still asking where r 10 BTC:) 
Topic: [ANN][BTCZ] BitcoinZ - zkSNARKs 21b max POW-Zhash No-Premine No-Dev Tax - page 79. (Read 112207 times)
June 15, 2018, 06:31:15 PM
That is why i sold my few milion back at 32/29 still asking where r 10 BTC:)
still asking where r 10 BTC:) 
June 15, 2018, 06:05:26 PM
Hey, fellows! I rely this project will be advance and can be arrived the hard cap of ICO!
Welcome!
BitcoinZ has NO airdrop, premine, ICO!
It also has a 10 BTC donation that went who knows where and a price dropping faster then the Titanic
Check the old DGB charts. Expect to see it at 012 and don't come crying like a noob when that happens.
I fomo'ed at 046.
BTW. I had a party watching some guy telling he only get 32 sol where i get 300. Please correct that..
After that he will probably expect me to pay for his sugar bons.
He is however right.
I support BTCZ, but NO ONE is saying what happened to that donation!
Just fucking come forward with the truth.
Was it stolen? Is it stored to be used later? Or what?
I'm really annoyed that it's been so quiet about it.
I will start spamming this thread until we get an answer. I will ask on every page what happened.
I fucking hate secrets.
June 15, 2018, 06:02:18 PM
Who did the ZM.EXE miner? We need to contact him to also update the miner.
So Renuzit, from what I understand your miner is the only one that does CPU mining, correct?
So Renuzit, from what I understand your miner is the only one that does CPU mining, correct?
I believe ZM.EXE is DSTM. He said he needed 4 weeks to complete.
That is correct, ZHasher is the only known miner right now that can do CPU mining for ZHash.
June 15, 2018, 05:13:14 PM
So are any AMD cards going to work with new Algo. If so what memory are required for therm to function.Will it be any card over 3gb.
For AMD looks like we will need to wait for Claymore :/
June 15, 2018, 04:59:40 PM
So are any AMD cards going to work with new Algo. If so what memory are required for therm to function.Will it be any card over 3gb.
June 15, 2018, 01:31:52 PM
fyi -Just tested new algo with single fan evga 1050ti = 6-7 sols for a few min
didn't tweak settings
New ver 1.2.1 wallet working ok as well
Great work BTCZ Team!
didn't tweak settings
New ver 1.2.1 wallet working ok as well
Great work BTCZ Team!
June 15, 2018, 11:25:55 AM
I tested the following config against BitcoinZ's testnet and EWBF is rocking it pretty good. It supports BitcoinZ's flavor of Eh144,5. Just execute the following:
./miner --algo 144_5 --server mine-btcz-na.equipool.1ds.us --user tmWNpX6y9x4xFxg4NDkkajsVB4CxKx9sAgb.renuzit --pass x --port 49951 --pers BitcoinZ
I get about 32 Sol/s @ 140W with my 1070.
You can get EWBF here: https://bitcointalksearch.org/topic/ewbfs-cuda-equihash-miner-06-4466962
./miner --algo 144_5 --server mine-btcz-na.equipool.1ds.us --user tmWNpX6y9x4xFxg4NDkkajsVB4CxKx9sAgb.renuzit --pass x --port 49951 --pers BitcoinZ
I get about 32 Sol/s @ 140W with my 1070.
You can get EWBF here: https://bitcointalksearch.org/topic/ewbfs-cuda-equihash-miner-06-4466962
Who did the ZM.EXE miner? We need to contact him to also update the miner.
So Renuzit, from what I understand your miner is the only one that does CPU mining, correct?
June 15, 2018, 11:20:12 AM
I tested the following config against BitcoinZ's testnet and EWBF is rocking it pretty good. It supports BitcoinZ's flavor of Eh144,5. Just execute the following:
./miner --algo 144_5 --server mine-btcz-na.equipool.1ds.us --user tmWNpX6y9x4xFxg4NDkkajsVB4CxKx9sAgb.renuzit --pass x --port 49951 --pers BitcoinZ
I get about 32 Sol/s @ 140W with my 1070.
You can get EWBF here: https://bitcointalksearch.org/topic/ewbfs-cuda-equihash-miner-06-4466962
./miner --algo 144_5 --server mine-btcz-na.equipool.1ds.us --user tmWNpX6y9x4xFxg4NDkkajsVB4CxKx9sAgb.renuzit --pass x --port 49951 --pers BitcoinZ
I get about 32 Sol/s @ 140W with my 1070.
You can get EWBF here: https://bitcointalksearch.org/topic/ewbfs-cuda-equihash-miner-06-4466962
Whats the SOL ratio with the new algo?
For instance if my 1070 got 450sols before is it expected to get 32sols now?
As of 6/15 One x 1070 does 442 Sols and mines ~730 BTCz a day
As of 6/19 One x 1070 does 32 Sols and mines ~730 BTCz a day
June 15, 2018, 05:43:13 AM
Hey, fellows! I rely this project will be advance and can be arrived the hard cap of ICO!
Welcome!
BitcoinZ has NO airdrop, premine, ICO!
It also has a 10 BTC donation that went who knows where and a price dropping faster then the Titanic
Check the old DGB charts. Expect to see it at 012 and don't come crying like a noob when that happens.
I fomo'ed at 046.
BTW. I had a party watching some guy telling he only get 32 sol where i get 300. Please correct that..
After that he will probably expect me to pay for his sugar bons.
June 15, 2018, 04:44:42 AM
Hey, fellows! I rely this project will be advance and can be arrived the hard cap of ICO!
Welcome!
BitcoinZ has NO airdrop, premine, ICO!
It also has a 10 BTC donation that went who knows where and a price dropping faster then the Titanic
June 15, 2018, 12:54:44 AM
I tested the following config against BitcoinZ's testnet and EWBF is rocking it pretty good. It supports BitcoinZ's flavor of Eh144,5. Just execute the following:
./miner --algo 144_5 --server mine-btcz-na.equipool.1ds.us --user tmWNpX6y9x4xFxg4NDkkajsVB4CxKx9sAgb.renuzit --pass x --port 49951 --pers BitcoinZ
I get about 32 Sol/s @ 140W with my 1070.
You can get EWBF here: https://bitcointalksearch.org/topic/ewbfs-cuda-equihash-miner-06-4466962
Thank you for testing../miner --algo 144_5 --server mine-btcz-na.equipool.1ds.us --user tmWNpX6y9x4xFxg4NDkkajsVB4CxKx9sAgb.renuzit --pass x --port 49951 --pers BitcoinZ
I get about 32 Sol/s @ 140W with my 1070.
You can get EWBF here: https://bitcointalksearch.org/topic/ewbfs-cuda-equihash-miner-06-4466962
Hashrate is completely different with this version of EquiHash. No matter : it is the same difference for all.
June 15, 2018, 12:19:42 AM
Hey, fellows! I rely this project will be advance and can be arrived the hard cap of ICO!
Welcome!
BitcoinZ has NO airdrop, premine, ICO!
June 14, 2018, 11:17:41 PM
Hey, fellows! I rely this project will be advance and can be arrived the hard cap of ICO!
June 14, 2018, 10:46:27 PM
I tested the following config against BitcoinZ's testnet and EWBF is rocking it pretty good. It supports BitcoinZ's flavor of Eh144,5. Just execute the following:
./miner --algo 144_5 --server mine-btcz-na.equipool.1ds.us --user tmWNpX6y9x4xFxg4NDkkajsVB4CxKx9sAgb.renuzit --pass x --port 49951 --pers BitcoinZ
I get about 32 Sol/s @ 140W with my 1070.
You can get EWBF here: https://bitcointalksearch.org/topic/ewbfs-cuda-equihash-miner-06-4466962
./miner --algo 144_5 --server mine-btcz-na.equipool.1ds.us --user tmWNpX6y9x4xFxg4NDkkajsVB4CxKx9sAgb.renuzit --pass x --port 49951 --pers BitcoinZ
I get about 32 Sol/s @ 140W with my 1070.
You can get EWBF here: https://bitcointalksearch.org/topic/ewbfs-cuda-equihash-miner-06-4466962
June 14, 2018, 09:42:49 PM
@dafatboy,
Yeah, that's how it's going to have to happen.
I will resume release development. Some hash beat no hash any day of the week right?
Yeah, that's how it's going to have to happen.
I will resume release development. Some hash beat no hash any day of the week right?
June 14, 2018, 09:03:12 PM
Quote
ZhasherOS? Is this Linux?
Yes, ZhasherOS is a Micro Linux O/S trying to address the issue with 1060 GB cards don't work in Win10
https://bitcointalksearch.org/topic/m.40073261
Started development of this custom version 2 days ago. I've been developing and using the base O/S for a year now. But now customizing it to be Windows user friendly. Trying to get released before the fork. Don't want to lose 1060 3GB miners during the fork transition. Up until 2 hours ago I was getting ready to release with ample time for everyone to get their rigs set for the fork (algo change). Then ewbf releases. Not enough time to develop support for both. One or the other. That's where I am at with this.
Can you just release the one you have at the moment without EWBF? Then provide an updated version later?
I have a rig with 3X 1060 3GB I can test on. I also have another 13 GPU rig with 6X 1070 6GB and 7 X 1060 6GB.
June 14, 2018, 08:32:27 PM
Quote
ZhasherOS? Is this Linux?
Yes, ZhasherOS is a Micro Linux O/S trying to address the issue with 1060 GB cards don't work in Win10
https://bitcointalksearch.org/topic/m.40073261
Started development of this custom version 2 days ago. I've been developing and using the base O/S for a year now. But now customizing it to be Windows user friendly. Trying to get released before the fork. Don't want to lose 1060 3GB miners during the fork transition. Up until 2 hours ago I was getting ready to release with ample time for everyone to get their rigs set for the fork (algo change). Then ewbf releases. Not enough time to develop support for both. One or the other. That's where I am at with this.
June 14, 2018, 07:55:36 PM
So, ewbf has released a new miner. He has a good track record of good Kung Fu. Don't know if this is as good though. He claims faster. But to early to know if stable or not. My problem is I'm running out of time here. Arrgghhh! His timing totally sucks though! I'm trying to get the ZhasherOS released! LIKE NOW!!! I can't support both on the next release. Both will be included but only one supported out of the box. We KNOW Zhasher is working here and now. I don't own a 1060 3GB to confirm ewbf works or not. I really need someone linux aware with a 1060 3GB to download it and verify. And also some big GTX cards as well. And I need it QUICK!!! Can anybody help. Otherwise I feel it is better to release with a known working image. I know I'm new here. But PLEASE HELP if you can! We got 2 days and the users will have to download,burn and configure to be ready before the switch.
I cannot understand you. Why panic?
ZhasherOS? Is this Linux?
OS should use less than (<) 1 GB. Just run EWBF after block 160000. If memory leak or freeze, contact EWBF_. He fix quick, quick.
He fixes until bored then disappears.
June 14, 2018, 07:44:48 PM
June 14, 2018, 07:37:14 PM
So, ewbf has released a new miner. He has a good track record of good Kung Fu. Don't know if this is as good though. He claims faster. But to early to know if stable or not. My problem is I'm running out of time here. Arrgghhh! His timing totally sucks though! I'm trying to get the ZhasherOS released! LIKE NOW!!! I can't support both on the next release. Both will be included but only one supported out of the box. We KNOW Zhasher is working here and now. I don't own a 1060 3GB to confirm ewbf works or not. I really need someone linux aware with a 1060 3GB to download it and verify. And also some big GTX cards as well. And I need it QUICK!!! Can anybody help. Otherwise I feel it is better to release with a known working image. I know I'm new here. But PLEASE HELP if you can! We got 2 days and the users will have to download,burn and configure to be ready before the switch.
Jump to: