Really? REALLY?
I was able to keep away from gambling, but this is freakin tempting! I'm a terrible gambler (hence why I've come to cryptos, lol) UGH!
so am i lol
but 25% of dice proceedings go to the bounties list to help further our efforts :-)
Topic: [ANN][DASH] Dash (dash.org) | First Self-Funding Self-Governing Crypto Currency - page 6433. (Read 9723858 times)
March 30, 2014, 02:27:01 PM
Really? REALLY?
I was able to keep away from gambling, but this is freakin tempting! I'm a terrible gambler (hence why I've come to cryptos, lol) UGH!
so am i lol
but 25% of dice proceedings go to the bounties list to help further our efforts :-)
March 30, 2014, 02:24:57 PM
Really? REALLY?
I was able to keep away from gambling, but this is freakin tempting! I'm a terrible gambler (hence why I've come to cryptos, lol) UGH!
March 30, 2014, 02:22:00 PM
If I had my wallet stolen, what method can retrieve it?
This is basically the same as Bitcoin. If you lose your wallet, you lost it. Be careful be responsible. And I'm saying that with proper fear for my coin which I will put into cold storage as soon as Darksend is complete (or allows over 10 coins in a transaction, LOL)
March 30, 2014, 02:16:50 PM
Just figured out that Anoncoin is a fork from Litecoin
That probably means it would do well when ASICs for scrypt hit, but they may not have an active mining community?
That probably means it would do well when ASICs for scrypt hit, but they may not have an active mining community?
March 30, 2014, 02:16:21 PM
Nice ! Looks good !
still some problems, working with the programmer
I sent a few coins that didn't update. Transaction was just confirmed
yeah working on it.. seems like there is a glitch somewhere...
Working now.
Great! Solved then.
I hope your project will grow up !
Wish all best!
regards!
March 30, 2014, 02:15:08 PM
stupid question but how do I back up the wallet data from the old wallet ?
NOT STUPID at all!!! Very important to know how to back up your wallet, you could lose all your coin if you don't!!! Two ways.
1. With your wallet open, go to the menu File => Backup Wallet. Choose a location to save it and give it a name, I usually use the type of coin "Darkcoin_wallet.dat"
2. With the wallet closed, go to your wallet folder, in Windows, it's in C:/Users/AppData/Roaming/Darkcoin/ Find the wallet.dat file and copy it then save to another location. In Ubuntu at least, it's in your home file, hidden (so choose show hidden) and is called .darkcoin.
To restore a wallet, you can just load and sync a wallet, then replace the wallet.dat file with the one you saved
so when I back up the old xcoin wallet I need to find it in c: the copy it and add it to the new darkcoin wallet folder(anywhere in folder?)
So you have two distinct versions of "wallet.dat" ? One with the "old" address and one with the new ? And you have transferred 222 DRK from the old to the new one ?
yes exactly
Did you do this? and did it work?
March 30, 2014, 02:12:14 PM
seems like it doesnt matter what you do these days, ppl will try to say its a clone
http://www.quarkcoins.com/quark-clones.html
http://www.quarkcoins.com/quark-clones.html
Clone = identical copy, not "based-on but different in this/that way" / "inspired-by" / "evolution of" etc. Some people simply don't understand the definition.
yeah, thats why i wrote what i wrote on that site
besides, a clone is something where i just change a few parameters and the name,
not add extra stuff, or upgrade something to become better
and why start from sratch when the base system functions fully as it should, and you expect to add features to it.
starting from scratch = adding up to a year or more, in pure development, without knowing if its going to be a success, then its better to
evolve from where we are
Should Man have reinvented the wheel, cart, wagon, etc... before creating the car? LOL
March 30, 2014, 01:59:50 PM
Nice ! Looks good !
still some problems, working with the programmer
I sent a few coins that didn't update. Transaction was just confirmed
yeah working on it.. seems like there is a glitch somewhere...
Working now.
March 30, 2014, 01:53:46 PM
Nice ! Looks good !
still some problems, working with the programmer
I sent a few coins that didn't update. Transaction was just confirmed
should be fixed now :-)
March 30, 2014, 01:52:49 PM
Nice ! Looks good !
still some problems, working with the programmer
I sent a few coins that didn't update. Transaction was just confirmed
March 30, 2014, 01:50:54 PM
This new X11 algo is very interesting for me.
I'll spend some time to study on it.
I'll spend some time to study on it.
March 30, 2014, 01:34:29 PM
Announcing Distribute The Network Hashing Day! To help motivate users we’ve decided to provide a 0% fee for all users until further notice.
https://www.darkcointalk.org/threads/0-mining-fees-at-drkpool-com.173/
https://www.darkcointalk.org/threads/0-mining-fees-at-drkpool-com.173/
Distribute The Network Hashing Day.
p2pool Korea/Seoul fee set to Zero.
http://asia01.poolhash.org:7903
http://asia02.poolhash.org:7903
March 30, 2014, 01:26:29 PM
Nice ! Looks good !
still some problems, working with the programmer
March 30, 2014, 01:22:28 PM
So I have a question for the community here about X11 mining on Darkcoin:
I'm mining with two sapphire R9 290x Tri-X cards. I run SGminer 4.1.0 and use a .bat file to start it and CGwatcher to keep things going.
Usually I set my --gpu-threads value to "2,2" but recently I tried setting it as high as "10,10". When I do this then in SGminer I see my hashrate go up to about 3.5 to 3.7 MH/s per card (from my usual of 2.7). This is awesome, however I start getting boatloads of stale shares. On the dashboard on my pool (lotterymining or coinmine, either one) I see a super low hashrate of like 1.2 to 2.0 MH/s, when it should be up near 7.0 MH/s. Does anyone know why I start getting all these stale shares when I put the threads up?
I'm mining with two sapphire R9 290x Tri-X cards. I run SGminer 4.1.0 and use a .bat file to start it and CGwatcher to keep things going.
Usually I set my --gpu-threads value to "2,2" but recently I tried setting it as high as "10,10". When I do this then in SGminer I see my hashrate go up to about 3.5 to 3.7 MH/s per card (from my usual of 2.7). This is awesome, however I start getting boatloads of stale shares. On the dashboard on my pool (lotterymining or coinmine, either one) I see a super low hashrate of like 1.2 to 2.0 MH/s, when it should be up near 7.0 MH/s. Does anyone know why I start getting all these stale shares when I put the threads up?
Bump--anyone?
No, this coin has long-term potential.
Well in did it has! But this might be very hard to keep it on the right tracks!
I hope nothing bad will happen to it!
What are you talking about?
March 30, 2014, 01:17:05 PM
Nice ! Looks good !
March 30, 2014, 01:13:56 PM
March 30, 2014, 01:08:57 PM
Announcing Distribute The Network Hashing Day! To help motivate users we’ve decided to provide a 0% fee for all users until further notice.
https://www.darkcointalk.org/threads/0-mining-fees-at-drkpool-com.173/
https://www.darkcointalk.org/threads/0-mining-fees-at-drkpool-com.173/
March 30, 2014, 01:03:06 PM
So I have a question for the community here about X11 mining on Darkcoin:
I'm mining with two sapphire R9 290x Tri-X cards. I run SGminer 4.1.0 and use a .bat file to start it and CGwatcher to keep things going.
Usually I set my --gpu-threads value to "2,2" but recently I tried setting it as high as "10,10". When I do this then in SGminer I see my hashrate go up to about 3.5 to 3.7 MH/s per card (from my usual of 2.7). This is awesome, however I start getting boatloads of stale shares. On the dashboard on my pool (lotterymining or coinmine, either one) I see a super low hashrate of like 1.2 to 2.0 MH/s, when it should be up near 7.0 MH/s. Does anyone know why I start getting all these stale shares when I put the threads up?
I'm mining with two sapphire R9 290x Tri-X cards. I run SGminer 4.1.0 and use a .bat file to start it and CGwatcher to keep things going.
Usually I set my --gpu-threads value to "2,2" but recently I tried setting it as high as "10,10". When I do this then in SGminer I see my hashrate go up to about 3.5 to 3.7 MH/s per card (from my usual of 2.7). This is awesome, however I start getting boatloads of stale shares. On the dashboard on my pool (lotterymining or coinmine, either one) I see a super low hashrate of like 1.2 to 2.0 MH/s, when it should be up near 7.0 MH/s. Does anyone know why I start getting all these stale shares when I put the threads up?
Bump--anyone?
No, this coin has long-term potential.
Well in did it has! But this might be very hard to keep it on the right tracks!
I hope nothing bad will happen to it!
March 30, 2014, 12:44:17 PM
If I had my wallet stolen, what method can retrieve it?
This link might help you.
https://en.bitcoin.it/wiki/Securing_your_wallet
- have backup, or have private key
: Encrypted - depends on password length, transfer to another wallet(not to stolen wallet account)
: Non encrypted - depends on when you realize it.
- have no backup or have no private key
: Encrypted - No way
: Non encrypted - No way
March 30, 2014, 12:21:13 PM
So I have a question for the community here about X11 mining on Darkcoin:
I'm mining with two sapphire R9 290x Tri-X cards. I run SGminer 4.1.0 and use a .bat file to start it and CGwatcher to keep things going.
Usually I set my --gpu-threads value to "2,2" but recently I tried setting it as high as "10,10". When I do this then in SGminer I see my hashrate go up to about 3.5 to 3.7 MH/s per card (from my usual of 2.7). This is awesome, however I start getting boatloads of stale shares. On the dashboard on my pool (lotterymining or coinmine, either one) I see a super low hashrate of like 1.2 to 2.0 MH/s, when it should be up near 7.0 MH/s. Does anyone know why I start getting all these stale shares when I put the threads up?
I'm mining with two sapphire R9 290x Tri-X cards. I run SGminer 4.1.0 and use a .bat file to start it and CGwatcher to keep things going.
Usually I set my --gpu-threads value to "2,2" but recently I tried setting it as high as "10,10". When I do this then in SGminer I see my hashrate go up to about 3.5 to 3.7 MH/s per card (from my usual of 2.7). This is awesome, however I start getting boatloads of stale shares. On the dashboard on my pool (lotterymining or coinmine, either one) I see a super low hashrate of like 1.2 to 2.0 MH/s, when it should be up near 7.0 MH/s. Does anyone know why I start getting all these stale shares when I put the threads up?
Bump--anyone?
No, this coin has long-term potential.
Jump to: