Pages:
Author

Topic: [ANN][BWK] BULWARK | NO ICO | Masternodes | Accelerated PoW | Seesaw PoS/MN - page 43. (Read 125735 times)

newbie
Activity: 13
Merit: 0
jr. member
Activity: 43
Merit: 9
would like to add that if anyone is receiving MN rewards of 8.75 it doesnt mean that you are on the wrong chain or anything, its from private pools trying to deny MN payments, try to find the wallet of the miner reward from the TX id and post that wallet address in here or in discord.

will be happy when all these attacks end and the coin can move on Sad

Would you please explain that reasoning? How does them paying us deny MN rewards? Isn't MN reward separate from mining reward?

edit: In any case, those payments have disappeared after a full resync with the new wallet

I think that MN rewards come from POW after a block is found, its in the code that a % of the miner's reward will go to certain MN addresses....if a private pool gets enough hashrate they can essentially use their own code and deny that % to go to MN addresses or make it to where the reward will go to one of their masternodes.

This is how I understand it, please someone correct me if im wrong, always open to learn more.


Masternode steal miner rewards and makes it so the rich get richer

Not quite the goal of Masternodes, the goal of Masternodes is to give an incentive for properly running a full node in addition to providing computing power to validate transactions and mix coins.

It isn't "stealing" as Masternodes are earning the rewards we deserve, and the rewards you agree to to by mining Bulwark.

So, I upgraded bulwark to 1.2.3. I accepted that I lost a day of mining, whatever. Deleted everything except wallet.dat. Restarted. Nothing. Wallet sits at 0.17 BWK. Kept mining on poolr after they updated to 1.2.3. Poolr wallet page shows like 10 transactions. None received. Figured it may be a good idea to move to MasterHash. Now that also shows 2 new transactions. None received.

Okay, let's rebuild index, as you suggested. Nothing. Okay, let's add the nodes to bulwark.conf. Nothing. Might as well try "upgrade wallet format". Nope. "Rescan blockchain files". Nada. Just for good measure, tried index rebuild again, but NOTHING ARRIVES AT ALL. I'm still at 0.17 BWK even though I should've received more than 1 from Poolr and the same amount from MH. What the heck should I do to obtain a usable wallet, srsly? It's getting ridiculous. And why does it take like 5 minutes to start and sync the wallet on an i7 and 1 Gbps internet sub.

Official explorer says all is good, the transactions are there. Cool, except I don't have those coins.

SO after like 9 million attempts and randomly picking backup wallets now I have 2.6 BWK. Yay? ...

So to understand, the explorer is showing your wallet has more BWK than your wallet shows?

earned 400 coins,in wallet never came, BWK skam project, the developers are scammers, I have all

Ourselves, and all our mining pools were telling you not to mine and were also telling you that if you do mine it's a risk as any number of BWK you do find could be orphaned. This has clearly happened in your case.

Thankfully, we now have the solution in place.

I'm not sure how this is a "scam" as we don't profit from your loss of mining time in any way.
newbie
Activity: 9
Merit: 0
earned 400 coins,in wallet never came, BWK skam project, the developers are scammers, I have all
newbie
Activity: 9
Merit: 0
So, I upgraded bulwark to 1.2.3. I accepted that I lost a day of mining, whatever. Deleted everything except wallet.dat. Restarted. Nothing. Wallet sits at 0.17 BWK. Kept mining on poolr after they updated to 1.2.3. Poolr wallet page shows like 10 transactions. None received. Figured it may be a good idea to move to MasterHash. Now that also shows 2 new transactions. None received.

Okay, let's rebuild index, as you suggested. Nothing. Okay, let's add the nodes to bulwark.conf. Nothing. Might as well try "upgrade wallet format". Nope. "Rescan blockchain files". Nada. Just for good measure, tried index rebuild again, but NOTHING ARRIVES AT ALL. I'm still at 0.17 BWK even though I should've received more than 1 from Poolr and the same amount from MH. What the heck should I do to obtain a usable wallet, srsly? It's getting ridiculous. And why does it take like 5 minutes to start and sync the wallet on an i7 and 1 Gbps internet sub.

Official explorer says all is good, the transactions are there. Cool, except I don't have those coins.

SO after like 9 million attempts and randomly picking backup wallets now I have 2.6 BWK. Yay? ...


me, too, nothing not comes
newbie
Activity: 56
Merit: 0
So, I upgraded bulwark to 1.2.3. I accepted that I lost a day of mining, whatever. Deleted everything except wallet.dat. Restarted. Nothing. Wallet sits at 0.17 BWK. Kept mining on poolr after they updated to 1.2.3. Poolr wallet page shows like 10 transactions. None received. Figured it may be a good idea to move to MasterHash. Now that also shows 2 new transactions. None received.

Okay, let's rebuild index, as you suggested. Nothing. Okay, let's add the nodes to bulwark.conf. Nothing. Might as well try "upgrade wallet format". Nope. "Rescan blockchain files". Nada. Just for good measure, tried index rebuild again, but NOTHING ARRIVES AT ALL. I'm still at 0.17 BWK even though I should've received more than 1 from Poolr and the same amount from MH. What the heck should I do to obtain a usable wallet, srsly? It's getting ridiculous. And why does it take like 5 minutes to start and sync the wallet on an i7 and 1 Gbps internet sub.

Official explorer says all is good, the transactions are there. Cool, except I don't have those coins.

SO after like 9 million attempts and randomly picking backup wallets now I have 2.6 BWK. Yay? ...
newbie
Activity: 56
Merit: 0
So, I upgraded bulwark to 1.2.3. I accepted that I lost a day of mining, whatever. Deleted everything except wallet.dat. Restarted. Nothing. Wallet sits at 0.17 BWK. Kept mining on poolr after they updated to 1.2.3. Poolr wallet page shows like 10 transactions. None received. Figured it may be a good idea to move to MasterHash. Now that also shows 2 new transactions. None received.

Okay, let's rebuild index, as you suggested. Nothing. Okay, let's add the nodes to bulwark.conf. Nothing. Might as well try "upgrade wallet format". Nope. "Rescan blockchain files". Nada. Just for good measure, tried index rebuild again, but NOTHING ARRIVES AT ALL. I'm still at 0.17 BWK even though I should've received more than 1 from Poolr and the same amount from MH. What the heck should I do to obtain a usable wallet, srsly? It's getting ridiculous. And why does it take like 5 minutes to start and sync the wallet on an i7 and 1 Gbps internet sub.

Official explorer says all is good, the transactions are there. Cool, except I don't have those coins.
member
Activity: 308
Merit: 12
would like to add that if anyone is receiving MN rewards of 8.75 it doesnt mean that you are on the wrong chain or anything, its from private pools trying to deny MN payments, try to find the wallet of the miner reward from the TX id and post that wallet address in here or in discord.

will be happy when all these attacks end and the coin can move on Sad

Would you please explain that reasoning? How does them paying us deny MN rewards? Isn't MN reward separate from mining reward?

edit: In any case, those payments have disappeared after a full resync with the new wallet

I think that MN rewards come from POW after a block is found, its in the code that a % of the miner's reward will go to certain MN addresses....if a private pool gets enough hashrate they can essentially use their own code and deny that % to go to MN addresses or make it to where the reward will go to one of their masternodes.

This is how I understand it, please someone correct me if im wrong, always open to learn more.


Masternode steal miner rewards and makes it so the rich get richer
sr. member
Activity: 896
Merit: 290
would like to add that if anyone is receiving MN rewards of 8.75 it doesnt mean that you are on the wrong chain or anything, its from private pools trying to deny MN payments, try to find the wallet of the miner reward from the TX id and post that wallet address in here or in discord.

will be happy when all these attacks end and the coin can move on Sad

Would you please explain that reasoning? How does them paying us deny MN rewards? Isn't MN reward separate from mining reward?

edit: In any case, those payments have disappeared after a full resync with the new wallet

I think that MN rewards come from POW after a block is found, its in the code that a % of the miner's reward will go to certain MN addresses....if a private pool gets enough hashrate they can essentially use their own code and deny that % to go to MN addresses or make it to where the reward will go to one of their masternodes.

This is how I understand it, please someone correct me if im wrong, always open to learn more.
legendary
Activity: 2165
Merit: 1002
would like to add that if anyone is receiving MN rewards of 8.75 it doesnt mean that you are on the wrong chain or anything, its from private pools trying to deny MN payments, try to find the wallet of the miner reward from the TX id and post that wallet address in here or in discord.

will be happy when all these attacks end and the coin can move on Sad

Would you please explain that reasoning? How does them paying us deny MN rewards? Isn't MN reward separate from mining reward?

edit: In any case, those payments have disappeared after a full resync with the new wallet
newbie
Activity: 7
Merit: 0
Tried the new wallet, got stuck at block 95599 so i closed the wallet and deleted everything in the App_Data folder except the wallet.dat file. Re-open, re-sync wallet and it started from scratch BUT it got stuck again at 95599.

So... any ideas?


It got sorted! The first win64 i downloaded contained win32 files. Downloaded it again and it was a completely different size but the exact same name. Wiped everything and started over. It's now working.
jr. member
Activity: 65
Merit: 4
Hey everyone!

Please spread your hash power for the health of the blockchain


Masterhash Pool 1

Come join the fun and get your mine on over at https://pool.masterhash.us

Happy Hour Every Weekend 0% FEES for 48hrs

Stratum  : stratum+tcp://pool.masterhash.us:10010
User     : YOUR_BWK_ADDRESS
Password : c=BWK
Difficulty: d=

Website  : https://pool.masterhash.us
Payout   : Every 2 hours
Fee      : 0% BWK

Example command line :

STD Port :-a nist5 -o stratum+tcp://pool.masterhash.us:10010 -u bV5JGADoPaKEATNLPCXU2xuiJmWYEK9ULG -p c=BWK
Nicehash :-a nist5 -o stratum+tcp://pool.masterhash.us:20010 -u bV5JGADoPaKEATNLPCXU2xuiJmWYEK9ULG -p c=BWK

Masterhash Pool 2

Come join the fun and get your mine on over at https://yiimp.masterhash.us

Happy Hour Every Weekend 0% FEES for 48hrs

Stratum  : stratum+tcp://yiimp.masterhash.us:3833
User     : YOUR_BWK_ADDRESS
Password : c=BWK
Difficulty: d=

Website  : https://yiimp.masterhash.us
Payout   : Every 2 hours
Fee      : 0% BWK

Example command line :

-a nist5 -o stratum+tcp://yiimp.masterhash.us:3833 -u bHNK2KUyHZBUiMySG5D3XC2ehRgecQrs53 -p c=BWK

Please spread your hash power for the health of the blockchain
newbie
Activity: 8
Merit: 0
All my BSOD coins arrived, but ZERO for poolr and POD32 - :-(
newbie
Activity: 7
Merit: 0
Tried the new wallet, got stuck at block 95599 so i closed the wallet and deleted everything in the App_Data folder except the wallet.dat file. Re-open, re-sync wallet and it started from scratch BUT it got stuck again at 95599.

So... any ideas?
newbie
Activity: 266
Merit: 0
Where to read more about it?
full member
Activity: 322
Merit: 101
Recently Jay of Nanex exchange was talking about Bulwark as an interesting project.

Keeping a close eye on this, it would be awesome if its added for trading on nanex
newbie
Activity: 162
Merit: 0
Hello,

just wanted to report that I made the update to 1.2.3 following the instructions and everything is fine, all coins mined are there.
Just a suggestion to keep the backup directory.

full member
Activity: 406
Merit: 170
UPDATE

Important!

03/20/2018

Mandatory Wallet Update (Version 1.2.3)

Please update all of your local wallets and masternodes to the latest version 1.2.3 as soon as possible. You will need likely need to remove everything except for wallet.dat and masternode.conf(if applicable) from your Bulwark Data directory before launching 1.2.3 to initiate a full new sync.

https://github.com/bulwark-crypto/Bulwark/releases

https://github.com/bulwark-crypto/Bulwark-MN-Install

Additionally, please insert the following addnodes in your bulwark.conf:

addnode=bwk1.masterhash.us:52543
addnode=bwk2.masterhash.us:52543
addnode=bwk3.masterhash.us:52543
addnode=bwk4.masterhash.us:52543
addnode=bwk5.masterhash.us:52543
addnode=bwk6.masterhash.us:52543
addnode=bwk7.masterhash.us:52543
addnode=bwk8.masterhash.us:52543
addnode=bwk9.masterhash.us:52543
addnode=bwk10.masterhash.us:52543
newbie
Activity: 56
Merit: 0
There were several negative cases with other coins
Excellent work of developers to solve the problem with cryptography so smoothly and quickly.

Smoothly is a stretch tho, Poolr says it paid me 97 BWK, but in reality it's about 0.3 Cheesy
member
Activity: 294
Merit: 17
There were several negative cases with other coins
Excellent work of developers to solve the problem with cryptography so smoothly and quickly.
jr. member
Activity: 81
Merit: 1
Can someone help please, having trouble compiling on Mac High Sierra. My problem is detailed in Kegawi's guide here: https://gist.github.com/kewagi/7fe12f893ef80fb8a8a0ab28f4a155cc

He vorpal, I replied to you on the Github Gist page.
Thanks for the guide!  Yeah I was just getting warnings, no real errors.  Wallet works nicely.  Thanks again!
Pages:
Jump to: