[ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9 - page 52.

provenceday

legendary

Activity: 1148

Merit: 1000

Quote from: luckydoky on February 09, 2019, 10:40:48 AM

For me it won't even start on cukatoo31 with a 2080ti

[FATA] [2019-02-09T16:37:09+01:00] Insufficient memory 9028.42 MB available on device (#0). Unable to run the solver

2 gps sounds good though, I get ~1.5 with gminer

on windows?

provenceday

legendary

Activity: 1148

Merit: 1000

very high rejected rate on 2080Ti, like 40% been rejected?

luckydoky

jr. member

Activity: 231

Merit: 1

For me it won't even start on cukatoo31 with a 2080ti

[FATA] [2019-02-09T16:37:09+01:00] Insufficient memory 9028.42 MB available on device (#0). Unable to run the solver

2 gps sounds good though, I get ~1.5 with gminer

provenceday

legendary

Activity: 1148

Merit: 1000

getting 2.12 GPS on 2080Ti card.

but a lot of rejected shares.

and miner is not very Stable too.

r0ver2

newbie

Activity: 6

Merit: 0

Quote from: BogdanCo on February 09, 2019, 06:48:38 AM

Still around 33% rejected shares with 1080ti on cuckatoo31 using bminer v14.3.0.

Same here, works fine on 2080Ti - but not my 1080Tis Sad

GustDK

newbie

Activity: 3

Merit: 0

@RealBminer
you could put in the next update that shows the ms connection to the pool, it is very helpful Wink

Grim

sr. member

Activity: 506

Merit: 252

This is an important point to note as Cuckatoo31 requires 14GB of GPU memory to accurately solve a graph cycle.
Nvidia GPU’s with "only" 11GB use a memory overflow optimization to solve Cuckatoo31 graphs, but that reduces actual mining performance by 30%.

BogdanCo

hero member

Activity: 729

Merit: 513

Still around 33% rejected shares with 1080ti on cuckatoo31 using bminer v14.3.0.

Newton90

sr. member

Activity: 463

Merit: 256

what bminer fee when mining aeternity?

RivAngE

full member

Activity: 728

Merit: 169

What doesn't kill you, makes you stronger

No answer on the error?

"Insufficient memory 9171.7 MB available on device (#0). Unable to run the solver"

Yes, I'm using Windows 10, but with 11GB from the GPU and the used memory being less than 500MB before the miner starts, there shouldn't be a problem.

UnclWish

sr. member

Activity: 1484

Merit: 253

Will miner support c29 and c31 for AMD cards? Nicehash?

yuzuak

member

Activity: 683

Merit: 16

@realbminer 8 gb c31 please

arielbit

legendary

Activity: 3444

Merit: 1061

c31 on win7 (1080ti's)

3 card rig ~0.7 to ~0.8 (per card)

2 card rig ~0.98 (per card)

1 card rig ~1.33 (per card)

george2019

jr. member

Activity: 83

Merit: 3

well 14.3 VS 14.0:

https://i.imgur.com/u6atqRa.png

https://i.imgur.com/qglZGxH.png

with following settings : TDP70%:
3X1080 EVGA FTW core oc -50 memory oc +500 (core operates around 1900MHZ using second bios)
1X1080 MSI gamer x core oc 0 memory oc +500 (core operates around 1800MHZ)
1X 1080Ti zotac amp core oc +120 memory oc +500 (core operates around 1700MHZ)

https://i.imgur.com/27bDGQD.jpg

pagefile 32gb on 60gb ssd (10gb free space)

i mined on f2pool and daily average recorded hashrate was 31g/sec

CPU usage is still quite big even with latest build but hashrate dropped, 14.0 build has around 50% cpu usage on my rig, but hashrate is higher than newer builds, rejected shares was around 0.8% daily, using latest nvidia drivers

Juniormkl

newbie

Activity: 155

Merit: 0

Bminer 14.3.0 added to https://www.minermonitoring.com/

Join our discord https://discord.gg/aGGaeqq

also, you can check the speed of the miner on different rigs using the benchmark page: https://minermonitoring.com/benchmark

cryptoyes

member

Activity: 297

Merit: 10

Quote from: realbminer on February 08, 2019, 09:26:23 PM

Quote from: cryptoyes on February 08, 2019, 09:13:12 PM

Quote from: george2019 on February 07, 2019, 11:52:04 AM

14.0 build is still fastest on my rig on c29 algo, around 17.2g hashrate vs 16.5g on 14.1-14.2

Same here. 14.1 and 14.2 are slower than 14.0. I tried all values for intensity on 14.2 as well.

That's unexpected. What's the configuration? I'll try to reproduce.

Ubuntu 16.04. 8GB ram. G4600 3.4GHz or G3930 2.9GHz. Nvidia 415.27. CUDA 10.0. GTX1070, GTX1070Ti, GTX1080Ti.

Same results regardless of the hardware combination. On v14.x (14.0, 14.1, 14.2) I occasionally also get SIGSEGV errors when the pool disconnects. I reported this to you twice but you never replied:

Code:

[WARN] [2019-02-08T17:04:02+02:00] Get error: End of file, resetting in 5 seconds
[INFO] [2019-02-08T17:04:07+02:00] Connected to eu-de02.miningrigrentals.com:3322
[INFO] [2019-02-08T17:04:08+02:00] Authorized with the server
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x8 pc=0x753ee6]
[WARN] [2019-02-08T17:04:10+02:00] Miner died! It will be restarted soon...

Ginooo

newbie

Activity: 14

Merit: 0

Quote from: realbminer on February 08, 2019, 09:33:48 PM

Quote from: freedom777 on February 08, 2019, 05:07:58 PM

Quote from: twente-mining on February 07, 2019, 04:26:35 AM

Grin31 with 1080ti version 14.2.0 give me errors

Insufficient memory 9171,7 MB available on device (#0). unable to run the solver
Miner died!

+++Yes, i geting this too

Currently the miner requires almost all the memory in order to work efficiently. Unfortunately Windows 10 take at least 15% of the VRAM of the card so it won't work.

It should be fine if you try Windows 7 or Linux.

1080ti VRAM is 11GB

realbminer

member

Activity: 461

Merit: 49

Quote from: freedom777 on February 08, 2019, 05:07:58 PM

Quote from: twente-mining on February 07, 2019, 04:26:35 AM

Grin31 with 1080ti version 14.2.0 give me errors

Insufficient memory 9171,7 MB available on device (#0). unable to run the solver
Miner died!

+++Yes, i geting this too

Currently the miner requires almost all the memory in order to work efficiently. Unfortunately Windows 10 take at least 15% of the VRAM of the card so it won't work.

It should be fine if you try Windows 7 or Linux.

realbminer

member

Activity: 461

Merit: 49

Quote from: cryptoyes on February 08, 2019, 09:13:12 PM

Quote from: george2019 on February 07, 2019, 11:52:04 AM

14.0 build is still fastest on my rig on c29 algo, around 17.2g hashrate vs 16.5g on 14.1-14.2

Same here. 14.1 and 14.2 are slower than 14.0. I tried all values for intensity on 14.2 as well.

That's unexpected. What's the configuration? I'll try to reproduce.

cryptoyes

member

Activity: 297

Merit: 10

Quote from: george2019 on February 07, 2019, 11:52:04 AM

14.0 build is still fastest on my rig on c29 algo, around 17.2g hashrate vs 16.5g on 14.1-14.2

Same here. 14.1 and 14.2 are slower than 14.0. I tried all values for intensity on 14.2 as well.

Topic: [ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9 - page 52. (Read 148347 times)