[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 870.

bipben

member

Activity: 60

Merit: 10

Quote from: IncludeBeer on September 10, 2014, 09:05:56 PM

Trying the new gpu plotter....

my config...

Code:

gpuPlotGenerator generate 0 0 plots 4163282010088137402 15662000 20480 500 64 128
PAUSE

The error I get says "[-54] Error in step1 kernel launch" It does this after "Setting OpenCL step3 kernel static arguments"

Any ideas? Is my config bad, I started with pretty low numbers. I should also mention I'm plotting on my cpu right now with 4 cores (i2720qm), and have 2/8 gb free.

The -54 is the "CL_INVALID_WORK_GROUP_SIZE" error. It is related to your parameter. Different values for this parameter may solve your actual problem.

LivsUA

full member

Activity: 210

Merit: 100

Quote from: jzhoulon on September 11, 2014, 03:50:30 AM

Quote from: Amph on September 11, 2014, 03:46:30 AM

Quote from: BurstBurst on September 11, 2014, 03:42:57 AM

For the past few week, difficulty increase about 15% per day. If we take this into calculation than everyday we will get less share coin per day since more people mining this now.

Well, I'm might need to order more HDD (8-16 more) soon.

lol, i don't think the diff will increase regardless, it will stop at some point, unless the price will follow too

with more exchange it pushed, more people will know this coin, and more people will mine this...price is nothing, because the cost for mining burst can be ignored. it didn't need huge power supply and with no noise, burst is just free money

Two more weeks and with my 1 TB (separate PC) i would mine zero bursts Cheesy

jzhoulon

full member

Activity: 238

Merit: 100

Quote from: Amph on September 11, 2014, 03:46:30 AM

Quote from: BurstBurst on September 11, 2014, 03:42:57 AM

For the past few week, difficulty increase about 15% per day. If we take this into calculation than everyday we will get less share coin per day since more people mining this now.

Well, I'm might need to order more HDD (8-16 more) soon.

lol, i don't think the diff will increase regardless, it will stop at some point, unless the price will follow too

with more exchange it pushed, more people will know this coin, and more people will mine this...price is nothing, because the cost for mining burst can be ignored. it didn't need huge power supply and with no noise, burst is just free money

LivsUA

full member

Activity: 210

Merit: 100

Quote from: mark.ti on September 11, 2014, 03:27:59 AM

Quote from: Cr@zyheo on September 11, 2014, 02:49:43 AM

Can i copy or clone plot files to other HDD (or computers) and use these plot files for mining? Sad

It isn't possible. You have to generate new plots for every hard drive.

You need to have plots without overlaping nonces

so you generate like this

1x ---> 2x
2.1x---->3x
3.1x--->4x

LivsUA

full member

Activity: 210

Merit: 100

Quote from: SpeedDemon13 on September 11, 2014, 03:40:23 AM

Quote from: Sglasio on September 11, 2014, 03:35:26 AM

Quote from: SpeedDemon13 on September 11, 2014, 02:45:47 AM

Quote from: Sglasio on September 11, 2014, 02:38:33 AM

Quote from: SpeedDemon13 on September 11, 2014, 02:25:30 AM

Quote from: Sglasio on September 11, 2014, 02:23:06 AM

7000 nonces/min from my r9 280x , it's ok or too small?

My 7970 does 11.5k~11.7k nonces/min, 7970 is about the same as a 280x.

Try 3072 for stagger size, 128 thread and 8160 hashes.

i try, but i have error -61 Buffer cannot create... bla bla bla (((

Try a lower stagger size, maybe 2048.

i try 2048, 3079, 3192, 4096 .... result wich one... -61 error

Maybe reinstall the driver and APP SDK. Use DDU driver cleaner, before reinstalling. Are you using AMD 13.9 driver or 14.x driver? I'm using 13.9 with 2.9.1 APP SDK.

This command line works for me:

gpuPlotGenerator.exe generate 0 0 plots 1097617453xxxxx23 0 1000 4091 128 8160
pause

Drivers. 14.4 or 14.7 ..

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: BurstBurst on September 11, 2014, 03:42:57 AM

For the past few week, difficulty increase about 15% per day. If we take this into calculation than everyday we will get less share coin per day since more people mining this now.

Well, I'm might need to order more HDD (8-16 more) soon.

lol, i don't think the diff will increase regardless, it will stop at some point, unless the price will follow too

BurstBurst

full member

Activity: 494

Merit: 100

For the past few week, difficulty increase about 15% per day. If we take this into calculation than everyday we will get less share coin per day since more people mining this now.

Well, I'm might need to order more HDD (8-16 more) soon.

SpeedDemon13

hero member

Activity: 518

Merit: 500

Quote from: Sglasio on September 11, 2014, 03:35:26 AM

Quote from: SpeedDemon13 on September 11, 2014, 02:45:47 AM

Quote from: Sglasio on September 11, 2014, 02:38:33 AM

Quote from: SpeedDemon13 on September 11, 2014, 02:25:30 AM

Quote from: Sglasio on September 11, 2014, 02:23:06 AM

7000 nonces/min from my r9 280x , it's ok or too small?

My 7970 does 11.5k~11.7k nonces/min, 7970 is about the same as a 280x.

Try 3072 for stagger size, 128 thread and 8160 hashes.

i try, but i have error -61 Buffer cannot create... bla bla bla (((

Try a lower stagger size, maybe 2048.

i try 2048, 3079, 3192, 4096 .... result wich one... -61 error

Maybe reinstall the driver and APP SDK. Use DDU driver cleaner, before reinstalling. Are you using AMD 13.9 driver or 14.x driver? I'm using 13.9 with 2.9.1 APP SDK.

BurstBurst

full member

Activity: 494

Merit: 100

Time to Join DEV V2 pool.

Quote from: unsoindovo on September 11, 2014, 03:20:45 AM

Quote from: Prelude on September 11, 2014, 03:05:11 AM

You guys should stop dicking around with pool mining, I'm doing much better since I switched to solo mining yesterday. Let the pool operators get everything straight, until then enjoy solo mining.

are you saying you are able to find block in solo?

12TB plotted here and 0 in 30 hours!

i switch to pool..

SpeedDemon13

hero member

Activity: 518

Merit: 500

Quote from: bipben on September 11, 2014, 03:15:13 AM

Quote from: bitminer82 on September 10, 2014, 06:50:30 PM

Thanks Bipben for the GPU generator and your hard work! I've gone ahead and doubled your burst wallet balance for you.

Wow! Thanks a lot for your support

I will continue to enhance the plot generator. The next version will be centered on performance.
Some people pointed out that it would be great to be able to split the work between many graphic cards. I will add this feature to the roadmap.

v.2.0.0 seems solid, thanks....

Also, could you explain the relationship of the stagger size/hashes ratio? It was kind of vague to understand it.

unsoindovo

legendary

Activity: 1932

Merit: 1042

https://locktrip.com/?refId=40964

Quote from: duncan_idaho on September 11, 2014, 03:30:28 AM

People please separate hashpower to more pools. I can host one of pool in EU. Is pool code is open sourced ? Any howto ?

this would be a great thing !!!

update the state of project here plz!!!

Sglasio

full member

Activity: 224

Merit: 100

Quote from: SpeedDemon13 on September 11, 2014, 02:45:47 AM

Quote from: Sglasio on September 11, 2014, 02:38:33 AM

Quote from: SpeedDemon13 on September 11, 2014, 02:25:30 AM

Quote from: Sglasio on September 11, 2014, 02:23:06 AM

7000 nonces/min from my r9 280x , it's ok or too small?

My 7970 does 11.5k~11.7k nonces/min, 7970 is about the same as a 280x.

Try 3072 for stagger size, 128 thread and 8160 hashes.

i try, but i have error -61 Buffer cannot create... bla bla bla (((

Try a lower stagger size, maybe 2048.

i try 2048, 3079, 3192, 4096 .... result wich one... -61 error

duncan_idaho

sr. member

Activity: 355

Merit: 250

People please separate hashpower to more pools. I can host one of pool in EU. Is pool code is open sourced ? Any howto ?

mark.ti

newbie

Activity: 28

Merit: 0

Quote from: Cr@zyheo on September 11, 2014, 02:49:43 AM

Can i copy or clone plot files to other HDD (or computers) and use these plot files for mining? Sad

It isn't possible. You have to generate new plots for every hard drive.

mark.ti

newbie

Activity: 28

Merit: 0

I'm trying to compile gpuPlotGenerator under Linux, but unfortunately I got these errors:

Code:

g++: unrecognized option '-static-libstdc++'
/usr/bin/ld: cannot find -lOpenCL
collect2: ld returned 1 exit status

Any ideas how to fix it?

unsoindovo

legendary

Activity: 1932

Merit: 1042

https://locktrip.com/?refId=40964

Quote from: Prelude on September 11, 2014, 03:05:11 AM

You guys should stop dicking around with pool mining, I'm doing much better since I switched to solo mining yesterday. Let the pool operators get everything straight, until then enjoy solo mining.

are you saying you are able to find block in solo?

12TB plotted here and 0 in 30 hours!

i switch to pool..

unsoindovo

legendary

Activity: 1932

Merit: 1042

https://locktrip.com/?refId=40964

Quote from: Amph on September 11, 2014, 02:57:03 AM

the burst wallet uifix, didn't fixed the reverse transaction for me

still using 1.0.3 here...
all ok.
but i hope dev will fix latest wallet until the madatory update before block 11800!

bipben

member

Activity: 60

Merit: 10

Quote from: bitminer82 on September 10, 2014, 06:50:30 PM

Thanks Bipben for the GPU generator and your hard work! I've gone ahead and doubled your burst wallet balance for you.

Wow! Thanks a lot for your support

I will continue to enhance the plot generator. The next version will be centered on performance.
Some people pointed out that it would be great to be able to split the work between many graphic cards. I will add this feature to the roadmap.

mark.ti

newbie

Activity: 28

Merit: 0

Anyone tried to compile gpuPlotGenerator under Pimp Linux?

Razerglass

legendary

Activity: 1036

Merit: 1000

https://bmy.guide

Quote from: Amph on September 11, 2014, 03:08:26 AM

what a good setting for a 750ti?

the gpu plotter keeps crashing...even with 8 512

try 20 76

Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 870. (Read 2171078 times)