Bitcoin Forum>Alternate cryptocurrencies>Altcoin Discussion
Pages:
Author

Topic: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency - page 3. (Read 7726 times)

Narken
member
Activity: 112
Merit: 10
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 06, 2013, 09:10:07 AM
#75
Quote from: Oldminer on May 06, 2013, 06:33:19 AM
Quote from: Narken on May 06, 2013, 06:26:04 AM
Short downtime while network hardware is being upgraded to better handle any potential DDOS attacks.

It shouldn't take long as everything is really to be switched over

Cheers, been loving this pool so far Smiley

Thanks, its back up

Network latency should also be more stable now
Oldminer
legendary
Activity: 1022
Merit: 1001
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 06, 2013, 06:33:19 AM
#74
Quote from: Narken on May 06, 2013, 06:26:04 AM
Short downtime while network hardware is being upgraded to better handle any potential DDOS attacks.

It shouldn't take long as everything is really to be switched over

Cheers, been loving this pool so far Smiley
Narken
member
Activity: 112
Merit: 10
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 06, 2013, 06:26:04 AM
#73
Short downtime while network hardware is being upgraded to better handle any potential DDOS attacks.

It shouldn't take long as everything is really to be switched over
Mapuo
hero member
Activity: 910
Merit: 1002
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 06, 2013, 05:47:12 AM
#72
Quote from: Narken on May 05, 2013, 04:39:02 PM
Quote from: Narken on May 05, 2013, 04:37:02 PM
Quote from: p00chie on May 05, 2013, 04:26:12 PM
Quote from: frobley on May 05, 2013, 03:19:17 PM
I seem to be throwing MH at this pool without my wallet address ever appearing on the payout list - if it does, it stays for 1 or 2 payouts and is then gone.

same for me here. sometimes it stays for a couple of blocks but afterwars gone. strange stuff.

but sometimes it reappears and you will get much more of your normal amount.

@narken could you please explain this behaviour?

I'm auctually currently looking at this.

Seems like after noding up with rest of p2pool shares is not always calculated correctly.

I might switch us back to solo mining on single node again to prevent this

Please pm me your cnc address so I can check it in block explorer and logs
Same here. CKPdRabk6au8UhU3UZHqKaMQaL6UMNoVZV

Thanks.

Did your receive for the last 5 blocks that was solved ?
No, just for four blocks 3.5 hours ago.
Still waiting...
Minas3d
newbie
Activity: 18
Merit: 0
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 06, 2013, 12:41:40 AM
#71
I'm getting like 90% stales from this node, at the same time there are other people getting ok shares, I have no idea what's going on.
anatolikostis
legendary
Activity: 2026
Merit: 1005
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 05, 2013, 07:31:32 PM
#70
actually acording to exchange rate - fast epic fail!  Grin
Izael
newbie
Activity: 27
Merit: 0
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 05, 2013, 07:00:20 PM
#69
One question, when i run cgminer and set "-s 5"... what meaning? I'm seeing SCRYPT-README and CGMINER Readme and i can't read nothing about this :S
LeftToeCut
full member
Activity: 154
Merit: 100
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 05, 2013, 06:31:38 PM
#68
Narken, yeah, same here. Would be interesting to see which pools are spared ....

Actually...I got 100/100 at home , wonder what my ISP is going to think if it will be hit by 8gbps Smiley almost worth trying hosting in the closet
Narken
member
Activity: 112
Merit: 10
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 05, 2013, 06:16:38 PM
#67
Quote from: Neverest on May 05, 2013, 05:40:46 PM
Intensity 18 makes it impossible to type this Smiley
And yes, down again, as is dontmine.me.

Any pools online at the moment?

DDOS knocked the entire network offline ;-(

Guess someone really don't like cnc p2pools, or some greedy cnc pool owner wanting people to switch to his/her pool
Well whatever, hope they have fun
Neverest
newbie
Activity: 70
Merit: 0
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 05, 2013, 05:40:46 PM
#66
Intensity 18 makes it impossible to type this Smiley
And yes, down again, as is dontmine.me.

Any pools online at the moment?
anatolikostis
legendary
Activity: 2026
Merit: 1005
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 05, 2013, 05:13:14 PM
#65
Quote from: Neverest on May 05, 2013, 08:25:25 AM
I can connect, no rejects and 5 accepted after about 10 minutes (no payouts yet).

I use cgminer --scrypt -o chncoin.no-ip.biz:9333 -u my-address -p x -s 5 --expiry 10 --gpu-threads 1 --intensity 14 --queue 0

I do get a lot of HW errors: 10 in first 10 minutes. Is this normal or am I missing some settings above? Using a Radeon 6950, currently 335kh/s
try to that

-s 5 --expiry 5 --intensity 18 --queue 0

it`s the most suitable for my 2600kh/s rig... Roll Eyes

by the way, bter.com seems to be is not a honest exchange: only after several letters to support my 63CNC has revealed at account during massive down of exchange rate.


holly crap! pool is down again!
Narken
member
Activity: 112
Merit: 10
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 05, 2013, 05:12:26 PM
#64
Quote from: p00chie on May 05, 2013, 04:52:49 PM
send

Thanks.

I have noticed other cnc p2pools have the same problem.

Seems to be a general problem with connected p2pools and cnc

Seems like sometimes payments from connected nodes is not accepted in the node network
p00chie
member
Activity: 115
Merit: 10
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 05, 2013, 04:52:49 PM
#63
send
Narken
member
Activity: 112
Merit: 10
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 05, 2013, 04:39:02 PM
#62
Quote from: Narken on May 05, 2013, 04:37:02 PM
Quote from: p00chie on May 05, 2013, 04:26:12 PM
Quote from: frobley on May 05, 2013, 03:19:17 PM
I seem to be throwing MH at this pool without my wallet address ever appearing on the payout list - if it does, it stays for 1 or 2 payouts and is then gone.

same for me here. sometimes it stays for a couple of blocks but afterwars gone. strange stuff.

but sometimes it reappears and you will get much more of your normal amount.

@narken could you please explain this behaviour?

I'm auctually currently looking at this.

Seems like after noding up with rest of p2pool shares is not always calculated correctly.

I might switch us back to solo mining on single node again to prevent this

Please pm me your cnc address so I can check it in block explorer and logs
Narken
member
Activity: 112
Merit: 10
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 05, 2013, 04:37:02 PM
#61
Quote from: p00chie on May 05, 2013, 04:26:12 PM
Quote from: frobley on May 05, 2013, 03:19:17 PM
I seem to be throwing MH at this pool without my wallet address ever appearing on the payout list - if it does, it stays for 1 or 2 payouts and is then gone.

same for me here. sometimes it stays for a couple of blocks but afterwars gone. strange stuff.

but sometimes it reappears and you will get much more of your normal amount.

@narken could you please explain this behaviour?

I'm auctually currently looking at this.

Seems like after noding up with rest of p2pool shares is not always calculated correctly.

I might switch us back to solo mining on single node again to prevent this
p00chie
member
Activity: 115
Merit: 10
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 05, 2013, 04:26:12 PM
#60
Quote from: frobley on May 05, 2013, 03:19:17 PM
I seem to be throwing MH at this pool without my wallet address ever appearing on the payout list - if it does, it stays for 1 or 2 payouts and is then gone.

same for me here. sometimes it stays for a couple of blocks but afterwars gone. strange stuff.

but sometimes it reappears and you will get much more of your normal amount.

@narken could you please explain this behaviour?
frobley
hero member
Activity: 708
Merit: 500
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 05, 2013, 03:19:17 PM
#59
I seem to be throwing MH at this pool without my wallet address ever appearing on the payout list - if it does, it stays for 1 or 2 payouts and is then gone.
paladin281978
hero member
Activity: 742
Merit: 500
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 05, 2013, 03:17:01 PM
#58
Narken

1355 kh
33% rejects (A:100; R:33)
how to reduce rejects?

cgminer.exe --scrypt -o http://chncoin.no-ip.biz:9333 -u CKN2UFX7zrtPUCuFFTBhQ86ZfDjmDDDXiP+0.0015774 -p 12345 -I 18 -s 5 --expiry 10 --gpu-threads 1 --queue 0 --shaders 1792 --thread-concurrency 16000

+0.0015774 - diff 103

UPD: 24-40% rejects


Narken
member
Activity: 112
Merit: 10
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 05, 2013, 12:01:41 PM
#57
And back up again finally

Another major attack. But don't surrender that easy :-)

Server also crashed, so used the time to rebuilt it with clean Ubuntu installation, additional memory and new p2pool

Mine away ;-)

.Note been stable for the next few hours and found some blocks..


 
Neverest
newbie
Activity: 70
Merit: 0
Re: [ANN][CNC]P2Pool for CHNcoin on 100mbit line with low latency
May 05, 2013, 08:25:25 AM
#56
I can connect, no rejects and 5 accepted after about 10 minutes (no payouts yet).

I use cgminer --scrypt -o chncoin.no-ip.biz:9333 -u my-address -p x -s 5 --expiry 10 --gpu-threads 1 --intensity 14 --queue 0

I do get a lot of HW errors: 10 in first 10 minutes. Is this normal or am I missing some settings above? Using a Radeon 6950, currently 335kh/s
Pages:
Bitcoin Forum>Alternate cryptocurrencies>Altcoin Discussion
Jump to: