[ANN][DASH] Dash (dash.org) | First Self-Funding Self-Governing Crypto Currency - page 3802.

karlb187

full member

Activity: 210

Merit: 100

Need To Contact Me? Go To My Site!

ok so that makes 37 tickets left for sale in the 45DRK lotto. Let's get the rest of these tickets sold so we can pick the winners Grin

Just so you know, you can purchase multiple tickets to the same lotto to get a better chance at winning the prizes (and help us to pick the winners sooner)

Buy Your Tickets @ http://drklotto.com

Good luck everyone

tedtheodorelogan

newbie

Activity: 18

Merit: 0

Count me in for 1 DRK too.

Status: 0/unconfirmed, broadcast through 13 nodes
Date: 11/10/2014 16:46
To: DRK Lotto 1 DRK XkpXNRiDd5WQNSh3Hgizm5jDYYWY7j3k8d
Debit: -1.00 DRK
Net amount: -1.00 DRK
Transaction ID: b22ca65127c80c19de4258181c0e92c2ca7b203f9448d7dfcd669066ac1190a3

whisper

sr. member

Activity: 267

Merit: 250

Learn to go against your mind

Status: 0/unconfirmed, broadcast through 8 nodes
Date: 11.10.2014 г. 18:36
To: XkpXNRiDd5WQNSh3Hgizm5jDYYWY7j3k8d
Debit: -1.00 DRK
Net amount: -1.00 DRK
Transaction ID: e0c0d74d7611986fc260d2bdc613dd2c15a00d7e4598dfbb4ab8843c9538a16a

karlb187

full member

Activity: 210

Merit: 100

Need To Contact Me? Go To My Site!

Quote from: etoque on October 11, 2014, 07:19:04 AM

Cool,Im in for loto ! send 1drk

État: 2/non confirmée, diffusée à travers 4 nœuds
Date: 2014-10-11 08:18
À: loto#1 XkpXNRiDd5WQNSh3Hgizm5jDYYWY7j3k8d
Débit: -1.00 DRK
Frais de transaction: -0.001 DRK
Montant net: -1.001 DRK

ok good luck.

We now have 39 tickets left for the 45DRK lotto (1DRK per ticket)

Buy Your Tickets @ http://drklotto.com

Ignition75

sr. member

Activity: 462

Merit: 250

www.dashpay.io

Quote from: ?? on ??

Quote from: Ignition75 on October 11, 2014, 08:17:36 AM

Quote from: reflexmk on October 11, 2014, 08:05:39 AM

Can you post a link of a good BAMT version, 20w is a lot Grin

edit: undervolting isn't going to be a problem in BAMT I hope

No mate, some of the best power to hash figures I've ever seen have been using BAMT...

I remember on linux you cannot modify gpu vcore settings (on ATI gpu), have to write to firmware each time. So for finding the best settings or even for mining different algos bamt sux I figured. I shutdown my gpus two month ago, was already mining at a loss for quite some time then Sad

Oops I didn't know that.

I remember reading guides when I first got into mining and some of the best undervolting figures I'd seen were on BAMT.

That was a long time ago however and a lot may have changed since then. I'm having to underclock and undervolt on all my AMD rigs just to stay within a sniff of profit, my Nvidia rigs are doing OK but no API support so you have to manually check on them all the time...

illodin

hero member

Activity: 966

Merit: 1003

Quote from: etoque on October 11, 2014, 08:30:47 AM

Also,what up with DRK?

Evan say something more about instant transaction ?

thx

https://www.darkcoin.io/downloads/InstantTX.pdf
https://darkcointalk.org/threads/paper-transaction-locking-and-masternode-consensus.2418/

splawik21

legendary

Activity: 1372

Merit: 1005

DASH is the future of crypto payments!

Quote from: Freckleg on October 11, 2014, 08:54:59 AM

Ok left Mintpal now to Bitfinex, works great

+1

Coins can you make a poll for the excahnges where will we focus to get the nice volumes?

Freckleg

hero member

Activity: 508

Merit: 500

Ok left Mintpal now to Bitfinex, works great

etoque

legendary

Activity: 1988

Merit: 1000

Also,what up with DRK?

Evan say something more about instant transaction ?

thx

Ignition75

sr. member

Activity: 462

Merit: 250

www.dashpay.io

Quote from: reflexmk on October 11, 2014, 08:05:39 AM

Can you post a link of a good BAMT version, 20w is a lot Grin

edit: undervolting isn't going to be a problem in BAMT I hope

No mate, some of the best power to hash figures I've ever seen have been using BAMT...

reflexmk

sr. member

Activity: 289

Merit: 250

Quote from: thelonecrouton on October 11, 2014, 07:13:58 AM

Quote from: Ignition75 on October 11, 2014, 07:08:56 AM

Quote from: thelonecrouton on October 11, 2014, 06:53:26 AM

Quote from: Ignition75 on October 11, 2014, 06:29:00 AM

Quote from: thelonecrouton on October 11, 2014, 06:17:55 AM

Quote from: reflexmk on October 11, 2014, 05:53:25 AM

Quote from: Ignition75 on October 10, 2014, 10:13:53 PM

Damn I'm undervolting my rigs like a c*nt just to stay in the game...

I'm reduced now to playing around with Mobo voltages, to shave that extra 20 watts off per rig...

Grin

This is fun, I'm getting my nerd on...

Please do post settings/results and tips, power is expensive all around the world you know Grin

We need some way of attaching GPUs to a Raspberry Pi. 20 at a time.

Hells Yeah! Each rig is 170-ish watts before you look at GPU's... I've heard of some funky PCIe adaptors that allow you to run stacks of cards per rig, perhaps it's time to start looking them up...

170W? Have you got i7's and multiple terabyte HD's in there?

My cheapest-available-Celeron, Asus H61 and BAMT on a USB stick rigs all pull about 96W idle, and 460ish with 5 270's running.

edit: a brief perusal of the intertubes seems to indicate that you can't connect anything PCI/PCIe to a Pi, they only have a USB bus. You can however attach FPGA's... if such a mythical beast for X11 is ever proven to exist.

A mate who is getting DRK from this chap, http://ltcgear.com/product/dual-mod-m10/?apage=254, is convinced it's FPGA's, but hey, it could be a farm of GPU's.

AMD FX4130 + HDD, think I should under-clock it?

I'm too scared to go PiMP or BAMT...

Just ditch the HDD, both PIMP and BAMT are dirt simple, personally I prefer BAMT as it's even dirt-simpler than PIMP. 20W saved right there, more if you've got Win running off the drive with hundreds of vampire processes you can't turn off.

Can you post a link of a good BAMT version, 20w is a lot Grin

edit: undervolting isn't going to be a problem in BAMT I hope

Ignition75

sr. member

Activity: 462

Merit: 250

www.dashpay.io

Quote from: thelonecrouton on October 11, 2014, 07:13:58 AM

Just ditch the HDD, both PIMP and BAMT are dirt simple, personally I prefer BAMT as it's even dirt-simpler than PIMP. 20W saved right there, more if you've got Win running off the drive with hundreds of vampire processes you can't turn off.

Vampire services, lol...

OK I will try BAMT...

etoque

legendary

Activity: 1988

Merit: 1000

Cool,Im in for loto ! send 1drk

État: 2/non confirmée, diffusée à travers 4 nœuds
Date: 2014-10-11 08:18
À: loto#1 XkpXNRiDd5WQNSh3Hgizm5jDYYWY7j3k8d
Débit: -1.00 DRK
Frais de transaction: -0.001 DRK
Montant net: -1.001 DRK

thelonecrouton

legendary

Activity: 966

Merit: 1000

Quote from: Ignition75 on October 11, 2014, 07:08:56 AM

Quote from: thelonecrouton on October 11, 2014, 06:53:26 AM

Quote from: Ignition75 on October 11, 2014, 06:29:00 AM

Quote from: thelonecrouton on October 11, 2014, 06:17:55 AM

Quote from: reflexmk on October 11, 2014, 05:53:25 AM

Quote from: Ignition75 on October 10, 2014, 10:13:53 PM

Damn I'm undervolting my rigs like a c*nt just to stay in the game...

I'm reduced now to playing around with Mobo voltages, to shave that extra 20 watts off per rig...

Grin

This is fun, I'm getting my nerd on...

Please do post settings/results and tips, power is expensive all around the world you know Grin

We need some way of attaching GPUs to a Raspberry Pi. 20 at a time.

Hells Yeah! Each rig is 170-ish watts before you look at GPU's... I've heard of some funky PCIe adaptors that allow you to run stacks of cards per rig, perhaps it's time to start looking them up...

170W? Have you got i7's and multiple terabyte HD's in there?

My cheapest-available-Celeron, Asus H61 and BAMT on a USB stick rigs all pull about 96W idle, and 460ish with 5 270's running.

edit: a brief perusal of the intertubes seems to indicate that you can't connect anything PCI/PCIe to a Pi, they only have a USB bus. You can however attach FPGA's... if such a mythical beast for X11 is ever proven to exist.

A mate who is getting DRK from this chap, http://ltcgear.com/product/dual-mod-m10/?apage=254, is convinced it's FPGA's, but hey, it could be a farm of GPU's.

AMD FX4130 + HDD, think I should under-clock it?

I'm too scared to go PiMP or BAMT...

Just ditch the HDD, both PIMP and BAMT are dirt simple, personally I prefer BAMT as it's even dirt-simpler than PIMP. 20W saved right there, more if you've got Win running off the drive with hundreds of vampire processes you can't turn off.

Ignition75

sr. member

Activity: 462

Merit: 250

www.dashpay.io

Quote from: thelonecrouton on October 11, 2014, 06:53:26 AM

Quote from: Ignition75 on October 11, 2014, 06:29:00 AM

Quote from: thelonecrouton on October 11, 2014, 06:17:55 AM

Quote from: reflexmk on October 11, 2014, 05:53:25 AM

Quote from: Ignition75 on October 10, 2014, 10:13:53 PM

Damn I'm undervolting my rigs like a c*nt just to stay in the game...

I'm reduced now to playing around with Mobo voltages, to shave that extra 20 watts off per rig...

Grin

This is fun, I'm getting my nerd on...

Please do post settings/results and tips, power is expensive all around the world you know Grin

We need some way of attaching GPUs to a Raspberry Pi. 20 at a time.

Hells Yeah! Each rig is 170-ish watts before you look at GPU's... I've heard of some funky PCIe adaptors that allow you to run stacks of cards per rig, perhaps it's time to start looking them up...

170W? Have you got i7's and multiple terabyte HD's in there?

My cheapest-available-Celeron, Asus H61 and BAMT on a USB stick rigs all pull about 96W idle, and 460ish with 5 270's running.

edit: a brief perusal of the intertubes seems to indicate that you can't connect anything PCI/PCIe to a Pi, they only have a USB bus. You can however attach FPGA's... if such a mythical beast for X11 is ever proven to exist.

A mate who is getting DRK from this chap, http://ltcgear.com/product/dual-mod-m10/?apage=254, is convinced it's FPGA's, but hey, it could be a farm of GPU's.

AMD FX4130 + HDD, think I should under-clock it?

I'm too scared to go PiMP or BAMT...

thelonecrouton

legendary

Activity: 966

Merit: 1000

Quote from: Ignition75 on October 11, 2014, 06:29:00 AM

Quote from: thelonecrouton on October 11, 2014, 06:17:55 AM

Quote from: reflexmk on October 11, 2014, 05:53:25 AM

Quote from: Ignition75 on October 10, 2014, 10:13:53 PM

Damn I'm undervolting my rigs like a c*nt just to stay in the game...

I'm reduced now to playing around with Mobo voltages, to shave that extra 20 watts off per rig...

Grin

This is fun, I'm getting my nerd on...

Please do post settings/results and tips, power is expensive all around the world you know Grin

We need some way of attaching GPUs to a Raspberry Pi. 20 at a time.

Hells Yeah! Each rig is 170-ish watts before you look at GPU's... I've heard of some funky PCIe adaptors that allow you to run stacks of cards per rig, perhaps it's time to start looking them up...

170W? Have you got i7's and multiple terabyte HD's in there?

My cheapest-available-Celeron, Asus H61 and BAMT on a USB stick rigs all pull about 96W idle, and 460ish with 5 270's running.

edit: a brief perusal of the intertubes seems to indicate that you can't connect anything PCI/PCIe to a Pi, they only have a USB bus. You can however attach FPGA's... if such a mythical beast for X11 is ever proven to exist.

Ignition75

sr. member

Activity: 462

Merit: 250

www.dashpay.io

Quote from: thelonecrouton on October 11, 2014, 06:17:55 AM

Quote from: reflexmk on October 11, 2014, 05:53:25 AM

Quote from: Ignition75 on October 10, 2014, 10:13:53 PM

Damn I'm undervolting my rigs like a c*nt just to stay in the game...

I'm reduced now to playing around with Mobo voltages, to shave that extra 20 watts off per rig...

Grin

This is fun, I'm getting my nerd on...

Please do post settings/results and tips, power is expensive all around the world you know Grin

We need some way of attaching GPUs to a Raspberry Pi. 20 at a time.

Hells Yeah! Each rig is 170-ish watts before you look at GPU's... I've heard of some funky PCIe adaptors that allow you to run stacks of cards per rig, perhaps it's time to start looking them up...

splawik21

legendary

Activity: 1372

Merit: 1005

DASH is the future of crypto payments!

POOL FRIENDLY REMINDER

multipool.us is on the 0.10.14.2 wallet Wink

thelonecrouton

legendary

Activity: 966

Merit: 1000

Quote from: reflexmk on October 11, 2014, 05:53:25 AM

Quote from: Ignition75 on October 10, 2014, 10:13:53 PM

Damn I'm undervolting my rigs like a c*nt just to stay in the game...

I'm reduced now to playing around with Mobo voltages, to shave that extra 20 watts off per rig...

Grin

This is fun, I'm getting my nerd on...

Please do post settings/results and tips, power is expensive all around the world you know Grin

We need some way of attaching GPUs to a Raspberry Pi. 20 at a time.

Ignition75

sr. member

Activity: 462

Merit: 250

www.dashpay.io

Quote from: reflexmk on October 11, 2014, 05:53:25 AM

Quote from: Ignition75 on October 10, 2014, 10:13:53 PM

Damn I'm undervolting my rigs like a c*nt just to stay in the game...

I'm reduced now to playing around with Mobo voltages, to shave that extra 20 watts off per rig...

Grin

This is fun, I'm getting my nerd on...

Please do post settings/results and tips, power is expensive all around the world you know Grin

I've noticed that each time I do around of under-volting my power goes down by 25% and my speed by 15%, so I make gains in that regards.

Right now, I'm running my 750ti rigs as stock, getting 15.4Mh/s @ 370watts. I OC'd them but the speed gains weren't power efficient.

My 270x Toxic Rigs, CoreClock 900, MemClock 1150, 1000mv is giving me 13.5 Mh/s @ 440watts.

For the Toxics, if I run stock clocks and voltages, they are up around the 19 Mh/s mark but sucking close to 800 watts.

Still playing with my 970 rig, I'll report back when I've settled on something...

Motherboard under-volting isn't going so well lol...

Topic: [ANN][DASH] Dash (dash.org) | First Self-Funding Self-Governing Crypto Currency - page 3802. (Read 9723733 times)