[ANN][DASH] Dash (dash.org) | First Self-Funding Self-Governing Crypto Currency - page 6118.

DieCommieScum

full member

Activity: 128

Merit: 100

Quote from: DieCommieScum on May 01, 2014, 05:27:46 PM

Quote from: DieCommieScum on April 26, 2014, 01:23:58 PM

Quote from: DieCommieScum on April 06, 2014, 04:42:11 PM

Shirt order update:

I have 3 spare shirts left on hand, two XL's and one XXL

Had a nightmare shipping international with the big order, so these are open to US only (sorry). $23usd in either dark or btc.

Still looking to sell these.

one of the XL's gone... still one remaining as well as a 2XL

Simcom

sr. member

Activity: 336

Merit: 250

Quote from: drkman on May 03, 2014, 06:08:03 PM

So which one is best to use?

PHM-sgminer or SPH-miner?

I use SPH-SGminer
https://bitcointalksearch.org/topic/ann-sph-sgminer-multi-coin-multi-algorithm-gpu-miner-added-marucoin-475795

coins101

legendary

Activity: 1456

Merit: 1000

Quote from: drkman on May 03, 2014, 06:08:03 PM

So which one is best to use?

PHM-sgminer or SPH-miner?

https://bitcointalksearch.org/topic/m.5246799

drkman

sr. member

Activity: 378

Merit: 250

So which one is best to use?

PHM-sgminer or SPH-miner?

AlexGR

legendary

Activity: 1708

Merit: 1049

GPU miners remember to check experimental intensity in sph-sgminer. I've used experimental intensity at 400 & 800 with slight increase in hashpower and less rejects.

Simcom

sr. member

Activity: 336

Merit: 250

Quote from: drkman on May 03, 2014, 05:49:24 PM

Quote from: girino on May 03, 2014, 04:49:58 PM

Quote from: Simcom on May 03, 2014, 04:12:13 PM

Quote from: girino on May 03, 2014, 03:44:31 PM

Quote from: Simcom on May 03, 2014, 03:29:56 PM

I think it's great you are trying to improve the code but SPH-SGminer already gives 2.3Mhash per 280x.

Afterburner overclock settings:
memclock: 1800
coreclock: 1180
power limit%: +20

My gigabyte board would freeze on anything higher than 1500/1100. I'm unable to test the code on those conditions! (i'm really impressed on this asus one)!

I only get 1.9mhs out of 280x's. Even when overclocked the sgminer updates with lag and the hashes vary wildly from 2.1 to 1.6 and they push past 70 degrees. What are the optimal settings in an sgminer bat file are you using and which sgminer? Thanks.

This link will help

https://docs.zoho.com/sheet/published.do?rid=12cbm2fe8ce55abb2476daa0f8c576b442d40&mode=html

If you have Asus card you can see my post on the last page for good settings. The Asus 280x is superior to the other brands from my testing.

goodluck0319

sr. member

Activity: 420

Merit: 250

the most I get both 290 non x is 2.3 Mh/s and not 2.5 Mh/s . both are xfx. one is ref 290 and other is not ref 290. both 270x are powercolor pc+.

this is my config:

]
,
"intensity" : "21,21,18,18",
"worksize" : "256,256,256,256",
"kernel" : "darkcoin",
"lookup-gap" : "2",
"thread-concurrency" : "20481,28500,8193,8193",
"gpu-engine" : "950,950,1120,1120",
"gpu-memclock" : "1250,1250,1425,1425",
"expiry" : "5",
"log" : "5",
"queue" : "0",
"gpu-powertune": "20",
"scan-time" : "1",
"device" : "0-3",
"no-submit-stale" : true,
"gpu-threads" : "1"
}

Simcom

sr. member

Activity: 336

Merit: 250

Quote from: goodluck0319 on May 03, 2014, 05:47:42 PM

•https://mega.co.nz/#!uAp12DYa!vhfp1wDb43mB1KCo_5ZfwXehYhBXeKcVYWbmkTB2ldg (DRK + Q2C + QRK + MYR + FC + INK + ANI + GRS + SIC + TWE + MARU)

is this the one?

Yes, make sure to download it from this post https://bitcointalksearch.org/topic/ann-sph-sgminer-multi-coin-multi-algorithm-gpu-miner-added-marucoin-475795

drkman

sr. member

Activity: 378

Merit: 250

Quote from: girino on May 03, 2014, 04:49:58 PM

Quote from: Simcom on May 03, 2014, 04:12:13 PM

Quote from: girino on May 03, 2014, 03:44:31 PM

Quote from: Simcom on May 03, 2014, 03:29:56 PM

I think it's great you are trying to improve the code but SPH-SGminer already gives 2.3Mhash per 280x.

Afterburner overclock settings:
memclock: 1800
coreclock: 1180
power limit%: +20

My gigabyte board would freeze on anything higher than 1500/1100. I'm unable to test the code on those conditions! (i'm really impressed on this asus one)!

I only get 1.9mhs out of 280x's. Even when overclocked the sgminer updates with lag and the hashes vary wildly from 2.1 to 1.6 and they push past 70 degrees. What are the optimal settings in an sgminer bat file are you using and which sgminer? Thanks.

Simcom

sr. member

Activity: 336

Merit: 250

Quote from: GhostPlayer on May 03, 2014, 05:21:00 PM

Quote from: girino on May 03, 2014, 04:55:58 PM

This wouldn't be accurate either. The correct phrase should be: I used some of the code from sph_miner with some of the code from cpuminer and some improvements of my own... As for getting the speeds people are getting with their 280x, thay are overclocking really high. My hardware does not support that, so i cannot test with the same settings as them. The best i can do is 2.5Gh/s with 1100/1500 OC.

So basically, you got code from free software, tweaked it around, and want to sell it ?

.!.

I'm happy with my 5x 280x Vapor-X doing 2.2mh/ each, totalling 650w (at the wall). You still havent answered, how much does your rig consume?

This is mining p2pool with I=18... on MPOS I use I=19 and get 2.2 - 2.3 MH/s

Quote

-k darkcoin -o http://q30.qhor.net:7903 -u Xdeq6pcN3cPsZtta6jsA286N4jbuwVn51D+0.00254200 -p x --auto-fan --gpu-fan 40-85 --temp-cutoff 92 --temp-overheat 88 --temp-target 64 -I 18 -g 1 -w 128 --lookup-gap 2 --thread-concurrency 8192 --gpu-powertune 20 --gpu-engine 1100 --gpu-memclock 1500

Try lowering the intensity - the reject rate is hurting your profits.

goodluck0319

sr. member

Activity: 420

Merit: 250

•https://mega.co.nz/#!uAp12DYa!vhfp1wDb43mB1KCo_5ZfwXehYhBXeKcVYWbmkTB2ldg (DRK + Q2C + QRK + MYR + FC + INK + ANI + GRS + SIC + TWE + MARU)

is this the one?

Simcom

sr. member

Activity: 336

Merit: 250

Quote from: coins101 on May 03, 2014, 05:45:57 PM

Just agreed to do it through PM. He is putting together a windows build for tomorrow. I have a meter which I will connect up.

Yea same - waiting for the windows build. Glad to hear you have a meter.

coins101

legendary

Activity: 1456

Merit: 1000

Quote from: Simcom on May 03, 2014, 05:40:36 PM

Quote from: coins101 on May 03, 2014, 05:37:18 PM

Quote from: Simcom on May 03, 2014, 05:14:35 PM

I am willing to test the miner on my asus cards - I suspect I will get higher than 2.3 if you are able to get 2.5 with an 1100/1500 OC.
In addition to asus 280x I also have several:

gigabyte 280x
msi 270x
gigabyte 290
msi 290

here is my 6 year reddit account
http://www.reddit.com/u/Simcom

Mod of
/r/Drkcoin
and head mod of /r/Nyancoins

I am also extremely active on this thread, contributing to technical discussions - https://bitcointalksearch.org/topic/m.6459044 etc.

+1

I'm doing a test on 2 x R9 290s.....Simcom is the top tester for this given the spread of GPUs that would represent a wider spectrum of the community.

Sadly I don't have a wattmeter - so I won't be able to test power consumption. I could give a pretty accurate measure of hashrate though. Any results with the 290s?

Just agreed to do it through PM. He is putting together a windows build for tomorrow. I have a meter which I will connect up.

Simcom

sr. member

Activity: 336

Merit: 250

Quote from: coins101 on May 03, 2014, 05:37:18 PM

Quote from: Simcom on May 03, 2014, 05:14:35 PM

I am willing to test the miner on my asus cards - I suspect I will get higher than 2.3 if you are able to get 2.5 with an 1100/1500 OC.
In addition to asus 280x I also have several:

gigabyte 280x
msi 270x
gigabyte 290
msi 290

here is my 6 year reddit account
http://www.reddit.com/u/Simcom

Mod of
/r/Drkcoin
and head mod of /r/Nyancoins

I am also extremely active on this thread, contributing to technical discussions - https://bitcointalksearch.org/topic/m.6459044 etc.

+1

I'm doing a test on 2 x R9 290s.....Simcom is the top tester for this given the spread of GPUs that would represent a wider spectrum of the community.

Sadly I don't have a wattmeter - so I won't be able to test power consumption. I could give a pretty accurate measure of hashrate though. Any results with the 290s?

coins101

legendary

Activity: 1456

Merit: 1000

Quote from: Simcom on May 03, 2014, 05:14:35 PM

Quote from: girino on May 03, 2014, 04:55:58 PM

Quote from: AlexGR on May 03, 2014, 04:33:12 PM

You actually wrote: "I made some speed improvements in the GPU miner listed on the first page."

The GPU miner listed on the first page is sph-sgminer, not the cpuminers.

The correct phraseology would be something like "I tweaked the cpu miners on the first page to work with openCL and now I'm getting better speeds than even sph-sgminer" (which from I gather from those posting their 280 results is not really slower).

This wouldn't be accurate either. The correct phrase should be: I used some of the code from sph_miner with some of the code from cpuminer and some improvements of my own... As for getting the speeds people are getting with their 280x, thay are overclocking really high. My hardware does not support that, so i cannot test with the same settings as them. The best i can do is 2.5Gh/s with 1100/1500 OC.

Quote from: AlexGR on May 03, 2014, 04:33:12 PM

Yeah well, this is cryptoland... you know how things go. Sorry I can't check your code to see if it works (I lack the skill) + I've uninstalled my GPUs due to rising temps.

That's ok, i'll keep looking for someone who can test it and has the trust of the community.

I am willing to test the miner on my asus cards - I suspect I will get higher than 2.3 if you are able to get 2.5 with an 1100/1500 OC.
In addition to asus 280x I also have several:

gigabyte 280x
msi 270x
gigabyte 290
msi 290

here is my 6 year reddit account
http://www.reddit.com/u/Simcom

Mod of
/r/Drkcoin
and head mod of /r/Nyancoins

I am also extremely active on this thread, contributing to technical discussions - https://bitcointalksearch.org/topic/m.6459044 etc.

+1

I'm doing a test on 2 x R9 290s.....Simcom is the top tester for this given the spread of GPUs that would represent a wider spectrum of the community.

Simcom

sr. member

Activity: 336

Merit: 250

Quote from: goodluck0319 on May 03, 2014, 05:27:49 PM

which miner can the most out of 290 and 270x gpu?

phm-sgminer - after optimization it will give 2.5mhash for 290 and 1.4mhash for 270x.

goodluck0319

sr. member

Activity: 420

Merit: 250

which miner can the most out of 290 and 270x gpu?

GhostPlayer

legendary

Activity: 1092

Merit: 1000

Quote from: feeleep on May 03, 2014, 05:21:27 PM

Quote from: feeleep on May 03, 2014, 10:16:51 AM

HI,

Update on drk.coinmine.pl pool: we were ddosed several times during last few hours (someone was pissed...), and right now pools are working, but websites are offline. We are working on bringing them back, but as I said backend is fully functional now (finding blocks, payouts, etc).

feeleep

short update - pool website is available again

feeeep

MINIMUM CASHOUT 10 DRKS !?!?!?!?

feeleep

legendary

Activity: 1197

Merit: 1000

Quote from: feeleep on May 03, 2014, 10:16:51 AM

HI,

Update on drk.coinmine.pl pool: we were ddosed several times during last few hours (someone was pissed...), and right now pools are working, but websites are offline. We are working on bringing them back, but as I said backend is fully functional now (finding blocks, payouts, etc).

feeleep

short update - pool website is available again

feeeep

GhostPlayer

legendary

Activity: 1092

Merit: 1000

Quote from: girino on May 03, 2014, 04:55:58 PM

This wouldn't be accurate either. The correct phrase should be: I used some of the code from sph_miner with some of the code from cpuminer and some improvements of my own... As for getting the speeds people are getting with their 280x, thay are overclocking really high. My hardware does not support that, so i cannot test with the same settings as them. The best i can do is 2.5Gh/s with 1100/1500 OC.

So basically, you got code from free software, tweaked it around, and want to sell it ?

.!.

I'm happy with my 5x 280x Vapor-X doing 2.2mh/ each, totalling 650w (at the wall). You still havent answered, how much does your rig consume?

This is mining p2pool with I=18... on MPOS I use I=19 and get 2.2 - 2.3 MH/s

Quote

-k darkcoin -o http://q30.qhor.net:7903 -u Xdeq6pcN3cPsZtta6jsA286N4jbuwVn51D+0.00254200 -p x --auto-fan --gpu-fan 40-85 --temp-cutoff 92 --temp-overheat 88 --temp-target 64 -I 18 -g 1 -w 128 --lookup-gap 2 --thread-concurrency 8192 --gpu-powertune 20 --gpu-engine 1100 --gpu-memclock 1500

Topic: [ANN][DASH] Dash (dash.org) | First Self-Funding Self-Governing Crypto Currency - page 6118. (Read 9724115 times)