[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 902.

deevilknight

jr. member

Activity: 37

Merit: 10

Quote from: 1andrew on September 09, 2014, 04:00:51 PM

I only have 3 TB of storage, so I was looking to join a pool.

I was following the instructions at http://burst-pool.cryptoport.io/howto.html and received the following error:
{"errorCode":1,"errorDescription":"Incorrect request"}

After reading through the comments I discovered that I need 1 burst coin before I can participate. Will someone please donate a coin to BURST-TV4P-7VAV-AUGA-293HV? Much thanks!

Send you 2 burst just in case you need one more Wink

Razerglass

legendary

Activity: 1036

Merit: 1000

https://bmy.guide

Quote from: HoldTheLine on September 09, 2014, 04:05:21 PM

Can somebody tell me why I'm recieving around half the coins that I should be taking a high average of 3500TB network over 24 hours on the devs v2 pool?

Everyday its a good 2000 coins short. Been measuring the expected vs the actual payout for each 24 hour period.

Pretty poor, especially with the frequent drops into sub 2500TB territory.

Also - both miners now throw an occassional error of 'Error getting mining info from wallet' - literally nothing has changed in 5 days of otherwise correct mining.

you me and everybody else

coin1974

newbie

Activity: 46

Merit: 0

Quote from: bitminer82 on September 09, 2014, 04:08:48 PM

Quote from: coin1974 on September 09, 2014, 04:06:02 PM

When is guide coming for gpu plotting? Its hard to wait Grin

When i run miner cmd window flash and dissapears..? What i need to start actually and where (inside which folder) i have to run gpu miner? Please guys give some guides if you are testing plot with gpu. Thanks.

You need to put another line in the bat file that's just "pause". That will keep the command window open so you can see what errors there are.

Can you post or pm me the .bat command line then i will figure out parameters.. I have no idea what goes in .bat file at first place.

bitminer82

newbie

Activity: 56

Merit: 0

Quote from: coin1974 on September 09, 2014, 04:06:02 PM

When is guide coming for gpu plotting? Its hard to wait Grin

When i run miner cmd window flash and dissapears..? What i need to start actually and where (inside which folder) i have to run gpu miner? Please guys give some guides if you are testing plot with gpu. Thanks.

You need to put another line in the bat file that's just "pause". That will keep the command window open so you can see what errors there are.

coin1974

newbie

Activity: 46

Merit: 0

When is guide coming for gpu plotting? Its hard to wait Grin

When i run miner cmd window flash and dissapears..? What i need to start actually and where (inside which folder) i have to run gpu miner? Please guys give some guides if you are testing plot with gpu. Thanks.

HoldTheLine

member

Activity: 112

Merit: 10

Can somebody tell me why I'm recieving around half the coins that I should be taking a high average of 3500TB network over 24 hours on the devs v2 pool?

Everyday its a good 2000 coins short. Been measuring the expected vs the actual payout for each 24 hour period.

Pretty poor, especially with the frequent drops into sub 2500TB territory.

Also - both miners now throw an occassional error of 'Error getting mining info from wallet' - literally nothing has changed in 5 days of otherwise correct mining.

Chris001

sr. member

Activity: 448

Merit: 250

electroneum.com

I'm impressed that everything is going so well overall. It's working. Nice coin. I have put some BTC on this one. I would expect it to start going up as the markets get used to the multipools. That and people just noticing this coin. It has a lot going for it. I expect to see at least 2x soon.

Patek

member

Activity: 64

Merit: 10

Quote from: Razerglass on September 09, 2014, 03:59:15 PM

delete the last / after the port #

Thanks!

ow its telling me "No valid shares to submit to pool". Whats that about? How to fix it?

bitminer82

newbie

Activity: 56

Merit: 0

Quote from: MOB on September 09, 2014, 03:40:01 PM

Quote from: bitminer82 on September 09, 2014, 02:27:45 PM

Quote from: aprot on September 09, 2014, 02:16:21 PM

Quote from: bitminer82 on September 09, 2014, 10:47:56 AM

Anyone know why I'd be getting a "[WARN] No GPU Device found" error when trying to use the GPU miner? My r9 280X is definitely there... AMD APP SDK v2.9 and Catalyst 14.4

https://i.imgur.com/yeJqHzM.png

I have the same. Do you have GPU on the motherboard?

I upgraded from Windows 8 x64 to Windows 8.1 x64 and the problem disappeared.

What GPU do you have and at what speed is it plotting?

XFX R9 280x and approx 10,240 nonces per minute.

Avaahnaa

member

Activity: 67

Merit: 10

Quote from: Avaahnaa on September 09, 2014, 03:30:06 PM

Quote from: SpeedDemon13 on September 09, 2014, 03:18:42 PM

Quote from: Avaahnaa on September 09, 2014, 02:35:51 PM

Quote from: SpeedDemon13 on September 09, 2014, 02:15:09 PM

Maybe the 280x and 290x memory system works/handles better with the plotter compared to hd7970/7990, that why it kind of work on those cards.

Maybe it's not just the card. I am running the same card (R9 290) and similar specs to the 1 or 2 reported working gpu plotters. However I can not get mine to start plotting as the .exe crashes.

I've tried various definitions for the batch file and various driver versions with and without SDK.

There is something else I am missing and until I find it I will sit here and stare at my screen :/

Ava.

Did you try 13.x drivers and install APP SDK?

Yes sir I did, it's on my list.
I've seen that combo mentioned more than a couple of times. I'll give it another go on the off chance that I wrote it down without actually running it :s

Just when I start my plotter up again -.-

Ava

This is 13.9 + APP SDK

Previously using 14.6 I got exactly the same as this user

Quote from: hydraulic on September 09, 2014, 10:51:21 AM

What is going on? Cant get it to run.

1andrew

newbie

Activity: 4

Merit: 0

I only have 3 TB of storage, so I was looking to join a pool.

I was following the instructions at http://burst-pool.cryptoport.io/howto.html and received the following error:
{"errorCode":1,"errorDescription":"Incorrect request"}

After reading through the comments I discovered that I need 1 burst coin before I can participate. Will someone please donate a coin to BURST-TV4P-7VAV-AUGA-293HV? Much thanks!

Razerglass

legendary

Activity: 1036

Merit: 1000

https://bmy.guide

Quote from: Patek on September 09, 2014, 03:46:12 PM

Is this what Im supposed to get from pool miner when mining with http://178.62.39.204:8121/ pool?

Code:

H:\pocminer_pool_v1>java -cp pocminer_pool.jar;lib/*;lib/akka/*;lib/jetty/* pocm
iner_pool.POCMiner mine http://127.0.0.1:8125 http://178.62.39.204:8121/
[default-akka.actor.default-dispatcher-2] INFO org.eclipse.jetty.util.log - Logg
ing initialized @3444ms
[WARN] [09/09/2014 22:41:55.559] [default-akka.actor.default-dispatcher-5] [akka
://default/user/$a/$b] null
[WARN] [09/09/2014 22:42:05.307] [default-akka.actor.default-dispatcher-2] [akka
://default/user/$a/$b] null
[WARN] [09/09/2014 22:42:15.297] [default-akka.actor.default-dispatcher-5] [akka
://default/user/$a/$b] null
[WARN] [09/09/2014 22:42:25.308] [default-akka.actor.default-dispatcher-2] [akka
://default/user/$a/$b] null
[WARN] [09/09/2014 22:42:35.307] [default-akka.actor.default-dispatcher-4] [akka
://default/user/$a/$b] null

delete the last / after the port #

Razerglass

legendary

Activity: 1036

Merit: 1000

https://bmy.guide

how difficulty is solo mining, is there any one here that isnt in a pool? how many TB/Blocks/Days?

Patek

member

Activity: 64

Merit: 10

Is this what Im supposed to get from pool miner when mining with http://178.62.39.204:8121/ pool?

Code:

H:\pocminer_pool_v1>java -cp pocminer_pool.jar;lib/*;lib/akka/*;lib/jetty/* pocm
iner_pool.POCMiner mine http://127.0.0.1:8125 http://178.62.39.204:8121/
[default-akka.actor.default-dispatcher-2] INFO org.eclipse.jetty.util.log - Logg
ing initialized @3444ms
[WARN] [09/09/2014 22:41:55.559] [default-akka.actor.default-dispatcher-5] [akka
://default/user/$a/$b] null
[WARN] [09/09/2014 22:42:05.307] [default-akka.actor.default-dispatcher-2] [akka
://default/user/$a/$b] null
[WARN] [09/09/2014 22:42:15.297] [default-akka.actor.default-dispatcher-5] [akka
://default/user/$a/$b] null
[WARN] [09/09/2014 22:42:25.308] [default-akka.actor.default-dispatcher-2] [akka
://default/user/$a/$b] null
[WARN] [09/09/2014 22:42:35.307] [default-akka.actor.default-dispatcher-4] [akka
://default/user/$a/$b] null

Avaahnaa

member

Activity: 67

Merit: 10

Quote from: doge94 on September 09, 2014, 03:37:36 PM

I killed and restarted the plotter (with non overlapping nonces), now there are two files in the /plots dir. Will the miner still mine from both plots? Does the miner need to be restarted?

Miner scans the entire folder for each instance. So no it's fine. I currently have 5 plot files due to unforeseen restarting, namely trying to work the gpu plotter.

MOB

hero member

Activity: 493

Merit: 504

Quote from: bitminer82 on September 09, 2014, 02:27:45 PM

Quote from: aprot on September 09, 2014, 02:16:21 PM

Quote from: bitminer82 on September 09, 2014, 10:47:56 AM

Anyone know why I'd be getting a "[WARN] No GPU Device found" error when trying to use the GPU miner? My r9 280X is definitely there... AMD APP SDK v2.9 and Catalyst 14.4

I have the same. Do you have GPU on the motherboard?

I upgraded from Windows 8 x64 to Windows 8.1 x64 and the problem disappeared.

What GPU do you have and at what speed is it plotting?

daWallet

sr. member

Activity: 302

Merit: 250

Quote from: familiaverde on September 09, 2014, 03:36:50 PM

Quote from: regtable69 on September 09, 2014, 03:32:30 PM

Quote from: familiaverde on September 09, 2014, 03:28:51 PM

after i compiled gpuPlotGenerator on ubuntu 14.04 i got this error when i try to plot

bash: ./gpuPlotGenerator.exe: Permission denied

any clue ?

you need to chown it I had thatcwith a qt wallet. can't remember how to do it sorry

Thanks for the info ... anyone know how to "chown" it ?

i did try chmod +x

My solution was to format the drive with ext4 in ubuntu, then chmod it and so on...

doge94

sr. member

Activity: 349

Merit: 250

I killed and restarted the plotter (with non overlapping nonces), now there are two files in the /plots dir. Will the miner still mine from both plots? Does the miner need to be restarted?

familiaverde

sr. member

Activity: 560

Merit: 250

Quote from: regtable69 on September 09, 2014, 03:32:30 PM

Quote from: familiaverde on September 09, 2014, 03:28:51 PM

after i compiled gpuPlotGenerator on ubuntu 14.04 i got this error when i try to plot

bash: ./gpuPlotGenerator.exe: Permission denied

any clue ?

you need to chown it I had thatcwith a qt wallet. can't remember how to do it sorry

Thanks for the info ... anyone know how to "chown" it ?

i did try chmod +x

hydraulic

newbie

Activity: 22

Merit: 0

Quote from: Patek on September 09, 2014, 03:12:46 PM

I want to try out mining pool. To do so I need 1 Burst. Is there some kind soul who would help me out with 1 Burst?

I will pay you back as soon as I can

and yes, I tried faucet but hit enter before entering wallet address and now Im getting "Its too early" error.

BURST-XPY7-7V95-BDA5-FMY8R

Sent 5, just in case Wink

Topic: [ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000 - page 902. (Read 2171056 times)