Hi guys,
I have added the premine adress to the OP. Block explorer will be up soon.
Also, we are discussing with the guys from Cryptorush and some other exchanges to get listed at their exchange. Although, we feel that getting listed into exchanges to early might work out wrong. How do you guys as a community think about this? We want to discuss with the community rather than just get listed. Or as some people say, ninja-listed.
Topic: [ANN][EFL] Electronic Gulden - NEWS! - ANDROID WALLET AVAILABLE! - page 59. (Read 106069 times)
March 20, 2014, 11:29:01 AM
March 20, 2014, 11:28:05 AM
Look, specially for the people who do not know how to solo mine.
http://lmgtfy.com/?q=solo+mining+guide
http://lmgtfy.com/?q=solo+mining+guide
That doesn't explain the longpolling thing i'm looking for.
It should be possible to setup another adres (from a pool) so that you don't put work in blocks that are solved already what causes the rejects.
March 20, 2014, 11:27:21 AM
Look, specially for the people who do not know how to solo mine.
http://lmgtfy.com/?q=solo+mining+guide
http://lmgtfy.com/?q=solo+mining+guide
lol, ouch
March 20, 2014, 11:22:07 AM
Look, specially for the people who do not know how to solo mine.
http://lmgtfy.com/?q=solo+mining+guide
http://lmgtfy.com/?q=solo+mining+guide
I know how to solomine I'm asking about this longpoll thing they're mentioning. Don't be a dick.
if your running a well setup... i dont think
maybe with bad configs or network problems you may get a faster block sync
March 20, 2014, 11:18:17 AM
Op, als dit de officiële e-munt voor Nederlanders wordt waarom is het dan niet groot aangekondigd? Hoeveel mensen zijn er van op de hoogte en hoe ga je ze op de hoogte brengen van de gratis coins voor iedereen?
Is er een wallet adres waar we de premine in de gaten kunnen houden?
Verder wie ben je dev? kun je ons garanderen dat je voor de lange termijn met dit project bezig bent? Ben je in staat om je coin te repareren/patchen mocht er iets misgaan?
Is er een wallet adres waar we de premine in de gaten kunnen houden?
Verder wie ben je dev? kun je ons garanderen dat je voor de lange termijn met dit project bezig bent? Ben je in staat om je coin te repareren/patchen mocht er iets misgaan?
March 20, 2014, 11:16:07 AM
anyone know how to make long polling work in a .conf file for cgminer?
add a failover server with stratum support
Was wondering if I could use the pool that has been setup. Never got such a high reject rate and trying to fix it.
Don't know how to write it in to test if it works.
pool should work, add this as second pool just like your first one in the .conf and add also in the next section "failover-only" : true,
but i guess it dont help you
March 20, 2014, 11:10:08 AM
Is there a reason no pool running sites are adding us? Bad code, or have we just been missed by the pool owners?
http://efl.multi-pool.eu/index.php?page=statistics&action=pool
Brilliant, thanks. This pool is working nicely for me
. March 20, 2014, 11:06:38 AM
Look, specially for the people who do not know how to solo mine.
http://lmgtfy.com/?q=solo+mining+guide
http://lmgtfy.com/?q=solo+mining+guide
March 20, 2014, 11:02:48 AM
anyone know how to make long polling work in a .conf file for cgminer?
add a failover server with stratum support
Was wondering if I could use the pool that has been setup. Never got such a high reject rate and trying to fix it.
Don't know how to write it in to test if it works.
March 20, 2014, 11:00:21 AM
anyone know how to make long polling work in a .conf file for cgminer?
add a failover server with stratum support
March 20, 2014, 10:58:45 AM
Thanks, that works. this is what happens when nobs...
March 20, 2014, 10:56:52 AM
Why Diff is not changing? What is retarget?
Well, the difficulty should be changing every 4500 blocks...
The difficulity will adjust every 4500 blocks. Dont worry.
Oh......should be KGW otherwise coin will be labeled as instamine.
Lurk moar.
March 20, 2014, 10:56:44 AM
anyone know how to make long polling work in a .conf file for cgminer?
March 20, 2014, 10:55:13 AM
Can't get it or pools to work, derp.
LQv7rANVHNoM4PzBB696BEXXNWyVX1NUsQ
LQv7rANVHNoM4PzBB696BEXXNWyVX1NUsQ
"coin.conf" is in the same folder as wallet, open it with notepad, delete everything, add these lines and save:
rpcuser=YOURUSERNAME
rpcpassord=YOURPASSWORD
addnode=54.72.71.60
addnode=95.96.192.87:11015
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1
gen=0
rpcport=21015
close the wallet, right click wallet, click 'create shortcut'
right click the shortcut you just made, click 'properties'
where it says 'target' go all the way to the end and add "-server" , save the shortcut
open the shortcut you just made and modified
wait for the wallet to sync with network, LEAVE THE WALLET OPEN
point your miners at 127.0.0.1:21015 with the YOURUSERNAME and YOURPASSWORD that you set in the "coin.conf" file
wait until you mine a block.
Thanks for instruks, love it. When I get to the end, the last is "\Egulden-qt.exe" , now I ad: -server and get this from Windows;
"not valid name, chek if path and file name is correct"
I also try: \server
and \-server
same error message
what am I doing bad ?
Post your full parameter string thingy here.
its;
C:\Users\elvis\Downloads\EGulden-win\EGulden-qt.exe\server
Change it to
C:\Users\elvis\Downloads\EGulden-win\EGulden-qt.exe -server
March 20, 2014, 10:53:34 AM
Can't get it or pools to work, derp.
LQv7rANVHNoM4PzBB696BEXXNWyVX1NUsQ
LQv7rANVHNoM4PzBB696BEXXNWyVX1NUsQ
"coin.conf" is in the same folder as wallet, open it with notepad, delete everything, add these lines and save:
rpcuser=YOURUSERNAME
rpcpassord=YOURPASSWORD
addnode=54.72.71.60
addnode=95.96.192.87:11015
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1
gen=0
rpcport=21015
close the wallet, right click wallet, click 'create shortcut'
right click the shortcut you just made, click 'properties'
where it says 'target' go all the way to the end and add "-server" , save the shortcut
open the shortcut you just made and modified
wait for the wallet to sync with network, LEAVE THE WALLET OPEN
point your miners at 127.0.0.1:21015 with the YOURUSERNAME and YOURPASSWORD that you set in the "coin.conf" file
wait until you mine a block.
Thanks for instruks, love it. When I get to the end, the last is "\Egulden-qt.exe" , now I ad: -server and get this from Windows;
"not valid name, chek if path and file name is correct"
I also try: \server
and \-server
same error message
what am I doing bad ?
Post your full parameter string thingy here.
its;
C:\Users\elvis\Downloads\EGulden-win\EGulden-qt.exe\server
March 20, 2014, 10:51:44 AM
Wow, another shitty countrycoin not officially endorsed or created by that country...
Don't you people see what you are doing to the altcoin community by supporting every stupid copycoin that comes out...
You are devaluing every other currency by hopping on the next gimmicky coin.
Don't you people see what you are doing to the altcoin community by supporting every stupid copycoin that comes out...
You are devaluing every other currency by hopping on the next gimmicky coin.
March 20, 2014, 10:47:18 AM
"blocks" : 27641,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.26378602,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 96286371,
"pooledtx" : 0,
"testnet" : false
seems good
i like the people from .nl especially for some openminded decisions, good luck with this!
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.26378602,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 0,
"networkhashps" : 96286371,
"pooledtx" : 0,
"testnet" : false
seems good
i like the people from .nl especially for some openminded decisions, good luck with this!
March 20, 2014, 10:46:18 AM
close wallet first
then open cmd in wallet folder (shift+right click; select 'open command window here')
then in that cmd you enter:
-server -rpcusername=whatever -rpcpassword=whatever -rpcport=whateverportyouuse -rpcallowip=127.0.0.1
hit enter, wallet opens.
now start the miner with with a .bat configured for solo-mining
this always works for me.
then open cmd in wallet folder (shift+right click; select 'open command window here')
then in that cmd you enter:
-server -rpcusername=whatever -rpcpassword=whatever -rpcport=whateverportyouuse -rpcallowip=127.0.0.1
hit enter, wallet opens.
now start the miner with with a .bat configured for solo-mining
this always works for me.
March 20, 2014, 10:37:17 AM
Can't get it or pools to work, derp.
LQv7rANVHNoM4PzBB696BEXXNWyVX1NUsQ
LQv7rANVHNoM4PzBB696BEXXNWyVX1NUsQ
"coin.conf" is in the same folder as wallet, open it with notepad, delete everything, add these lines and save:
rpcuser=YOURUSERNAME
rpcpassord=YOURPASSWORD
addnode=54.72.71.60
addnode=95.96.192.87:11015
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1
gen=0
rpcport=21015
close the wallet, right click wallet, click 'create shortcut'
right click the shortcut you just made, click 'properties'
where it says 'target' go all the way to the end and add "-server" , save the shortcut
open the shortcut you just made and modified
wait for the wallet to sync with network, LEAVE THE WALLET OPEN
point your miners at 127.0.0.1:21015 with the YOURUSERNAME and YOURPASSWORD that you set in the "coin.conf" file
wait until you mine a block.
Thanks for instruks, love it. When I get to the end, the last is "\Egulden-qt.exe" , now I ad: -server and get this from Windows;
"not valid name, chek if path and file name is correct"
I also try: \server
and \-server
same error message
what am I doing bad ?
Post your full parameter string thingy here.
March 20, 2014, 10:35:51 AM
Can't get it or pools to work, derp.
LQv7rANVHNoM4PzBB696BEXXNWyVX1NUsQ
LQv7rANVHNoM4PzBB696BEXXNWyVX1NUsQ
"coin.conf" is in the same folder as wallet, open it with notepad, delete everything, add these lines and save:
rpcuser=YOURUSERNAME
rpcpassord=YOURPASSWORD
addnode=54.72.71.60
addnode=95.96.192.87:11015
rpcallowip=127.0.0.1
daemon=1
server=1
listen=1
gen=0
rpcport=21015
close the wallet, right click wallet, click 'create shortcut'
right click the shortcut you just made, click 'properties'
where it says 'target' go all the way to the end and add "-server" , save the shortcut
open the shortcut you just made and modified
wait for the wallet to sync with network, LEAVE THE WALLET OPEN
point your miners at 127.0.0.1:21015 with the YOURUSERNAME and YOURPASSWORD that you set in the "coin.conf" file
wait until you mine a block.
Thanks for instruks, love it. When I get to the end, the last is "\Egulden-qt.exe" , now I ad: -server and get this from Windows;
"not valid name, chek if path and file name is correct"
I also try: \server
and \-server
same error message
what am I doing bad ?
Jump to: