptopia 1NwbgYn3kPSTdCePvJCsg66zeD7gMreaJR
Debit: -1000.00000000 XRE
Transaction fee: -0.00002144 XRE
Net amount: -1000.00002144 XRE
Transaction ID: 4670adb1e7c828c49efa2e5c00d9b4d050d9d97fc47f31e2c50220c8634151ac-000
Something wrong with Revolvercoin...
Jump to: