Topic: [ANN] Xrevolution | POW | X11 | masternodes New wallet UPDATE - page 11. (Read 12770 times)
lol what is that on block 1597?
1333
By the way, clicking "About Xrev Core" causes the wallet to crash.
1681
You're definitely on a different blockchain than I am then. 1331 atm.
1681
You're definitely on a different blockchain than I am then. 1331 atm.
how to fix this ?
1681
1681
Code:
Ho to enable and start running masternode?
1000 coins sent to new generated masternode address
masternode key generated and added to conf file
masternode start

Error: Not capable masternode: Could not connect to xxx.xxx.xxx.xxx:9090
my conf file:
rpcuser=xxx
rpcpassword=xxx
externalip=xxx.xxx.xxx.xxx
rpcallowip=127.0.0.1
rpcport=9091
port=9090
upnp=1
server=1
listen=1
daemon=1
rescan=0
reindex=1
defaultkey=1
logtimestamps=1
maxconnections=256
masternode=1
masternodeprivkey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
verifychain=0
dns=1
rpcthreads=30
addnode=185.173.33.92
Do i need to do something with "masternode.conf" file?
because i see one masternode is already runnnng, can you help me to run mine too ?
Code:
What are Masternodes:
1: Open the console of your wallet and enter the command:
getaccountaddress MN
masternode genkey
2: Send 1000 xrev to the address you just created. It must be exactly 1000, in one transaction.
3: Open the console of your wallet and enter the command:
masternode outputs
4: Open or create the xrev.conf in folder directory for your wallet (C:\Users\Username\AppData\Roaming\xrevcore), write the following:
masternode=1
masternodeprivkey=masternode_genkey
5: Open the masternode.conf in folder directory for your wallet (C:\Users\Username\AppData\Roaming\xrevcore), and edit as follows:
MN your_box_ip:9090 masternode_genkey masternode_outputs
6: Close, and restart your wallet.
7: Open the console of your wallet and enter the command:
masternode start-mn
Perryl Not at all but the string of 2000 block no longer exists it must start from zero
Chain stabilized by masternodes
DEV can you send me 1000 coins to run masternode, thanks
XqdacqnRgcxCXynqFoZYqXy3SVVfTaio4Z
How many block in new blockchain - 1320 ?
1318? 
How many block in new blockchain - 1320 ?
I just read this thread but I can not see any pools for this coin. when is the pool available for mining?
how to make a solo-mining for this coin? Thanks.
how to make a solo-mining for this coin? Thanks.
If you read the previous post about orphans it would explain a bit. Plus it's not new. I have seen this a few times.
I read your previous post. I'm not skipping over yours like you obviously are to mine. I asked several questions that went unanswered. It is still not syncing. With 13 connections and the .conf only having one node added. The one you linked me.
Neither you or the dev have been able to assist with this issue. The dev says you're on the wrong chain, you say your chain is the same as his bootstrap.
My last post was 12 minutes ago. Do you think it's normal to wait 12 minutes for a new chain to sync on a 120 mbps connection?
I guess your right. But the point I was trying to get across was until the difficulty is higher and the chains moves more slowly then the wallet will always show that syncing at 0 hours behind. If you watch the blockchain it does move accordingly and at a fast rate. I was not really concerned about the connection.
It should only show as behind until it syncs. Once it has downloaded all of the required data to sync there should be a checkmark and it should be up to date. At that point, I can mine. I cannot begin solo-mining before that because it is waiting for the chain to download.
I had it sync, once, but then after I restarted the wallet it wouldn't sync again. This was a couple chain deletions ago, maybe I was on the wrong chain. Now, it synced a few minutes ago, but I had a very basic conf and had to do some modifications if I want to begin solo-mining. However, I get 2 different errors based on whether I use xrev.conf or XrevCore.conf. Either way, the mining did not work the first time around. Now I'm still waiting for the chain to sync. Restarting the wallet has resulted in a waiting period of 10 minutes so far and it's only at 58% of "synchronizing additional data". It might sync, or it might get to like 90% and start over again at 0%.
What have you put in your .conf to mine? What have you named your .conf?
I get a "no method" error when using xrev.conf. In my experience, the .conf is supposed to have the same name as the folder it's in. Obviously, I have no idea if this is necessary, but when I add a .conf that is named XrevCore.conf it says "connection refused".
.conf
rpcuser=username
rpcpassword=password
rpcallowip=127.0.0.1
rpcport=9091
port=9090
server=1
listen=1
daemon=1
addnode=185.173.33.92
.bat
ccminer-x64 -a x11 -o http://127.0.0.1:9091 -u username -p password --show-diff --cpu-priority 4
pause
What am I doing wrong? I've used the same setup to mine dozens of coins solo.
The wallet is finally up-to-date after about 20 minutes. All I did is restart it right after it was fully up-to-date, and it took 20 minutes to sync again. Still getting connection refused, though.
[2017-04-25 08:18:00] HTTP request failed: Failed to connect to 127.0.0.1 port 9091: Connection refused
[2017-04-25 08:18:00] get_work failed, retry after 30 seconds
I'd have to restart my wallet and wait another 20 minutes to try something else. lol.
no sync, so only 1 masternodes run from the dev, feels like a 20% founder reward
Working ok, synced, mining.-
At all.
1. Sync issue - YES
2. Maybe fork - YES
3. "Easy" start - YES
4. No pool - YES
5. No GPU mining - YES
6. No ASIC mining - YES
7. ...
8. ...
9. PRETTY LOGO - "@#$% YES!
1. Sync issue - YES
2. Maybe fork - YES
3. "Easy" start - YES
4. No pool - YES
5. No GPU mining - YES
6. No ASIC mining - YES
7. ...
8. ...
9. PRETTY LOGO - "@#$% YES!
A little experiment. Who wants to get 5 coins for free, write down the address of the wallet, I'll send it, just write (preferably with a screenshot) it came or not. Check for the first 10 addresses
Xw2k5qMpuB1BCNgN98evxW6dd7pyJMJJ6i wallet 64 bit
Sent.
What about wallet? It sync?
no
download blockchain
http://xrevolution.ddns.net/XrevCore.rar
The_Prof you have wrong wallet delete all and download new qt wallet
It's not just me then. Everyone linked to me does then.
yes exact All members have to update their portfolio of members have already done it and its roll
delete all data
download qt
download blockchain
http://xrevolution.ddns.net/XrevCore.rar
And when that doesn't work?
Was the same chain. Like I said originally, just keep it going till 2k blocks.
Keep what goes? Waiting for 2k blocks and seeing if it will sync then?
Why hasn't this happened with any other currency? Obviously, the developer is failing somewhere along the lines.
This chain is dead it's other chain
I'm using your bootstrap. Are you saying you linked me a dead chain?
I am leaving my wallet open and running. My opinion is it will settle and all will be good. I am happy to keep loading blockchains if the dev requires but I will not be deleting everything and starting again. My view would be to wait. But it is his coin and he must decide.
Code:
Ho to enable and start running masternode?
1000 coins sent to new generated masternode address
masternode key generated and added to conf file
masternode start

Error: Not capable masternode: Could not connect to xxx.xxx.xxx.xxx:9090
my conf file:
rpcuser=xxx
rpcpassword=xxx
externalip=xxx.xxx.xxx.xxx
rpcallowip=127.0.0.1
rpcport=9091
port=9090
upnp=1
server=1
listen=1
daemon=1
rescan=0
reindex=1
defaultkey=1
logtimestamps=1
maxconnections=256
masternode=1
masternodeprivkey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
verifychain=0
dns=1
rpcthreads=30
addnode=185.173.33.92
Do i need to do something with "masternode.conf" file?
because i see one masternode is already runnnng, can you help me to run mine too ?
Code:
What are Masternodes:
1: Open the console of your wallet and enter the command:
getaccountaddress MN
masternode genkey
2: Send 1000 xrev to the address you just created. It must be exactly 1000, in one transaction.
3: Open the console of your wallet and enter the command:
masternode outputs
4: Open or create the xrev.conf in folder directory for your wallet (C:\Users\Username\AppData\Roaming\xrevcore), write the following:
masternode=1
masternodeprivkey=masternode_genkey
5: Open the masternode.conf in folder directory for your wallet (C:\Users\Username\AppData\Roaming\xrevcore), and edit as follows:
MN your_box_ip:9090 masternode_genkey masternode_outputs
6: Close, and restart your wallet.
7: Open the console of your wallet and enter the command:
masternode start-mn
Perryl Not at all but the string of 2000 block no longer exists it must start from zero
Chain stabilized by masternodes
A little experiment. Who wants to get 5 coins for free, write down the address of the wallet, I'll send it, just write (preferably with a screenshot) it came or not. Check for the first 10 addresses
Xw2k5qMpuB1BCNgN98evxW6dd7pyJMJJ6i wallet 64 bit
XqdacqnRgcxCXynqFoZYqXy3SVVfTaio4Z wallet 64 bit
If you read the previous post about orphans it would explain a bit. Plus it's not new. I have seen this a few times.
I read your previous post. I'm not skipping over yours like you obviously are to mine. I asked several questions that went unanswered. It is still not syncing. With 13 connections and the .conf only having one node added. The one you linked me.
Neither you or the dev have been able to assist with this issue. The dev says you're on the wrong chain, you say your chain is the same as his bootstrap.
My last post was 12 minutes ago. Do you think it's normal to wait 12 minutes for a new chain to sync on a 120 mbps connection?
I guess your right. But the point I was trying to get across was until the difficulty is higher and the chains moves more slowly then the wallet will always show that syncing at 0 hours behind. If you watch the blockchain it does move accordingly and at a fast rate. I was not really concerned about the connection.
A little experiment. Who wants to get 5 coins for free, write down the address of the wallet, I'll send it, just write (preferably with a screenshot) it came or not. Check for the first 10 addresses
Xw2k5qMpuB1BCNgN98evxW6dd7pyJMJJ6i wallet 64 bit
Sent.
What about wallet? It sync?
no
download blockchain
http://xrevolution.ddns.net/XrevCore.rar
The_Prof you have wrong wallet delete all and download new qt wallet
It's not just me then. Everyone linked to me does then.
yes exact All members have to update their portfolio of members have already done it and its roll
delete all data
download qt
download blockchain
http://xrevolution.ddns.net/XrevCore.rar
And when that doesn't work?
Was the same chain. Like I said originally, just keep it going till 2k blocks.
Keep what goes? Waiting for 2k blocks and seeing if it will sync then?
Why hasn't this happened with any other currency? Obviously, the developer is failing somewhere along the lines.
This chain is dead it's other chain
I'm using your bootstrap. Are you saying you linked me a dead chain?
Code:
Ho to enable and start running masternode?
1000 coins sent to new generated masternode address
masternode key generated and added to conf file
masternode start

Error: Not capable masternode: Could not connect to xxx.xxx.xxx.xxx:9090
my conf file:
rpcuser=xxx
rpcpassword=xxx
externalip=xxx.xxx.xxx.xxx
rpcallowip=127.0.0.1
rpcport=9091
port=9090
upnp=1
server=1
listen=1
daemon=1
rescan=0
reindex=1
defaultkey=1
logtimestamps=1
maxconnections=256
masternode=1
masternodeprivkey=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
verifychain=0
dns=1
rpcthreads=30
addnode=185.173.33.92
Do i need to do something with "masternode.conf" file?
because i see one masternode is already runnnng, can you help me to run mine too ?
exchange soon
on demand tradesatoshi, c-cex, yobit and poloniex
addnode=xrevolution.ddns.net
on demand tradesatoshi, c-cex, yobit and poloniex
addnode=xrevolution.ddns.net
addnode=xrevmaster.ddns.net
latest chain and wallet.
latest chain and wallet.
Deleted chain and only using this node. Same issue.
17:55:30

Method not found (code -32601)
Jump to: