Now I wish I bought more last night @ 0.00124
EDIT: Minstpal is ahead @ 0.0025!
Topic: [ANN][DASH] Dash (dash.org) | First Self-Funding Self-Governing Crypto Currency - page 6301. (Read 9723733 times)
April 18, 2014, 12:27:06 AM
It's up 25% in 10minutes, almost 0.002 now, order books are being swiped clean!
Now I wish I bought more last night @ 0.00124
EDIT: Minstpal is ahead @ 0.0025!
Now I wish I bought more last night @ 0.00124
EDIT: Minstpal is ahead @ 0.0025!
April 18, 2014, 12:21:47 AM
8 btc of that was me 
April 18, 2014, 12:13:16 AM
This is gonna have to correct, uh...right? Finding it hard not to panic buy. 
Correct? Its all up from here.
Lol. Cryptsy just swallowed an 11+ btc sell wall in about 60 seconds. Don't think I've ever seen something like that happen with DRK.
April 18, 2014, 12:03:43 AM
DarkSend R1 Official Release!
https://darkcointalk.org/threads/darksend-rc1-official-release.274
https://darkcointalk.org/threads/darksend-rc1-official-release.274
That just figures, IT JUST FIGURES!
I was gone all day, come back, almost have enough bitcoins mined (.01 needed) to get a deposit, so I can exchange it for Darkcoins and what happens? Evan announces a release candidate and once again, I will be paying a higher price for my dark! Evan, you're lucky I adore you, you munchkin!!!!
BTW, congrats and thanks
April 18, 2014, 12:01:42 AM
This is gonna have to correct, uh...right? Finding it hard not to panic buy.
Correct? Its all up from here.
April 17, 2014, 11:56:44 PM
This is gonna have to correct, uh...right? Finding it hard not to panic buy.
April 17, 2014, 11:48:26 PM
Not exactly sure what I'm doing wrong, or if it's just taking a while, but the test darksend transaction I sent out apparently hasn't gone through. Was looking on blockchain explorer and it appears under 'Outputs' flagged as 'Not yet redeemed.' It's been about 45 minutes, the DRK hasn't arrived at it's destination address yet.
post the transaction details.
http://chainz.cryptoid.info/drk/tx.dws?002052853793ba853f254b68514df5597b7e2dea23c7b2e77d53492f14253667.htm
I sent 10 DRK to test out darksend.
April 17, 2014, 11:46:25 PM
Not exactly sure what I'm doing wrong, or if it's just taking a while, but the test darksend transaction I sent out apparently hasn't gone through. Was looking on blockchain explorer and it appears under 'Outputs' flagged as 'Not yet redeemed.' It's been about 45 minutes, the DRK hasn't arrived at it's destination address yet.
post the transaction details.
April 17, 2014, 11:30:30 PM
Not exactly sure what I'm doing wrong, or if it's just taking a while, but the test darksend transaction I sent out apparently hasn't gone through. Was looking on blockchain explorer and it appears under 'Outputs' flagged as 'Not yet redeemed.' It's been about 45 minutes, the DRK hasn't arrived at it's destination address yet.
April 17, 2014, 11:04:57 PM
sounds good hope your right im going all in!
April 17, 2014, 11:02:41 PM
April 17, 2014, 11:02:09 PM
so where do we see the price going too, i see a lot of potential any ideas?
This thread's official estimate is $250, as prophecized by coins101.
April 17, 2014, 11:01:21 PM
so where do we see the price going too, i see a lot of potential any ideas?
To the Dark Side of the Moon, of course.
April 17, 2014, 10:41:01 PM
so where do we see the price going too, i see a lot of potential any ideas?
April 17, 2014, 10:28:42 PM
Yeah, apparently the correct daemon is showing version v0.10.3.4-35-g4d1ef63-beta, and the qt is v0.10.3.7-3-g4d1ef63-beta
Thank you.
April 17, 2014, 10:24:59 PM
Hmm...
My wallet.dat is encrypted and I did not enter my passphrase, yet my debug.log says:
And the "masternode list" command returns a list with my IP address on it.
My wallet.dat is encrypted and I did not enter my passphrase, yet my debug.log says:
Code:
2014-04-18 01:37:47 RegisterAsMasterNode
2014-04-18 01:37:47 Found unspent output equal to nValue
2014-04-18 01:37:47 Is capable master node!
2014-04-18 01:37:47 Adding myself to masternode list CTxIn(COutPoint(de7dc202c4237ec63718b461a020fde5cc8d29b6d0a18634b1965bc93c75e0c3, 0), scriptSig=)
2014-04-18 01:37:47 Found unspent output equal to nValue
2014-04-18 01:37:47 Is capable master node!
2014-04-18 01:37:47 Adding myself to masternode list CTxIn(COutPoint(de7dc202c4237ec63718b461a020fde5cc8d29b6d0a18634b1965bc93c75e0c3, 0), scriptSig=)
And the "masternode list" command returns a list with my IP address on it.
I just tried to duplicate that and it said:
$ ./darkcoind masternode start
error: {"code":-1,"message":"Your wallet is locked, passphrase is required\n"}
I issued no such command, just the usual:
./ darkcoind -daemon
and I still have the masternode=1 setting in my darkcoin.conf file as the old instructions said.
What IP addresses you see as active masternodes?
Was that the first time you ran as a masternode? Maybe it only needed to generate the hash for your wallet once and then afterwards you dont have to enter it.
I will check with Evan
That would have been possible with the last beta, make sure you're running v0.10.3.7.
Ah, yes. I accidentally started the old version.
It also spamed the log with a lot of signature errors which was another clue.The new version does need my password. -> Which (for various reasons) makes me a little uncomfortable and I might never enter.
April 17, 2014, 10:12:14 PM
That would have been possible with the last beta, make sure you're running v0.10.3.7.
Is this correct one ?
Code:
./darkcoind --help
DarkCoin version v0.10.3.4-35-g4d1ef63-beta
DarkCoin version v0.10.3.4-35-g4d1ef63-beta
Yeah, apparently the correct daemon is showing version v0.10.3.4-35-g4d1ef63-beta, and the qt is v0.10.3.7-3-g4d1ef63-beta
April 17, 2014, 10:09:34 PM
Any eta on darksending amounts > 10 DRK?
April 17, 2014, 10:07:25 PM
Yeah, it might be a bad choice of words to call theres masternodes.
May be it should have a name which does not suggest a hierarchy but reflects the purpose, for example: darknode, mixernode, dsmnode (dark send mixer/maintainer node) or something like that.
By the way, I see the development crossed the line where it's no longer safe for the average Joe to run a masternode.
You need to enter your wallet passphrase on the online machine, so now it can be easily stolen (keyloggers).
To tell the truth, I am not sure if I have the curage myself to do this (enter the passphrase without immediately sending every coins to new addresses). And I would not call myself neither a noob, nor a coward.
Any chance for binaries built for OpenWRT?
I think I want to give it a shot and run darkcoind on my router. May be I would be slightly more comfortable with that. It's easier to monitor because it's a lot smaller and simpler linux OS.
Q: What happens if I loose my IP address?
May be it should have a name which does not suggest a hierarchy but reflects the purpose, for example: darknode, mixernode, dsmnode (dark send mixer/maintainer node) or something like that.
By the way, I see the development crossed the line where it's no longer safe for the average Joe to run a masternode.
You need to enter your wallet passphrase on the online machine, so now it can be easily stolen (keyloggers).
To tell the truth, I am not sure if I have the curage myself to do this (enter the passphrase without immediately sending every coins to new addresses). And I would not call myself neither a noob, nor a coward.
Any chance for binaries built for OpenWRT?
I think I want to give it a shot and run darkcoind on my router. May be I would be slightly more comfortable with that. It's easier to monitor because it's a lot smaller and simpler linux OS.
Q: What happens if I loose my IP address?
If your masternode is down, the network will try to connect to you then it will use the next one and remove you from the list.
April 17, 2014, 10:04:52 PM
Quote
{
"connected_to_masternode" : "",
"current_masternode" : 4,
"is_connected_to_masternode" : false,
"state" : 2,
"entries" : 0,
"entries_accepted" : 0,
"signatures" : 0
}
"connected_to_masternode" : "",
"current_masternode" : 4,
"is_connected_to_masternode" : false,
"state" : 2,
"entries" : 0,
"entries_accepted" : 0,
"signatures" : 0
}
I'm assuming I can't connect to a master node and therefore cannot send darksend transactions? Any idea how to fix this?
You just need to DarkSend money and the client will connect. It doesn't always have an open connection to the masternode.
edit: "current_masternode" is bugged out and displaying wrong. I'll fix that tomorrow.
Jump to: