Topic: [ANN][DOGEBC] DOGEBLACK SHA256 POD 4/5 Vote Cryptsy - page 36. (Read 77766 times)
And back down, then up, then down growl.
if anyone feels their hashrate should be higher on the pool after a few minutes, try using our middle port. that is where everyone seems to be and getting great results...
start was bumpy, had a bunch orphan because our diff. was too high, but now we are over 10th/s and many blocks are pouring in =]
again, we suggest using our goldmin.es:2323 port for now.
start was bumpy, had a bunch orphan because our diff. was too high, but now we are over 10th/s and many blocks are pouring in =]
again, we suggest using our goldmin.es:2323 port for now.
472DIFF OMG 
Anyone know why my 1TH machine only run at 500Gh ?
Are you renting a 1TH machine, or are you hosting yourself? I am hosting rigs to 2 renters who are both mining Dogeblack, and my rigs report the correct hashrate, but poolside the hashrate is showing up 20-40% lower and lots of rejects.
difficulty on whatever pool it is, is set too high.
we have three ports, we suggest using our middle one for now. hashrates are reflecting properly, and lots of rigs are pointed on us.
Anyone know why my 1TH machine only run at 500Gh ?
Are you renting a 1TH machine, or are you hosting yourself? I am hosting rigs to 2 renters who are both mining Dogeblack, and my rigs report the correct hashrate, but poolside the hashrate is showing up 20-40% lower and lots of rejects.
I'm running my neptune at home, well under half hash rate, and 50% invalids showing on pool?
Anyone know why my 1TH machine only run at 500Gh ?
Are you renting a 1TH machine, or are you hosting yourself? I am hosting rigs to 2 renters who are both mining Dogeblack, and my rigs report the correct hashrate, but poolside the hashrate is showing up 20-40% lower and lots of rejects.
our pool is over 3th/s! 
Anyone know why my 1TH machine only run at 500Gh ?
machine type ??Same here, my knc Neptune running at 1800 Ghs, should be 3.5Th normally?
Everything OK with suchpool?
Anyone know why my 1TH machine only run at 500Gh ?
machine type ??
Anyone know why my 1TH machine only run at 500Gh ?
all is well on our end. finding lots of blocks
were finding so many blocks but none are confirming?!
neptune only hashing at 500ghs, instaead of 3Ths, any ideas why guys?
http://x11-x13-pool.org/ 72.083 TH/s
Because diff is low power is high block found very fast hence the rejections
Waiting then diff became is normal the be all right=)
Waiting then diff became is normal the be all right=)
Why i got so many reject 
7000pool is up
Jump to: