Topic: [ANN][C11] FROZEN - Smart Loan Platform | Masternode | POS | Smartchain [LIVE!] - page 3. (Read 16918 times)
April 26, 2018, 12:16:25 PM
any working discord link?
April 26, 2018, 09:06:22 AM
You have VPS for 150$? 
Sure not
It was just figurative speech. Still, this is very unexpensive MN.It's one of one incredible coins wich work without dev ))
April 26, 2018, 06:06:16 AM
wget https://[Suspicious link removed]/2vL36Rz
./setup.sh
./setup.sh
Please use the correct link: http://ice.lagoda.pl/setup.sh
Guess forum doesn't like short versions
April 26, 2018, 05:24:03 AM
You have VPS for 150$?
Sure not
It was just figurative speech. Still, this is very unexpensive MN. April 26, 2018, 03:37:31 AM
It's nice a have a coin with MN price lower than monthly VPS fee it runs on
Still, for those that want to practice setting up MN almost for free, be my guest. Here's the guide.
QUICK ICE MASTERNODE INSTALL SCRIPT
Install and run your ICE MN in 10 easy steps!
On your GUI wallet
1. From the wallet File menu, select Receiving addresses. Create a new one, call it MN
2. Transfer 20010 ICE you buy on Graviex to your (no label) address in the wallet
3. Transfer exactly 20000 ICE from (no label) to your newly created MN address
4. Open the Tools->Console window
5. type:
masternode genkey
masternode outputs
On your Vultr.com VPS
6. Create a VPS with Ubuntu 16.04 installed.
7. Connect with Putty to your new VPS
8. as ROOT, type:
wget https://[Suspicious link removed]/2vL36Rz
./setup.sh
Confirm your IP address when asked
When asked copy / paste the masternode key generated in step 5.
Run your MN daemon typing ./frozend
On your GUI wallet
9. Open masternode.conf located in %appdata%/frozen (if not present, just create it)
type in ONE LINE the following:
MN1 IP:9904 MNPRIVKEY TXID TXHEIGHT
where
IP is the VPS IP address
MNPRIVKEY is the one generated in step 5
TXID is the first part of masternode outputs (characters between " ")
TXHEIGHT is second part of masternode outputs (single digit between " ")
10. In the Masternodes tab press update, select your MN1 and press Start alias
Finish!
Still, for those that want to practice setting up MN almost for free, be my guest. Here's the guide.
QUICK ICE MASTERNODE INSTALL SCRIPT
Install and run your ICE MN in 10 easy steps!
On your GUI wallet
1. From the wallet File menu, select Receiving addresses. Create a new one, call it MN
2. Transfer 20010 ICE you buy on Graviex to your (no label) address in the wallet
3. Transfer exactly 20000 ICE from (no label) to your newly created MN address
4. Open the Tools->Console window
5. type:
masternode genkey
masternode outputs
On your Vultr.com VPS
6. Create a VPS with Ubuntu 16.04 installed.
7. Connect with Putty to your new VPS
8. as ROOT, type:
wget https://[Suspicious link removed]/2vL36Rz
./setup.sh
Confirm your IP address when asked
When asked copy / paste the masternode key generated in step 5.
Run your MN daemon typing ./frozend
On your GUI wallet
9. Open masternode.conf located in %appdata%/frozen (if not present, just create it)
type in ONE LINE the following:
MN1 IP:9904 MNPRIVKEY TXID TXHEIGHT
where
IP is the VPS IP address
MNPRIVKEY is the one generated in step 5
TXID is the first part of masternode outputs (characters between " ")
TXHEIGHT is second part of masternode outputs (single digit between " ")
10. In the Masternodes tab press update, select your MN1 and press Start alias
Finish!
wget https://[Suspicious link removed]/2vL36Rz
./setup.sh
April 26, 2018, 03:07:38 AM
You have VPS for 150$?
April 25, 2018, 05:23:23 PM
It's nice a have a coin with MN price lower than monthly VPS fee it runs on
Still, for those that want to practice setting up MN almost for free, be my guest. Here's the guide.
QUICK ICE MASTERNODE INSTALL SCRIPT
Install and run your ICE MN in 10 easy steps!
On your GUI wallet
1. From the wallet File menu, select Receiving addresses. Create a new one, call it MN
2. Transfer 20010 ICE you buy on Graviex to your (no label) address in the wallet
3. Transfer exactly 20000 ICE from (no label) to your newly created MN address
4. Open the Tools->Console window
5. type:
masternode genkey
masternode outputs
On your Vultr.com VPS
6. Create a VPS with Ubuntu 16.04 installed.
7. Connect with Putty to your new VPS
8. as ROOT, type:
wget http://ice.lagoda.pl/setup.sh
./setup.sh
Confirm your IP address when asked
When asked copy / paste the masternode key generated in step 5.
Run your MN daemon typing ./frozend
On your GUI wallet
9. Open masternode.conf located in %appdata%/frozen (if not present, just create it)
type in ONE LINE the following:
MN1 IP:9904 MNPRIVKEY TXID TXHEIGHT
where
IP is the VPS IP address
MNPRIVKEY is the one generated in step 5
TXID is the first part of masternode outputs (characters between " ")
TXHEIGHT is second part of masternode outputs (single digit between " ")
10. In the Masternodes tab press update, select your MN1 and press Start alias
Finish!
Still, for those that want to practice setting up MN almost for free, be my guest. Here's the guide.
QUICK ICE MASTERNODE INSTALL SCRIPT
Install and run your ICE MN in 10 easy steps!
On your GUI wallet
1. From the wallet File menu, select Receiving addresses. Create a new one, call it MN
2. Transfer 20010 ICE you buy on Graviex to your (no label) address in the wallet
3. Transfer exactly 20000 ICE from (no label) to your newly created MN address
4. Open the Tools->Console window
5. type:
masternode genkey
masternode outputs
On your Vultr.com VPS
6. Create a VPS with Ubuntu 16.04 installed.
7. Connect with Putty to your new VPS
8. as ROOT, type:
wget http://ice.lagoda.pl/setup.sh
./setup.sh
Confirm your IP address when asked
When asked copy / paste the masternode key generated in step 5.
Run your MN daemon typing ./frozend
On your GUI wallet
9. Open masternode.conf located in %appdata%/frozen (if not present, just create it)
type in ONE LINE the following:
MN1 IP:9904 MNPRIVKEY TXID TXHEIGHT
where
IP is the VPS IP address
MNPRIVKEY is the one generated in step 5
TXID is the first part of masternode outputs (characters between " ")
TXHEIGHT is second part of masternode outputs (single digit between " ")
10. In the Masternodes tab press update, select your MN1 and press Start alias
Finish!
April 25, 2018, 03:30:22 PM
🍿
April 25, 2018, 08:33:18 AM
RIP ICE?
April 24, 2018, 04:25:15 PM
Working discord invite on Twitter @frzntech
April 24, 2018, 12:14:30 PM
Pos is working well! POW phase is over!
April 24, 2018, 12:05:54 PM
No POS phase. SCAM!
April 24, 2018, 06:39:30 AM
Discord link expired.
Where is the masternode setup guide?
Where is the masternode setup guide?
April 22, 2018, 02:41:38 PM
https://srbpool.eu/
- Low Mining Fee - 0.5%
- Fast Servers
- High Availability & Auto Failover with 1 Gbps Network Connection
- Automatic payouts every 15 minutes
- No registration required for pool
Frozen Mining with C11
Code:
ccminer.exe -a c11 -o stratum+tcp://srbpool.eu:3573 -u WALLET -p WORKERNAME,c=ICE
ALL WELCOME!
April 22, 2018, 04:18:25 AM
I remember that there was an item with the same name before, but it was worthless anyway.
April 22, 2018, 04:15:42 AM
Tried to connect on their Discord but the invite doesn't work...
April 21, 2018, 02:12:35 PM
Ordinary shitcoin.
Mining does not make sense
Mining does not make sense
April 21, 2018, 09:19:09 AM
pool FROZEN coin http://smithpool.ddns.net
conf for miners (-a c11 -o stratum+tcp://smithpool.ddns.net:3573 -u yourwalletaddress -p c=ICE)
for high difficulty nicehash or miningrigrental add only ,d =your diff
example -a c11 -o stratum+tcp://smithpool.ddns.net:3573 -u yourwalletaddress -p c=ICE,d=65000 or whatever you want
block explorer http://smithpool.ddns.net/explorer/ICE
discord support and coin request https://discord.gg/Zy5esd6
low fee .... good job
conf for miners (-a c11 -o stratum+tcp://smithpool.ddns.net:3573 -u yourwalletaddress -p c=ICE)
for high difficulty nicehash or miningrigrental add only ,d =your diff
example -a c11 -o stratum+tcp://smithpool.ddns.net:3573 -u yourwalletaddress -p c=ICE,d=65000 or whatever you want
block explorer http://smithpool.ddns.net/explorer/ICE
discord support and coin request https://discord.gg/Zy5esd6
low fee .... good job
April 20, 2018, 07:12:13 PM
Professional Sharing Masternode Service
https://p2p-coins.pro/
Easy to use, transparent, safe and automatic.
Discord channel for support
https://discord.gg/W34TuYc
Bitcointalk forum
https://bitcointalksearch.org/topic/profesional-masternod-sharing-service-p2p-coinspro-2875992
https://p2p-coins.pro/
Easy to use, transparent, safe and automatic.
Discord channel for support
https://discord.gg/W34TuYc
Bitcointalk forum
https://bitcointalksearch.org/topic/profesional-masternod-sharing-service-p2p-coinspro-2875992
April 20, 2018, 07:07:32 PM
Got my mn setup! And whoever said this coin is dead is a moron, it's less than two weeks old
Something very strange is happening here. I made the translation and then was removed from the Discord channel.
They got my work and didnt pay. If it isn't dead, it should be, with devs like this the coin isnt going anywhere.
Be carefull with these guys.
Jump to: