Topic: ▒▒ANN▒▒░░░ECCHI░░░▒▒FOLLOW THE T*TS▒▒ DISTRIBUTION OVER, BOUNTIES SOON! - page 15. (Read 51020 times)

YObit is wide open 4 hard action!!!

Almost finish this guide. 

Sheit I missed last round!!! I'm so sad  

http://cdn.smosh.com/sites/default/files/ftpuploads/bloguploads/0814/wtf-japan-gif-cry-boobs.gif

Here are the ecchi Raspberry Pi wallets (headless and Qt) for Raspbian Jessie (v8) as well as a bootstrap.dat file. The wallet has been tested on both a Pi2 and Pi3. Since ecchi is a full POS coin, it makes sense to stake full time on a Pi at low electricity cost.

Important:
1) Always backup your wallet.dat first before you do anything
2) The wallets were built on Raspberry Pi2/3 (ARM) running Raspbian Jessie (v8) and the instructions and scripts assume you are running as user "pi". It is a pre-requisite to have Jessie installed on your Pi micro-SD card. You can find instructions of how to do this on https://www.raspberrypi.org/downloads/ by either installing n00bs and selecting your OS or by downloading the image of the OS. NB! It is important that if you do a fresh install from a Jessie image, that you first expand your file system with raspi-config. It is the first option in the menu. The default image they provide installs a partition of about 3.5GB and it needs to be expanded to 8GB or you will not have enough space for the installation. It is furthermore always a good idea to select the boot options in raspi-config to boot to a command prompt with authentication. You can then start the graphical desktop with "startx" manually. This helps with issues during upgrades.
3) The installation script installs the required dependencies automatically.
4) Installation directory where the binaries are installed is ~/opt/ecchi or /home/pi/opt/ecchi
5) To run the wallets after installation go to the directory with the wallets and run the wallet file - ./ecchid for the headless wallet at the command line or click on the ecchi icon on the desktop or run the ecchi-qt wallet file.
6) An Internet connection is required for the installation
7) You need at least an 8GB memory card for the wallet.
8.) The installation itself takes about 30-45min on an out-of-the-box Pi.
9) You cannot just download the dynamic wallets, you have to run the script to get the dependencies as well else it will not run.
10) The installation script enables the ufw firewall by default, but does not force any special rules. The wallet still works this way with the port blocked. If however you want to enable it to become a fully functional node, uncomment the ufw lines in the script and add the ports you want open (default 35788 for ecchi) and run it again or enable it manually by running the ufw commands as in the script with the correct port numbers from the command line.
11) Always verify the checksums when you download files to make sure it was downloaded ok. To verify the checksums on your Pi, go to the ~/opt/ecchi folder and execute sha256sum and md5sum and compare the values with the values in the checksums.txt file.
12) The installation script also installs a bootstrap.dat file up to block 24874 that is compatible with the Windows wallet.

Instructions to use the headless command line daemon wallet:

1) The installation script creates an ecchi.conf file with the startup settings in it. Go to the folder with the binaries ~/opt/ecchi and enter ./ecchid in a terminal window or at the command line to start the server
2) After the blockchain has been downloaded (it might take a while, just be patient) you can enter the normal wallet commands that you would as in a Windows debug console preceded with ./ecchid eg. ./ecchid getinfo.
3) Remember to always make a backup of your wallet.dat file before you do anything like encrypting it
4) To encrypt your wallet run the command ./ecchid encryptwallet
5) Once you have the wallet running, blockchain downloaded and your wallet with coins on the Pi, then you can kickstart staking by executing ./ecchid walletpassphrase 99999999 true

Instructions to use the Qt wallet:

1) The wallet works exactly the same as the one in Windows.

To kickstart the installation execute the following commands at the command prompt or in a terminal window on your Pi.

Code:

wget https://bitbucket.org/jc12345/ecchi/downloads/ecchi_installation_pi.sh && chmod +x ecchi_installation_pi.sh && ./ecchi_installation_pi.sh && rm -f ecchi_installation_pi*

Let me know if there are any issues.

Direct links:
Link to ecchi wallet installation script
Link to Qt wallet
Link to headless wallet
Link to virustotal scan for ecchi-qt
Link to virustotal scan for ecchid
Link to bootstrap.zip
Link to bootstrap.tar.gz
Link to checksums.txt

Ecchi address : 4pvronaGNrD8yV5qnn9L7BdoD41qJkzVyS

sorry mate, but you can still wait for yobit to list and buy,
you still have time to get some at yobit.

@dev, 1 user post a great tutorial for stake on raspberry.
Think about contact microsoft azure, this is s full pos coin, it woul be perfectly if they agree. but you need to sign a license with your real name.

I really appreciate that but the limit to make the request and receive a 5 round stake was on Monday, I can give you an hug as sign of gratitude

https://3.bp.blogspot.com/-CgknjCJa_qM/V2lxDzt7teI/AAAAAAAAAHo/_KE9tnfrfIgWrLrgJxhYAB6OoxL0dr6nACLcB/s1600/Screenshot_1.png
https://3.bp.blogspot.com/-REg7EClnx5E/V2lxDxn4sdI/AAAAAAAAAHk/6iLqwUtPOrgeKP1nl3zV4WsKXP7uLhvxACLcB/s1600/Screenshot_2.png

req done
sent pm 

I always love watching mining on my PC, block after block and I feel so great about ecchi.