Pages:
Author

Topic: [ANN][BTX] Bitcoin - The NeXt Generation /NEW ANN and WEBSITE ! - page 17. (Read 83733 times)

full member
Activity: 196
Merit: 100
One more thing, can I get a step by step guide on setting up a masternode. I have enough funds , I created the masternode, but I dont know how to collateralize it. When I click on Masternode , then start, it says "could not allocate vin". Do I just need to send the 275k to the new address of the masternode and then start it? Anyone?

Prometheus will make a guide  Wink

Sry my health dont allow me to sit longer then 5min at my PC

For the first ppls, use the guide from icash masternodes (page 16/17) until i can create it for us
The only change is that u have to send 250000 BTX to the MN address, all other stuff is the same

And dont forget to set "staking=0" in ur conf file.

Hey PrometheusX can you please provide a link to this icash masternode guide? I've just read the OP at the icash ANN thread and, while I can see that someone claimed a bounty for creating a masternode guide, I cannot find a link to it anywhere in the OP. I've also searched through that entire thread and again no link specifically, but there are a few posts giving instructions. It's all very piecemeal though. I'd like to be able to actually see this guide, read it through and go to page 16/17 like you're suggesting.

https://bitcointalksearch.org/topic/m.10930334

Code:
maxconnections=100
rpcuser=yourusername
rpcpassword=yourpassword
rpcallowip=*
rpcport=5515
staking=0
gen=0
listen=0
server=1
daemon=1
reservebalance=9999999
logtimestamps=1
masternodeaddr=YOURIPADDRESS:5515
masternode=1
masternodeprivkey=YOUR GENERATED PRIV KEY
addnode=107.170.57.24
addnode=85.25.214.214:28280
addnode=85.214.95.177:5515
addnode=85.214.95.177:5516
addnode=85.214.95.177:6517
addnode=85.214.95.177:6518

Thx Prometheus  Smiley

Still unable to get the masternode going. Anybody had any luck and can tell me how they did it. I pasted the coded from above, without the add nodes, using my own ip, user, etc. and it keeps telling me masternode=1 must be in the .conf

Pm me your email address and I invite you to our slack Wink

You will get faster support there
full member
Activity: 196
Merit: 100
It seems quite a few people haven't downloaded the latest wallet yet.


Please download it  Wink



http://85.214.95.177/btx-wallet/bitcointx-qt-2.1.1.zip
newbie
Activity: 56
Merit: 0
One more thing, can I get a step by step guide on setting up a masternode. I have enough funds , I created the masternode, but I dont know how to collateralize it. When I click on Masternode , then start, it says "could not allocate vin". Do I just need to send the 275k to the new address of the masternode and then start it? Anyone?

Prometheus will make a guide  Wink

Sry my health dont allow me to sit longer then 5min at my PC

For the first ppls, use the guide from icash masternodes (page 16/17) until i can create it for us
The only change is that u have to send 250000 BTX to the MN address, all other stuff is the same

And dont forget to set "staking=0" in ur conf file.

Hey PrometheusX can you please provide a link to this icash masternode guide? I've just read the OP at the icash ANN thread and, while I can see that someone claimed a bounty for creating a masternode guide, I cannot find a link to it anywhere in the OP. I've also searched through that entire thread and again no link specifically, but there are a few posts giving instructions. It's all very piecemeal though. I'd like to be able to actually see this guide, read it through and go to page 16/17 like you're suggesting.

https://bitcointalksearch.org/topic/m.10930334

Code:
maxconnections=100
rpcuser=yourusername
rpcpassword=yourpassword
rpcallowip=*
rpcport=5515
staking=0
gen=0
listen=0
server=1
daemon=1
reservebalance=9999999
logtimestamps=1
masternodeaddr=YOURIPADDRESS:5515
masternode=1
masternodeprivkey=YOUR GENERATED PRIV KEY
addnode=107.170.57.24
addnode=85.25.214.214:28280
addnode=85.214.95.177:5515
addnode=85.214.95.177:5516
addnode=85.214.95.177:6517
addnode=85.214.95.177:6518

Thx Prometheus  Smiley

Still unable to get the masternode going. Anybody had any luck and can tell me how they did it. I pasted the coded from above, without the add nodes, using my own ip, user, etc. and it keeps telling me masternode=1 must be in the .conf
full member
Activity: 196
Merit: 100
full member
Activity: 196
Merit: 100
I contacted Richiela. Let's see what he answers  Wink

full member
Activity: 196
Merit: 100
One more thing, can I get a step by step guide on setting up a masternode. I have enough funds , I created the masternode, but I dont know how to collateralize it. When I click on Masternode , then start, it says "could not allocate vin". Do I just need to send the 275k to the new address of the masternode and then start it? Anyone?

Prometheus will make a guide  Wink

Sry my health dont allow me to sit longer then 5min at my PC

For the first ppls, use the guide from icash masternodes (page 16/17) until i can create it for us
The only change is that u have to send 250000 BTX to the MN address, all other stuff is the same

And dont forget to set "staking=0" in ur conf file.

Hey PrometheusX can you please provide a link to this icash masternode guide? I've just read the OP at the icash ANN thread and, while I can see that someone claimed a bounty for creating a masternode guide, I cannot find a link to it anywhere in the OP. I've also searched through that entire thread and again no link specifically, but there are a few posts giving instructions. It's all very piecemeal though. I'd like to be able to actually see this guide, read it through and go to page 16/17 like you're suggesting.

https://bitcointalksearch.org/topic/m.10930334

Code:
maxconnections=100
rpcuser=yourusername
rpcpassword=yourpassword
rpcallowip=*
rpcport=5515
staking=0
gen=0
listen=0
server=1
daemon=1
reservebalance=9999999
logtimestamps=1
masternodeaddr=YOURIPADDRESS:5515
masternode=1
masternodeprivkey=YOUR GENERATED PRIV KEY
addnode=107.170.57.24
addnode=85.25.214.214:28280
addnode=85.214.95.177:5515
addnode=85.214.95.177:5516
addnode=85.214.95.177:6517
addnode=85.214.95.177:6518

Thx Prometheus  Smiley
full member
Activity: 168
Merit: 100
One more thing, can I get a step by step guide on setting up a masternode. I have enough funds , I created the masternode, but I dont know how to collateralize it. When I click on Masternode , then start, it says "could not allocate vin". Do I just need to send the 275k to the new address of the masternode and then start it? Anyone?

Prometheus will make a guide  Wink

Sry my health dont allow me to sit longer then 5min at my PC

For the first ppls, use the guide from icash masternodes (page 16/17) until i can create it for us
The only change is that u have to send 250000 BTX to the MN address, all other stuff is the same

And dont forget to set "staking=0" in ur conf file.

Hey PrometheusX can you please provide a link to this icash masternode guide? I've just read the OP at the icash ANN thread and, while I can see that someone claimed a bounty for creating a masternode guide, I cannot find a link to it anywhere in the OP. I've also searched through that entire thread and again no link specifically, but there are a few posts giving instructions. It's all very piecemeal though. I'd like to be able to actually see this guide, read it through and go to page 16/17 like you're suggesting.

https://bitcointalksearch.org/topic/m.10930334

Code:
maxconnections=100
rpcuser=yourusername
rpcpassword=yourpassword
rpcallowip=*
port=5515
rpcport=28282
staking=0
gen=0
listen=0
server=1
daemon=1
reservebalance=9999999
logtimestamps=1
masternodeaddr=YOURIPADDRESS:5515
masternode=1
masternodeprivkey=YOUR GENERATED PRIV KEY
addnode=107.170.57.24
addnode=85.25.214.214:28280
addnode=85.214.95.177:5515
addnode=85.214.95.177:5516
addnode=85.214.95.177:6517
addnode=85.214.95.177:6518
hero member
Activity: 658
Merit: 500
One more thing, can I get a step by step guide on setting up a masternode. I have enough funds , I created the masternode, but I dont know how to collateralize it. When I click on Masternode , then start, it says "could not allocate vin". Do I just need to send the 275k to the new address of the masternode and then start it? Anyone?

Prometheus will make a guide  Wink

Sry my health dont allow me to sit longer then 5min at my PC

For the first ppls, use the guide from icash masternodes (page 16/17) until i can create it for us
The only change is that u have to send 250000 BTX to the MN address, all other stuff is the same

And dont forget to set "staking=0" in ur conf file.

Hey PrometheusX can you please provide a link to this icash masternode guide? I've just read the OP at the icash ANN thread and, while I can see that someone claimed a bounty for creating a masternode guide, I cannot find a link to it anywhere in the OP. I've also searched through that entire thread and again no link specifically, but there are a few posts giving instructions. It's all very piecemeal though. I'd like to be able to actually see this guide, read it through and go to page 16/17 like you're suggesting.
legendary
Activity: 1148
Merit: 1000
Can someone post a detailed instructions on how to setup a MN?

Thanks
newbie
Activity: 56
Merit: 0
One more thing, can I get a step by step guide on setting up a masternode. I have enough funds , I created the masternode, but I dont know how to collateralize it. When I click on Masternode , then start, it says "could not allocate vin". Do I just need to send the 275k to the new address of the masternode and then start it? Anyone?

Prometheus will make a guide  Wink

Sry my health dont allow me to sit longer then 5min at my PC

For the first ppls, use the guide from icash masternodes (page 16/17) until i can create it for us
The only change is that u have to send 250000 BTX to the MN address, all other stuff is the same

And dont forget to set "staking=0" in ur conf file.

Keeps telling me to set masternode=1 in the .conf file     that is exactly what I did, fucking hate MN's
full member
Activity: 168
Merit: 100
One more thing, can I get a step by step guide on setting up a masternode. I have enough funds , I created the masternode, but I dont know how to collateralize it. When I click on Masternode , then start, it says "could not allocate vin". Do I just need to send the 275k to the new address of the masternode and then start it? Anyone?

Prometheus will make a guide  Wink

Sry my health dont allow me to sit longer then 5min at my PC

For the first ppls, use the guide from icash masternodes (page 16/17) until i can create it for us
The only change is that u have to send 250000 BTX to the MN address, all other stuff is the same

And dont forget to set "staking=0" in ur conf file.
full member
Activity: 196
Merit: 100
Guys weve come WAYYY to far to get delisted. Lets start buying!!

Vegas

We sure are a good community Smiley BTX goes forward ! And with Masternodes, to Bittrex !
legendary
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
Guys weve come WAYYY to far to get delisted. Lets start buying!!

Vegas
full member
Activity: 196
Merit: 100
Time to do some trading on C-Cex  Wink  https://c-cex.com/?p=btx-btc
full member
Activity: 196
Merit: 100
One more thing, can I get a step by step guide on setting up a masternode. I have enough funds , I created the masternode, but I dont know how to collateralize it. When I click on Masternode , then start, it says "could not allocate vin". Do I just need to send the 275k to the new address of the masternode and then start it? Anyone?

Prometheus will make a guide  Wink
legendary
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
One more thing, can I get a step by step guide on setting up a masternode. I have enough funds , I created the masternode, but I dont know how to collateralize it. When I click on Masternode , then start, it says "could not allocate vin". Do I just need to send the 275k to the new address of the masternode and then start it? Anyone?
legendary
Activity: 1610
Merit: 1003
"Yobit pump alert software" Link in my signature!
full member
Activity: 196
Merit: 100
What's new with update  2.1.0.0 ->  should probably be 2.1.1.0   Smiley

True, but 2.1.0.0 brought already everything except working MN due to bug.

So it's like 2.1.0.0 originally brought everything working. 2.1..1.0 is a fix  Wink
legendary
Activity: 1834
Merit: 1006
What's new with update  2.1.0.0 ->  should probably be 2.1.1.0   Smiley
Pages:
Jump to: