[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 1294.

jzhoulon

full member

Activity: 238

Merit: 100

Quote from: jzhoulon on August 11, 2014, 06:01:09 AM

Quote from: jzhoulon on August 11, 2014, 05:55:05 AM

Quote from: paulthetafy on August 11, 2014, 05:36:00 AM

Quote from: jzhoulon on August 11, 2014, 05:34:02 AM

Quote from: KriszDev on August 11, 2014, 05:24:49 AM

Quote from: jzhoulon on August 11, 2014, 05:20:56 AM

if there is two disk,disk0 and disk1 , how can i tell the miner the other disk's plots? or I need to setup two miners? if setup two miner , 1TB and 2 500GB which is faster Huh

Create link to the files http://technet.microsoft.com/en-us/library/cc753194.aspx.

thanks.and another question, if i create 100Gb plots, can i copy the plots to another disk directly? or i need to create another plots in disk?

I already asked that question earlier - no you cannot - you will be mining on duplicate data so will see no benefit

thanks,, if i use mklink , it should be hardlink or softlink?

seems softlink can't work normally Huh

and can't set up hardlink ethier

jzhoulon

full member

Activity: 238

Merit: 100

Quote from: jzhoulon on August 11, 2014, 05:55:05 AM

Quote from: paulthetafy on August 11, 2014, 05:36:00 AM

Quote from: jzhoulon on August 11, 2014, 05:34:02 AM

Quote from: KriszDev on August 11, 2014, 05:24:49 AM

Quote from: jzhoulon on August 11, 2014, 05:20:56 AM

if there is two disk,disk0 and disk1 , how can i tell the miner the other disk's plots? or I need to setup two miners? if setup two miner , 1TB and 2 500GB which is faster Huh

Create link to the files http://technet.microsoft.com/en-us/library/cc753194.aspx.

thanks.and another question, if i create 100Gb plots, can i copy the plots to another disk directly? or i need to create another plots in disk?

I already asked that question earlier - no you cannot - you will be mining on duplicate data so will see no benefit

thanks,, if i use mklink , it should be hardlink or softlink?

seems softlink can't work normally Huh

Vandalay23

sr. member

Activity: 341

Merit: 250

One more question

Let's say I wanna use 20gb of my drive
what will be the proper command to enter?

jzhoulon

full member

Activity: 238

Merit: 100

Quote from: paulthetafy on August 11, 2014, 05:36:00 AM

Quote from: jzhoulon on August 11, 2014, 05:34:02 AM

Quote from: KriszDev on August 11, 2014, 05:24:49 AM

Quote from: jzhoulon on August 11, 2014, 05:20:56 AM

if there is two disk,disk0 and disk1 , how can i tell the miner the other disk's plots? or I need to setup two miners? if setup two miner , 1TB and 2 500GB which is faster Huh

Create link to the files http://technet.microsoft.com/en-us/library/cc753194.aspx.

thanks.and another question, if i create 100Gb plots, can i copy the plots to another disk directly? or i need to create another plots in disk?

I already asked that question earlier - no you cannot - you will be mining on duplicate data so will see no benefit

thanks,, if i use mklink , it should be hardlink or softlink?

Vandalay23

sr. member

Activity: 341

Merit: 250

Quote from: CryptoHobo on August 11, 2014, 05:51:36 AM

Quote from: Vandalay23 on August 11, 2014, 05:47:39 AM

Quote from: Vandalay23 on August 11, 2014, 05:38:38 AM

Still can't get address.

Using windows 7.
When I run "run_dump_address" as admin, it doesn't create address.txt
when I run it as a normal user it creates a blank address.txt

Used in passphrases.txt the 12 word combination from wallet.
Even installed everything from scratch to get a new passphrase, still acts the same.

Any solution??

Edit: found the problem.
"java is not recognized as an internal or external command"...

Any quick setup for this? or shall i dig the java pages?

add java dir to your path

Done !
Thank you all!

Have address - Let's roll

CryptoHobo

legendary

Activity: 1050

Merit: 1000

Quote from: Vandalay23 on August 11, 2014, 05:47:39 AM

Quote from: Vandalay23 on August 11, 2014, 05:38:38 AM

Still can't get address.

Using windows 7.
When I run "run_dump_address" as admin, it doesn't create address.txt
when I run it as a normal user it creates a blank address.txt

Used in passphrases.txt the 12 word combination from wallet.
Even installed everything from scratch to get a new passphrase, still acts the same.

Any solution??

Edit: found the problem.
"java is not recognized as an internal or external command"...

Any quick setup for this? or shall i dig the java pages?

add java dir to your path

KriszDev

sr. member

Activity: 364

Merit: 250

Quote from: paulthetafy on August 11, 2014, 05:35:11 AM

Okay so I'm up and mining and now finding shares. I've found a few potential blocks i.e. I have deadlines, but the last one was {"result":"deadline: 784233"}
Does this really mean I need to wait 784233 seconds / 9.0768 days before I can see whether that share is accepted?

I found 2 shares. But no payout from block.

KriszDev

sr. member

Activity: 364

Merit: 250

Quote from: Vandalay23 on August 11, 2014, 05:47:39 AM

Quote from: Vandalay23 on August 11, 2014, 05:38:38 AM

Still can't get address.

Using windows 7.
When I run "run_dump_address" as admin, it doesn't create address.txt
when I run it as a normal user it creates a blank address.txt

Used in passphrases.txt the 12 word combination from wallet.
Even installed everything from scratch to get a new passphrase, still acts the same.

Any solution??

Edit: found the problem.
"java is not recognized as an internal or external command"...

Any quick setup for this? or shall i dig the java pages?

Add where_java_installed_path/bin to the PATH variable. (Edit envinorment varaibles).

Vandalay23

sr. member

Activity: 341

Merit: 250

Quote from: Vandalay23 on August 11, 2014, 05:38:38 AM

Still can't get address.

Using windows 7.
When I run "run_dump_address" as admin, it doesn't create address.txt
when I run it as a normal user it creates a blank address.txt

Used in passphrases.txt the 12 word combination from wallet.
Even installed everything from scratch to get a new passphrase, still acts the same.

Any solution??

Edit: found the problem.
"java is not recognized as an internal or external command"...

Any quick setup for this? or shall i dig the java pages?

uray

hero member

Activity: 1400

Merit: 505

LUCKY BASTARD !

how did he found 2 consecutive blocks !??

uray

hero member

Activity: 1400

Merit: 505

Quote from: paulthetafy on August 11, 2014, 05:26:03 AM

Quote from: uray on August 11, 2014, 05:16:03 AM

Quote from: ?? on ??

I want to buy at around 20 satoshi please pm me.

i will sell around 200k satoshi, if u r interested pm me

200k satoshi? that's 20 BTC per block? Ummm I think you might be aiming a little high there. That would give this coin a market cap of 1.74m after 148 blocks lol
I think 200 satoshi is nearer the mark,

well BTC is 25 BTC / block, and its not shitcoin, how about 20k sat ?

uray

hero member

Activity: 1400

Merit: 505

Quote from: paulthetafy on August 11, 2014, 05:36:00 AM

Quote from: jzhoulon on August 11, 2014, 05:34:02 AM

Quote from: KriszDev on August 11, 2014, 05:24:49 AM

Quote from: jzhoulon on August 11, 2014, 05:20:56 AM

if there is two disk,disk0 and disk1 , how can i tell the miner the other disk's plots? or I need to setup two miners? if setup two miner , 1TB and 2 500GB which is faster Huh

Create link to the files http://technet.microsoft.com/en-us/library/cc753194.aspx.

thanks.and another question, if i create 100Gb plots, can i copy the plots to another disk directly? or i need to create another plots in disk?

I already asked that question earlier - no you cannot - you will be mining on duplicate data so will see no benefit

how about using same address but different first_nonce for each plot ? will it has any benefit?

Vandalay23

sr. member

Activity: 341

Merit: 250

Still can't get address.

Using windows 7.
When I run "run_dump_address" as admin, it doesn't create address.txt
when I run it as a normal user it creates a blank address.txt

Used in passphrases.txt the 12 word combination from wallet.
Even installed everything from scratch to get a new passphrase, still acts the same.

