Let;s hope this will be my 8th block:
{"result":"deadline: 1175"}
{"height":"606","generationSignature"
{"result":"deadline: 1175"}
{"height":"606","generationSignature"
How you made this low deadline?
? I allways get more than 100k. 
Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 1275. (Read 2170889 times)
August 12, 2014, 01:07:33 PM
How you made this low deadline?
? I allways get more than 100k. August 12, 2014, 01:02:47 PM
Let;s hope this will be my 8th block:
{"result":"deadline: 1175"}
{"height":"606","generationSignature"
Nope
{"result":"deadline: 1175"}
{"height":"606","generationSignature"
Nope
August 12, 2014, 12:55:00 PM
Is it worth to create lower nnonces? Or just create from 100k? i only wanna use 4GB but i wanna mine some coin what are you think? And what is "deadline" int mining?
both can work... but i think 4G space ..it is too hard to mine a block...
How many will be enought?
The more, the better - the most, the best. There's no stats available yet I think, so you can't really say anything meaningful about this..
I've seen multiple numbers come across, up to 15TB. So obviously their chances are... considerably higher.
Well >10000k deadline is littlbit too much.
Yes, someone else will get it before you, most likely. However it's calculated (or dealt out, dunno) per block. So if you're lucky you'll get a lower one and be able to 'steal' the block.
August 12, 2014, 12:46:27 PM
Is it worth to create lower nnonces? Or just create from 100k? i only wanna use 4GB but i wanna mine some coin what are you think? And what is "deadline" int mining?
both can work... but i think 4G space ..it is too hard to mine a block...
How many will be enought?
August 12, 2014, 12:43:51 PM
Is it worth to create lower nnonces? Or just create from 100k? i only wanna use 4GB but i wanna mine some coin what are you think? And what is "deadline" int mining?
both can work... but i think 4G space ..it is too hard to mine a block...
August 12, 2014, 12:43:03 PM
Does anyone know if a java classpath variable needs to be set?
I keep getting this error:
Exception in thread "main" java.lang.NoClassDefFoundError: akka/actor/ActorSyste
m
at pocminer.POCMiner.startGenerate(POCMiner.java:65)
at pocminer.POCMiner.main(POCMiner.java:42)
Caused by: java.lang.ClassNotFoundException: akka.actor.ActorSystem
at java.net.URLClassLoader$1.run(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
... 2 more
Thanks for the help.
I keep getting this error:
Exception in thread "main" java.lang.NoClassDefFoundError: akka/actor/ActorSyste
m
at pocminer.POCMiner.startGenerate(POCMiner.java:65)
at pocminer.POCMiner.main(POCMiner.java:42)
Caused by: java.lang.ClassNotFoundException: akka.actor.ActorSystem
at java.net.URLClassLoader$1.run(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
... 2 more
Thanks for the help.
August 12, 2014, 12:41:20 PM
Is it worth to create lower nnonces? Or just create from 100k? i only wanna use 4GB but i wanna mine some coin what are you thiunk?
4gb is.. not a lot. Be prepared to do a whole lot of waiting, but hey, you might just get lucky! Simply start creating from 0, I don't assume there's any difference in 'efficiency' on higher nonces, unless you actually have more (size)
The amount of nonces you can generate on 4gb is around.. 1600. So you'll be at a pretty big disadvantage compared to some of the 10TB+ miners.
I know 4GB is not much ,but i not have 100$ for new HDDs and my HDDs are working fine so i not wanna get another. Who invest more get more back. This is the problem with every cryptocoin. There should be a coin where the lower hashrate get more coin. And is there somebody who know what is deadline means?
Lower hashrate, more coin? Interesting... people would just throttle their devices
But yes, making money with cryptocurrency is quite.. investment-based, unless you already own a good (gaming) pc... until ASICs come into play for said coin. Luckily that won't be a problem here.The 'Deadline' is assigned to you every block when it has not been found. If the block has not been found by anyone before the deadline passes, it will be given to the first person to reach the deadline (ie the person who had the lowest deadline number assigned to them). This is derived from something but I don't know what. It's been said earlier in this topic though.
Well >10000k deadline is littlbit too much.
August 12, 2014, 12:37:36 PM
Is it worth to create lower nnonces? Or just create from 100k? i only wanna use 4GB but i wanna mine some coin what are you thiunk?
4gb is.. not a lot. Be prepared to do a whole lot of waiting, but hey, you might just get lucky! Simply start creating from 0, I don't assume there's any difference in 'efficiency' on higher nonces, unless you actually have more (size)
The amount of nonces you can generate on 4gb is around.. 1600. So you'll be at a pretty big disadvantage compared to some of the 10TB+ miners.
I know 4GB is not much ,but i not have 100$ for new HDDs and my HDDs are working fine so i not wanna get another. Who invest more get more back. This is the problem with every cryptocoin. There should be a coin where the lower hashrate get more coin. And is there somebody who know what is deadline means?
Lower hashrate, more coin? Interesting... people would just throttle their devices
But yes, making money with cryptocurrency is quite.. investment-based, unless you already own a good (gaming) pc... until ASICs come into play for said coin. Luckily that won't be a problem here.The 'Deadline' is assigned to you every block when it has not been found. If the block has not been found by anyone before the deadline passes, it will be given to the first person to reach the deadline (ie the person who had the lowest deadline number assigned to them). This is derived from something but I don't know what. It's been said earlier in this topic though.
August 12, 2014, 12:31:28 PM
Is it worth to create lower nnonces? Or just create from 100k? i only wanna use 4GB but i wanna mine some coin what are you thiunk?
4gb is.. not a lot. Be prepared to do a whole lot of waiting, but hey, you might just get lucky! Simply start creating from 0, I don't assume there's any difference in 'efficiency' on higher nonces, unless you actually have more (size)
The amount of nonces you can generate on 4gb is around.. 1600. So you'll be at a pretty big disadvantage compared to some of the 10TB+ miners.
I know 4GB is not much ,but i not have 100$ for new HDDs and my HDDs are working fine so i not wanna get another. Who invest more get more back. This is the problem with every cryptocoin. There should be a coin where the lower hashrate get more coin.
Lol... lower hashrate gets more... interesting concept, but I doubt it will ever take off.
August 12, 2014, 12:30:33 PM
Is it worth to create lower nnonces? Or just create from 100k? i only wanna use 4GB but i wanna mine some coin what are you thiunk?
4gb is.. not a lot. Be prepared to do a whole lot of waiting, but hey, you might just get lucky! Simply start creating from 0, I don't assume there's any difference in 'efficiency' on higher nonces, unless you actually have more (size)
The amount of nonces you can generate on 4gb is around.. 1600. So you'll be at a pretty big disadvantage compared to some of the 10TB+ miners.
I know 4GB is not much ,but i not have 100$ for new HDDs and my HDDs are working fine so i not wanna get another. Who invest more get more back. This is the problem with every cryptocoin. There should be a coin where the lower hashrate get more coin. And is there somebody who know what is deadline means?
August 12, 2014, 12:26:01 PM
For those buying/selling, are you using escrow services? Any recommendations?
Also, if anyone wants to pm to me their info on buys/sells, I'll put together a price chart to see how things look so far. Just need amount, price traded (sat/burst), date/time. No IDs will be used.
Also, if anyone wants to pm to me their info on buys/sells, I'll put together a price chart to see how things look so far. Just need amount, price traded (sat/burst), date/time. No IDs will be used.
August 12, 2014, 12:19:32 PM
Is it worth to create lower nnonces? Or just create from 100k? i only wanna use 4GB but i wanna mine some coin what are you thiunk?
4gb is.. not a lot. Be prepared to do a whole lot of waiting, but hey, you might just get lucky! Simply start creating from 0, I don't assume there's any difference in 'efficiency' on higher nonces, unless you actually have more (size)
The amount of nonces you can generate on 4gb is around.. 1600. So you'll be at a pretty big disadvantage compared to some of the 10TB+ miners.
August 12, 2014, 12:16:57 PM
no one can post some stats?
August 12, 2014, 12:16:18 PM
One last thing... While I was messing around I started a second run_generate starting at 0 as well, I didn't let it run very long, but it did start... will that have caused any issues?
August 12, 2014, 12:13:15 PM
Is it worth to create lower nnonces? Or just create from 100k? i only wanna use 4GB but i wanna mine some coin what are you think? And what is "deadline" int mining?
August 12, 2014, 12:12:59 PM
I guess basically all I need to know, is how to add more hard drive space to the mining... or whatever you would call it...
Do I start over with 800001, or do I make a new one with 64000000 or something else larger?
Do I start over with 800001, or do I make a new one with 64000000 or something else larger?
If on the same drive, then you would simply start another generation beginning with the plot number after your last one (taken from the plot folder).
If on a second drive, you will have to generate a new series of plots (so you can start at 0 again) and then start a new instance of the miner on that drive...
Someone correct me if I'm wrong, but I thought I saw somewhere (way) up thread that stated if you have two separate drives (and instances) mining to the same wallet, then the plot numbers should not overlap, i.e. they both shouldn't go from 0-800000, but instead one from 0-800000 and the other from 800001 to 160000.
August 12, 2014, 12:11:47 PM
Is my external IP actually supposed to show up in the 'peers' section of my wallet? Because if so, I'm doinitrong.
August 12, 2014, 12:09:59 PM
I guess basically all I need to know, is how to add more hard drive space to the mining... or whatever you would call it...
Do I start over with 800001, or do I make a new one with 64000000 or something else larger?
Do I start over with 800001, or do I make a new one with 64000000 or something else larger?
If on the same drive, then you would simply start another generation beginning with the plot number after your last one (taken from the plot folder).
If on a second drive, you will have to generate a new series of plots (so you can start at 0 again) and then start a new instance of the miner on that drive...
perfect, thank you!
August 12, 2014, 12:08:39 PM
cpu and ram efect in to the mining performance or only hard space?
cpu do not affect only ram is the one who affects
August 12, 2014, 12:07:29 PM
I guess basically all I need to know, is how to add more hard drive space to the mining... or whatever you would call it...
Do I start over with 800001, or do I make a new one with 64000000 or something else larger?
Do I start over with 800001, or do I make a new one with 64000000 or something else larger?
If on the same drive, then you would simply start another generation beginning with the plot number after your last one (taken from the plot folder).
If on a second drive, you will have to generate a new series of plots (so you can start at 0 again) and then start a new instance of the miner on that drive...
Jump to: