[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 801.

mark.ti

newbie

Activity: 28

Merit: 0

Quote from: enta2k on September 16, 2014, 04:45:59 AM

Quote from: mark.ti on September 16, 2014, 04:33:31 AM

Quote from: cyberspacemonkey on September 15, 2014, 09:56:19 PM

These are my parameters:

gpuPlotGenerator.exe generate 0 0 "E:\plots" 11113333444455566 15100000 7368000 8000 64 1024

What am I doing wrong here?

Try:

gpuPlotGenerator.exe generate 0 0 "E:\plots" 11113333444455566 15100000 7368000 4000 256 8160

Which card do you use?

I theoraticly could use 256, but with 128 i´m almost 3 times faster.

I'm using 280x with modded kernel. I'm getting about 19000 nonces/min.

jzhoulon

full member

Activity: 238

Merit: 100

Quote from: TwoFatNuts on September 16, 2014, 07:29:01 AM

Quote from: jzhoulon on September 16, 2014, 07:08:55 AM

Quote from: TwoFatNuts on September 16, 2014, 07:06:58 AM

So, I also have a problem

I've been mining for about a week with a little under 1TB on the v2 pool. Everything seems to be set up properly but I'm not getting any payouts. (can send/receive coins though)

I can see my acct id on the /users/ page but nothing under the /balance/ page. Miner has been running and is definitely submitting shares so I'm not sure what I'm missing.

Any advice??

Thanks

using wrong miner?

Hmm, using mine.bat in the pocminer_pool v1 folder. renamed my pass file too....not sure what else could be wrong.

i mean, did you use the right miner, dev's miner only can mine at dev's pool, uray's miner only at uray's pool, if you use wrong miner, the submitting shares is ignored

TwoFatNuts

newbie

Activity: 21

Merit: 0

Quote from: jzhoulon on September 16, 2014, 07:08:55 AM

Quote from: TwoFatNuts on September 16, 2014, 07:06:58 AM

So, I also have a problem

I've been mining for about a week with a little under 1TB on the v2 pool. Everything seems to be set up properly but I'm not getting any payouts. (can send/receive coins though)

I can see my acct id on the /users/ page but nothing under the /balance/ page. Miner has been running and is definitely submitting shares so I'm not sure what I'm missing.

Any advice??

Thanks

using wrong miner?

Hmm, using mine.bat in the pocminer_pool v1 folder. renamed my pass file too....not sure what else could be wrong.

jzhoulon

full member

Activity: 238

Merit: 100

Quote from: skymax on September 16, 2014, 07:07:44 AM

Quote from: jzhoulon on September 16, 2014, 06:51:21 AM

Quote from: skymax on September 16, 2014, 06:48:47 AM

How I can recover my ID account http://burst.cryptoport.io/acc/BURST-SLHG-PCZ5-3S5N-G7LGL ?

the only way is you put your own passphase, you must type wrong passphase, the passphase only generate one wallet address, you can't use the wallet address to find your passphase

I solve LOL, I trying to copy and paste the passphase from notepad many times with selection from left and from right... until I get old ID...
I check all spaces but all good, I don't know why..lol

you can try to delete the first character or last character, may be when you copy, you have copy with less characters..

jzhoulon

full member

Activity: 238

Merit: 100

Quote from: TwoFatNuts on September 16, 2014, 07:06:58 AM

So, I also have a problem

I've been mining for about a week with a little under 1TB on the v2 pool. Everything seems to be set up properly but I'm not getting any payouts. (can send/receive coins though)

I can see my acct id on the /users/ page but nothing under the /balance/ page. Miner has been running and is definitely submitting shares so I'm not sure what I'm missing.

Any advice??

Thanks

using wrong miner?

skymax

member

Activity: 63

Merit: 10

Quote from: jzhoulon on September 16, 2014, 06:51:21 AM

Quote from: skymax on September 16, 2014, 06:48:47 AM

How I can recover my ID account http://burst.cryptoport.io/acc/BURST-SLHG-PCZ5-3S5N-G7LGL ?

the only way is you put your own passphase, you must type wrong passphase, the passphase only generate one wallet address, you can't use the wallet address to find your passphase

I solve LOL, I trying to copy and paste the passphase from notepad many times with selection from left and from right... until I get old ID...
I check all spaces but all good, I don't know why..lol

jzhoulon

full member

Activity: 238

Merit: 100

seems that we will have lots of new features
thanks dev's hardworking

Basic pool support (done)
Improved pool support (done)
Advanced transactions(escrow, subscription, reserve funds then transfer not yet known portion later)
BurstId authentication system
Allow linking BurstId to burst account for transfers with spending limits.
DHT for off-chain services
Off-chain encrypted messaging and voip between burstid accounts
File storage(disclaimer: still figuring out a good way to do this. this will take a while.)

TwoFatNuts

newbie

Activity: 21

Merit: 0

So, I also have a problem

I've been mining for about a week with a little under 1TB on the v2 pool. Everything seems to be set up properly but I'm not getting any payouts. (can send/receive coins though)

I can see my acct id on the /users/ page but nothing under the /balance/ page. Miner has been running and is definitely submitting shares so I'm not sure what I'm missing.

Any advice??

Thanks

enta2k

full member

Activity: 294

Merit: 101

The Future of Security Tokens

So if you have some problems with mining, i can tell you a little story that will make you feel better.

Yesterday i downloadet a new pool miner, put it to the right folder, set everything up
and delete the old one (because who needs the old folder)
In the second i deleted the file i realised how fucking stupid i am, of cause i had my plot file
in the old pool miner folder.

With a mini heart attack i go to see my HDD´s hoping that not happened what i thought,
but there it was, a complete blank 6TB HDD.

So im actually plotting a new file, should be finished this minute, it was at 80% when i woke up.
With my cpu it would take almost a week, im happy that my gpu can get it done in 16h.

I almost jumped out of the window, that won´t happen again Cheesy

have a nice day.

jzhoulon

full member

Activity: 238

Merit: 100

Quote from: skymax on September 16, 2014, 06:48:47 AM

How I can recover my ID account http://burst.cryptoport.io/acc/BURST-SLHG-PCZ5-3S5N-G7LGL ?

the only way is you put your own passphase, you must type wrong passphase, the passphase only generate one wallet address, you can't use the wallet address to find your passphase

hawli

newbie

Activity: 18

Merit: 0

Any solution to huge amount of data being transfered by java.exe proccess? It's like 250mb per hour.
I think it's wallet server but I'm not really sure. Can I mine without my local wallet server constantly running?

skymax

member

Activity: 63

Merit: 10

How I can recover my ID account http://burst.cryptoport.io/acc/BURST-SLHG-PCZ5-3S5N-G7LGL ?

Hieu

newbie

Activity: 46

Merit: 0

Approximetly 0.2-0.3btc

ReDPoiSoN

hero member

Activity: 686

Merit: 500

Quote from: Hieu on September 16, 2014, 06:41:41 AM

Well that's too bad. Im going to try not crying

How many coin have you lost?

Hieu

newbie

Activity: 46

Merit: 0

Well that's too bad. Im going to try not crying

ReDPoiSoN

hero member

Activity: 686

Merit: 500

Quote from: Spartan10 on September 16, 2014, 06:28:21 AM

Quote from: ReDPoiSoN on September 16, 2014, 06:17:53 AM

Quote from: Hieu on September 16, 2014, 06:15:58 AM

Guys, I accidently sent my Burst from C-Cex to Bittrex using wrong adress.

Instead of BURST-XXXX-XXXX-XXXX-XXXX I used adress of message: 631817c708524026adxxxxxxxxxxxxxx348a4e9e267af.

Did I just lost all my Burst?

Yes..

And in every case, you cannot send Burst from C-Cex to Bittrex, because you need to put a message with a code provided by Bittrex in that transaction, and you cannot do this on C-Cex..

so I need send on my pc wallet and next send to bittrex?

Yes, and you need wallet 1.1.2

Please people, READ before send coin to Bittrex! Don't burn coins!

On Bittrex deposit page:

Quote from: HoldTheLine on September 16, 2014, 06:32:29 AM

All these people who didn't bother to read the clear warnings because they literally just couldn't wait to dump on Bittrex lol

Quite poetic that they should be undone by their own greed and lose their loot. Maybe next time they will read the instructions before trying to dump their load.

+1

HoldTheLine

member

Activity: 112

Merit: 10

All these people who didn't bother to read the clear warnings because they literally just couldn't wait to dump on Bittrex lol

Quite poetic that they should be undone by their own greed and lose their loot. Maybe next time they will read the instructions before trying to dump their load.

Spartan10

sr. member

Activity: 252

Merit: 250

Quote from: ReDPoiSoN on September 16, 2014, 06:17:53 AM

Quote from: Hieu on September 16, 2014, 06:15:58 AM

Guys, I accidently sent my Burst from C-Cex to Bittrex using wrong adress.

Instead of BURST-XXXX-XXXX-XXXX-XXXX I used adress of message: 631817c708524026adxxxxxxxxxxxxxx348a4e9e267af.

Did I just lost all my Burst?

Yes..

And in every case, you cannot send Burst from C-Cex to Bittrex, because you need to put a message with a code provided by Bittrex in that transaction, and you cannot do this on C-Cex..

so I need send on my pc wallet and next send to bittrex?

pcshared

newbie

Activity: 28

Merit: 0

Change the editor

ReDPoiSoN

hero member

Activity: 686

Merit: 500

Quote from: Hieu on September 16, 2014, 06:15:58 AM

Guys, I accidently sent my Burst from C-Cex to Bittrex using wrong adress.

Instead of BURST-XXXX-XXXX-XXXX-XXXX I used adress of message: 631817c708524026adxxxxxxxxxxxxxx348a4e9e267af.

Did I just lost all my Burst?

Yes..

And in every case, you cannot send Burst from C-Cex to Bittrex, because you need to put a message with a code provided by Bittrex in that transaction, and you cannot do this on C-Cex..

Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 801. (Read 2171056 times)