Any solution??

paulthetafy

hero member

Activity: 820

Merit: 1000

Quote from: jzhoulon on August 11, 2014, 05:34:02 AM

Quote from: KriszDev on August 11, 2014, 05:24:49 AM

Quote from: jzhoulon on August 11, 2014, 05:20:56 AM

if there is two disk,disk0 and disk1 , how can i tell the miner the other disk's plots? or I need to setup two miners? if setup two miner , 1TB and 2 500GB which is faster Huh

Create link to the files http://technet.microsoft.com/en-us/library/cc753194.aspx.

thanks.and another question, if i create 100Gb plots, can i copy the plots to another disk directly? or i need to create another plots in disk?

I already asked that question earlier - no you cannot - you will be mining on duplicate data so will see no benefit

paulthetafy

hero member

Activity: 820

Merit: 1000

Okay so I'm up and mining and now finding shares. I've found a few potential blocks i.e. I have deadlines, but the last one was {"result":"deadline: 784233"}
Does this really mean I need to wait 784233 seconds / 9.0768 days before I can see whether that share is accepted?

jzhoulon

full member

Activity: 238

Merit: 100

Quote from: KriszDev on August 11, 2014, 05:24:49 AM

Quote from: jzhoulon on August 11, 2014, 05:20:56 AM

if there is two disk,disk0 and disk1 , how can i tell the miner the other disk's plots? or I need to setup two miners? if setup two miner , 1TB and 2 500GB which is faster Huh

Create link to the files http://technet.microsoft.com/en-us/library/cc753194.aspx.

thanks.and another question, if i create 100Gb plots, can i copy the plots to another disk directly? or i need to create another plots in disk?

paulthetafy

hero member

Activity: 820

Merit: 1000

Quote from: uray on August 11, 2014, 05:16:03 AM

Quote from: ?? on ??

I want to buy at around 20 satoshi please pm me.

i will sell around 200k satoshi, if u r interested pm me

200k satoshi? that's 20 BTC per block? Ummm I think you might be aiming a little high there. That would give this coin a market cap of 1.74m after 148 blocks lol
I think 200 satoshi is nearer the mark,

KriszDev

sr. member

Activity: 364

Merit: 250

Quote from: jzhoulon on August 11, 2014, 05:20:56 AM

if there is two disk,disk0 and disk1 , how can i tell the miner the other disk's plots? or I need to setup two miners? if setup two miner , 1TB and 2 500GB which is faster Huh

Create link to the files http://technet.microsoft.com/en-us/library/cc753194.aspx.

Vandalay23

sr. member

Activity: 341

Merit: 250

Quote from: uray on August 11, 2014, 05:19:22 AM

Quote from: Vandalay23 on August 11, 2014, 05:16:57 AM

Quote from: uray on August 11, 2014, 05:15:12 AM

Quote from: Vandalay23 on August 11, 2014, 05:12:19 AM

Quote from: familiaverde on August 11, 2014, 05:02:40 AM

Quote from: Vandalay23 on August 11, 2014, 05:00:38 AM

Can't generate address.
address.txt is empty

What do i do wrong?

enter your wallet password in passphrases.txt and ran run_dump_adress

It's exactly what I did.
Enter the passphrase I got in the browser client.
Ran run_dump_address

address.txt was created but blank

r u sure u r entering passphares? its not ur account-id, its your login password, 32 character or longer, usually bunch of words, u paste those words into address.txt

I did exactly that.
Entered this bunch of words that I use to login to my wallet.
is there a specific way to enter them? prefix/suffix?
I entered the words as they are, saved the passphrases.txt
and them ran the run_dump_address

no specific ways, just pure those words, i entered without new line, or perhaps u dont have permission to write to disk? r u using linux or windows?

windows.

jzhoulon

full member

Activity: 238

Merit: 100

if there is two disk,disk0 and disk1 , how can i tell the miner the other disk's plots? or I need to setup two miners? if setup two miner , 1TB and 2 500GB which is faster Huh

Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 1294. (Read 2171091 times)