Topic: [ANN][BQC][P2pool] - First BBQCoin P2Pool - http://bbq.crabdance.com:8900 - page 2. (Read 3199 times)
May 07, 2013, 02:10:56 PM
thank you for another BBQ pool, very much liking the support this coin is getting
May 07, 2013, 02:07:08 PM
BBQCoin P2Pool Server:
Server:
http://bbq.crabdance.com:8900
Mining User: Your BBQCoin Address
Mining Pass: Anything
cgminer example:
Tip:
Ensure the above cgminer settings are applied to get the lowest reject rates: run cgminer then press S and check that Scantime is 1, Expiry is 1 and Queue is 0, if not press S again and change Scantime to 1, press E to change Expiry to 1 and press Q to change Queue to 0. If all settings are correct it should look like this:
cudaminer example:
cpuminer example:
Dont know how to setup your miner? See this thread for AMD GPUs https://bitcointalksearch.org/topic/consolidated-litecoin-mining-guide-for-5xxx-6xxx-and-7xxx-gpus-117221
When mining on BBQ Pools you can follow the litecoin instructions and just change the pool adress to a BBQ pool
Server:
http://bbq.crabdance.com:8900
- based on latest 11.4 P2Pool
- if you want to connect your own p2pool node look here for info https://bitcointalksearch.org/topic/m.2062610
- P2Pool uses a PPLNS based system, so payouts take a while to ramp up
- 50MH/s on the P2Pool network now
- 3% Fee
Mining User: Your BBQCoin Address
Mining Pass: Anything
cgminer example:
Quote
cgminer --scrypt -o bbq.crabdance.com:8900 -u yourBBQaddress -p x -s 1 --expiry 1 --gpu-threads 1 --queue 0
Tip:
Ensure the above cgminer settings are applied to get the lowest reject rates: run cgminer then press S and check that Scantime is 1, Expiry is 1 and Queue is 0, if not press S again and change Scantime to 1, press E to change Expiry to 1 and press Q to change Queue to 0. If all settings are correct it should look like this:
Code:
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 74.0C 2091RPM | 210.7K/211.5Kh/s | A: 60 R: 14 HW:0 U: 7.10/m I:16
--------------------------------------------------------------------------------
[Q]ueue: 0
[S]cantime: 1
[E]xpiry: 1
[W]rite config file
[C]gminer restart
Select an option or any other key to return
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 74.0C 2091RPM | 210.7K/211.5Kh/s | A: 60 R: 14 HW:0 U: 7.10/m I:16
--------------------------------------------------------------------------------
[Q]ueue: 0
[S]cantime: 1
[E]xpiry: 1
[W]rite config file
[C]gminer restart
Select an option or any other key to return
cudaminer example:
Quote
cudaminer -o bbq.crabdance.com:8900 -u yourBBQaddress -p x
cpuminer example:
Quote
minerd -o bbq.crabdance.com:8900 -u yourBBQaddress -p x
Dont know how to setup your miner? See this thread for AMD GPUs https://bitcointalksearch.org/topic/consolidated-litecoin-mining-guide-for-5xxx-6xxx-and-7xxx-gpus-117221
When mining on BBQ Pools you can follow the litecoin instructions and just change the pool adress to a BBQ pool
Jump to: